RAP48A5 CARLO GAVAZZI Paramètres sélectionnés SYSTEME Montage sur circuit CATEGORIE DE COURANT 10 ACA ou moi..

Solid State Relays
PCB, 1-Phase ZS
Types RAP 40 A ., RAP 48 A .
· AC Solid State Relay for PCB mounting
· Zero switching
· Rated operational current: 3 or 5 AACrms
· Blocking voltage: Up to 1200 Vp
· Rated operational voltage: Up to 480 VACrms
· Input range: 3.5 to 40 VDC
4.5 to 40 VDC
· Isolation: OPTO (input-output) 4000 VACrms
· LED status indication
· Low off-state leakage current
· High surge ratings
Product Description
Ordering Key
RAP 48 A 5
The RAP-series from Carlo Gavazzi is a Solid State Relay family for socket- or PCB- mounting. With built-in LED status indication for control input, the relay is an ideal in- terface between PLC’s or other logic controls and load. The housing design and pack- ing allows automatic insertion and soldering.
The relay has been designed to switch inductive or resistive loads as long as enough attention is paid to the speci- fications stated in this data
sheet, e.g. max. current, ambi- ent temperature etc.
The use of optotriacs for gal- vanic separation together with alternistors as output devices give the most advanced per- formance. Additional snubbers are no longer necessary. The zero switching relay also works with inductive loads due to its high surge capability. An inter- nal heatsink optimizes the thermal resistance between chip and ambient air, thereby increasing the lifetime of the relay.
Solid State Relay (PCB) Switching mode Mounting type
Rated operational voltage
Housing type
Rated operational current
Type Selection
Switching mode Rated operational voltage Rated operational current Control voltage
A: Zero switching 40: 400 VACrms 3: 3 AACrms 3.5 to 40 VDC
48: 480 VACrms 5: 5 AACrms 4.5 to 40 VDC
Selection Guide
Rated operational Control voltage Rated operational current
voltage 3 AACrms 5 AACrms
400 VACrms 3.5 to 40 VDC RAP 40 A 3 RAP 40 A 5
480 VACrms 4.5 to 40 VDC RAP 48 A 3 RAP 48 A 5
General Specifications
RAP 40 A . RAP 48 A .
Operational voltage range 10 to 440 VACrms 20 to 530 VACrms
Blocking voltage ³ 1000 Vp ³ 1200 Vp Zero voltage turn-on £ 20 V £ 40 V Operational frequency range 45 to 65 Hz 45 to 65 Hz Power factor £ 0.2 £ 0.2
Approvals UL, CSA, VDE UL, CSA, VDE CE-marking Yes Yes
Specifications are subject to change without notice (28.02.2007) <#>