G34485238230 CARLO GAVAZZI Parametri selezionati FUN Modulo di uscita MOU DIN-rail SUP CA IOS Uscita Dimmer ..

Dimmer, 2 outputs, 1 to 10 V Type G 3448 5238
Du line®
Fieldbus Installationbus
• Switching and dimming of adjustable ballasts 1 to 10 V
• 8 control-channel receiver
• For DIN-rail mounting
• LED-indications for Dupline® carrier and outputs
• Bulb-conserving soft-start function
• Channel coding by GAP 1605
• 4 lighting scenes
• Transmits the status of the dimming outputs
Product Description
Ordering Key
G 3448 5238 230
The G3448 5238 2-output lighting scene dimmer is a component of the Dupline Installation System. It allows different types of electronic ballasts to be operated and dimmed and enables up to 4 lighting arrangements (per output) to be stored, which can then be retrieved at any time. In addition, it transmits the status of the dimming out- put for every individual output. The dimmer setting which was selected last is stored as a "memory setting" in the
internal memory and is rese- lected next time the lighting is switched on via channel 1/5. A power failure will erase the memory setting. The bright- ness of the lighting scenes is preset at the factory in steps these settings cannot be altered. By the aid of push- button combinations or by means of the test unit, the lighting scenes can be unlocked, modified and also retrieved. The lighting is switched on via a bulb-pre- serving softstart facility.
Type: Dupline® "H4"- Housing Dimmer
8 Channels
2 outputs
1 to 10 V Analog
Power supply
Type Selection
Supply Ordering no.
230 VAC G 3448 5238 230
Supply Specifications
Power Supply
Rated operational voltage 230 VAC ±10% Power consumption 2 VA
Power dissipation Max. 4.5 W Frequency 50/60 Hz
Output Specifications
Ballast outputs 2
Dimming capacity 2 x 1 to 10 V
Max. load capacity 50 mA on each output
Dimming speed 3.6 s (10% - 100%)
Relay outputs 2
Max. switching voltage 250 VAC Load capacity 10 A
Response time 1 cycle:
≤ 272 ms @ 128 channels)
General Specifications
Power ON delay 1 s
Indication for
Power On LED, Green
Dupline® carrier LED, Yellow
Output On LED, Red (one per output)
Environment
Operating temperature 0° to +50°C/32° to +122°F
Humidity (non-condensing) Max. 85%
Housing H4-housing
Standards IEC 60669, EN 55022/
EN 50081-1 and EN 55024/ EN 50082-1
Specifications are subject to change without notice (19.04.2007) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group