BSE-MAG CARLO GAVAZZI Parametri selezionati Altro INFO1 Sensore magnetico INFO2 Ø11x68 INFO3 Alimentato dal ..

Transmitter with Magnetic Prox. Switch Function
BSE-MAG
ABS housing, cylindrical Ø11 housing
Sensing distance: 8 mm
Supplied by smart-house
1.5 m. cable
Channel coding by BGP-COD-BAT with ADAPT 1605
GENERAL SPECIFICATIONS
Environment
Degree of protection IP 67
Pollution degree 3 (IEC 60664)
Operating temperature -20° to +50°C (-4° to +122°F) Storage temperature -20° to +70°C (-4° to +158°F)
Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Material
Housing PBT VALOX 325M Back PBT VALOX 325M Front PBT VALOX 325M Cable type PVC, grey, oil proof,
4 x 34 mm2
Cable length 1.5 m
Weight 40 g
INPUT SPECIFICATIONS
REDUCTION FACTORS
Inputs Magnetic proximity switch
Nominal sensing distance Sn 8 mm
Operating sensing distance Sa 5 mm ≤ Sa ≤ 15 mm
Release distance ≤ 30 mm
Response time ≤ 1 pulse train
The nominal sensing distance is reduced by the use of metal and alloys other than ST 37. Most important reduction factors for the inductive proximity switch are:
Stainless steel 0.6 x Sn Brass 0.4 x Sn Aluminium 0.3 x Sn Copper 0.2 x Sn
SUPPLY SPECIFICATIONS
Power supply Supplied by smart-house
Reverse polarity protection Yes
Rated operational current Typ. 550 µA
TYPE SELECTION
Housing Nominal sensing Ordering no. 1 channel
diameter distance (Sn) magnet-operated proximity switch
Ø 11 mm 8 mm BSE-MAG
MODE OF OPERATION
WIRING DIAGRAM
The BSE-MAG is an ordinary magnetic proximity switch, but with
a built-in smart-house transmitter.
Once a magnet is brought within sensing distance of the magnetic proximity switch, the channel in question is activated.
When the distance between magnet and transmitter exceeds 30 mm, the channel in question is deactivated.
Several transmitters coded to the same channel may be used within an application. In this case the channel turns ON if one of the connected magnetic proximity switches is activated.
It is necessary to use the wire adapter box, ADAPT 1605, together with the programming unit, BGP-COD-BAT, in order to program the channel.
Note:
After programming, the white, black and blue wires must be connect- ed to smart-house ground.
Brown
D + D -
Blue
White
Black
Specifications are subject to change without notice (12.09.2007) - A product of the CARLO GAVAZZI Group