G43111120 CARLO GAVAZZI Paramètres sélectionnés TYPE DE MODULE Capteur / Détecteur BOÎTIER Décentralisé ALIM..

Light Intensity Sensor
Type G 4311 1120
Du line®
Fieldbus Installationbus
• AnaLink transmitter with built-in light intensity sensor
• Measuring range: 0.1 LUX to 100 kLUX
• Uses only 1 channel
• Channel coding by GAP 1605
• Easily mountable
• Supplied by Dupline®
Product Description
Ordering Key
G 4311 1120
The analog light transmitter G43111120 makes it possible to convert analog light val- ues to be transmitted on the Dupline® bus.
The light value can be trans- mitted in parallel on 8 chan- nels, which are independent- ly programmable, and can thereby be compared to 8 different threshold values in
the Channel Generator G38900015 version 2.02 and activate field units accordingly. The design of the LUX makes it possible to mount the sensor discreetly, e.g. on walls.
No external power supply is required, since the sensor is supplied from the Dupline® signal wires.
Type: Dupline® LUX- housing Transmitter
No. of Channels
No. of Inputs
Type Selection
Supply Ordering no.
By Dupline® G 4311 1120
Supply Specifications
Power Supply Supplied by Dupline®
Rated operational current typ. 750 µA
General Specifications
Channel programming By GAP 1605 and special cable GAP-TPH-CAB
Channel assignment 1 channel, freely programmable
Environment
Degree of protection IP 44
Operating temperature -10 to +60°C (14 to +140°F)
Connection
Screw terminal Pin 1: GND (grey) Pin 2: Dupline® (red)
Sensor Specifications
Light measuring range 0.1 LUX to 100 kLUX Characteristic deviation -10% to + 10% Measuring errror over temp. range -30% to + 30% Response time 6s to 34s
Housing
Material Housing Lexan (Polycarbonate) Plug Nylon
Color Translucent / Offwhite
Dimensions (W x H x D) 40 x 83 x 43 mm
Specifications are subject to change without notice (12.01.2009) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group