Special features
IP30Protection Class IIPlastic enclosure with sheet steel door, white (RAL 9016)Note: To obtain protection class II, all devices installed on the mounting plate must be of the fully insulated type.
Type
Basic deviceInstallation distribution boardKLV multimedia
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
650 °C; meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2.5 Lifting
Does not apply to enclosures without lifting aids.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
10.9.3 Impulse withstand voltage
10.9.4 Testing of enclosures made of insulating material
Meets the product standard's requirements.
Fitted with:
2x single-way socket outlet
Device support rails
Microperforated mounting plate
Installation instructions
3D adjustment element for mounting designed to adjust the mounting depth by up to 18 mm
Cable retainer
Spirit level for leveling
Nail lugs
Wall trough
Device holder
Door/Frame
Used with
KLV multimedia
Basic device
Installation distribution board
Cable entry postion
Cable entries on top and bottom, side, back plate
Heat diss. ambient 35°C delta T:20°C flush mount individ. encl. top(IEC 60890)
Heat diss. ambient 35°C delta T:35°C flush mount individ. encl. top(IEC 60890)
Ambient operating temperature details
Application
Indoor (installation site)
Color
Traffic white (RAL 9016)
White
Frequency rating of contacts
Degree of protection
IK05 (impact resistance)
IP30
Other
Number of module space units per row
Protective shrouding material
Without shroud for protection against accidental contact
Material
Polystyren (plastic)
Sheet steel, powder-coated
Steel plate/plastic
Mounting method
DIN-compatible
Flush mounted (plaster)
Flush mounting
Number of cores (dual) - max
Number of mountable connection strips