BGP-COD-BAT CARLO GAVAZZI Parametri selezionati FUN Accessori MOU Portatile SUP Batteria Altro INFO1 Unita d..

Programming Unit
BGP-COD-BAT
Portable programming unit
Individual coding of every input or output
Group coding of an entire module
Reading of codes
Editing of channel codes
On/off-line coding of smart-house modules type B .... LED display 4 x 8 LEDs
5-key tactile keyboard
Battery powered
Easy-to-handle plug-type connection
Automatic power saving mode
PRODUCT SPECIFICATIONS
Output
Connection 6/6 modular socket
Display 4 x 8 dots
Type LED Size 1.8 mm
Keyboard Tactile keys
No. of keys 5
Cable BGP-COD-BAT to smart-house system
Connectors 2 x 6/6 modular plugs
Length 75 cm
GENERAL SPECIFICATIONS
Environment
Degree of protection IP 40
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (+32° to +122°F)
Storage temperature -20° to +60°C (-4° to +140°F)
Humidity (non-condensing) 20 to 80% RH
Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Material ABS, grey
Weight 225 g
SUPPLY SPECIFICATIONS
Power supply 9 V Alkaline
400 mAH Battery type IEC 6F22
Rated operational power
Stand-by < 25 µA Operating < 22 mA Battery lifetime Typ. 1 year
TYPE SELECTION
Supply Ordering no.
Internal battery BGP-COD-BAT
MODE OF OPERATION
The BGP-COD-BAT is a portable programming unit used for reading or programming channel code(s) of smart-house products.
Once the battery is installed, the BGP-COD-BAT is ready for use. Connect the cable be-tween the programming unit and a smart- house module type B..
5 keys provide the means of operating the BGP-COD-BAT: two keys are used for reading and programming, two keys for changing Groups and Channels and one key for selecting the desired Input/Output.
The current coding is displayed by
4 x 8 LEDs. The top row of LEDs displays the selected input or out- put. The two middle rows display the current channel group, while the bottom row displays the cur- rent channel code.
Low battery indication
When battery is low, the In/Out row of LEDs will roll centerwards in an eye-catching manner.
Warning
When using the BGP-COD-BAT you must connect the cable to the BGP-COD-BAT before connecting the cable to any smart-house mod- ule that is to be coded. Even so, the cable must first be removed
from the smart-house module before disconnecting it from the BGP-COD-BAT.
Without observing these precau- tions you may destroy the chip inside the smart-house module through static discharges.
Caution
To ensure long battery life, always remember to remove the cable from the smart-house modules. The smart-house modules will be kept in an inactive state as long as the BGP-COD-BAT is connected.
Additional information
Scope of supply:
1 x programming unit
BGP-COD-BAT
1 x cable
GAP CAB
1 x user manual
MAN BGP-COD-BAT
Not supplied:
1 x 9 V battery type 6LR61
Specifications are subject to change without notice (07.01.2008) - A product of the CARLO GAVAZZI Group