EI0601NACS CARLO GAVAZZI Paramètres sélectionnés MONTAGE Noyable BOÎTIER Ø6.5 PLAGE DE DETECTION Jusqu'à 2 m..

Proximity Sensors Inductive
Stainless Steel Housing
Types EI, Ø 6.5, M8, NAMUR
• Stainless steel housing, cylindrical
• Diameter: Ø 6.5, M8
• Short versions
• Sensing distance: 1 to 2 mm
• Output: NAMUR (DIN 19234)
• Protection: Reverse polarity
• 2 m cable
Product Description Ordering Key
EI 0601 NAC S
Proximity switch in Ø 6.5 and M8 housings. Made in accor- dance with NAMUR DIN 19
234. Short version in standard stainless steel housing. Ampli- fier relay SD ... is available.
Type
Housing diameter (mm) Rated operating dist. (mm) Output type
Housing material
Type Selection
Housing Rated operating distance Ordering no. diameter (Sn) NAMUR
Ø 6.5 mm 1 mm 1) EI 0601 NACS
M8 1 mm 1) EI 0801 NACS 1) For flush mounting in metal
M8 2 mm 2) EI 0802 NACS 2) For non-flush mounting in metal
Specifications
Rated operational volt. (Ue) 8.2 VDC (UB) 7 to 9 VDC
(6 to 35 VDC, all specifica-
tions not observed in extended supply range)
Self-inductance Max. 500 µH Self-capacitance Max. 120 nF Current consumption (Io) Activated: ≤1 mA
Not activated: ≥ 2.2 mA
Max.: 9.35 mA
Protection Reverse polarity Transient voltage ≤ 1 kV/0.5 J (prepared) Frequency of operating
cycles (f) EI 0601 2000 Hz
EI 0801 2000 Hz
EI 0802 1500 Hz
Assured operating dist. (Sa) 0 ≤ Sa ≤ 0.81 x Sn
Repeat accuracy (R) ≤ 5%
Hysteresis (H)
(Differential travel) Dependent on amplifier relay
Effective operating dist. (Sr) 0.9 x Sn ≤ Sr ≤ 1.1 x Sn Usable operating dist. (Su) 0.9 x Sr ≤ Su ≤ 1.1 x Sr Ambient temperature
Operating -25° to +70°C (-13° to +158°F)
Storage -30° to +80°C (-22° to +176°F)
Degree of protection IP 67
(Nema 1, 3, 4, 6, 13)
Housing material
Body Stainless steel (1.4301) Front Thermoplastic polyester Back Black PVC
Cable EI 06 2 m, 2 x 0.14 mm2
EI 08 2 m, 2 x 0.14 mm2
grey PVC, oil proof
Weight (cable included) EI 06 30 g
EI 08 50 g
Tightening torque EI 08 3.0 Nm (x)
7.0 Nm (y) Refer to "Terms Used" Technical information.
Approvals UL, CSA
CE-marking Yes
Specifications are subject to change without notice (29.07.09) 1