WM1496AV63LO2XXAX CARLO GAVAZZI Paramètres sélectionnés FONCTION Analyseur de puissance MONTAGE Tableau ALIM..

Energy Management
Power Analyzer
Type WM14 96 “Advanced version”
• Protection degree (front): IP65
• 2 digital outputs
• 16 freely configurable alarms with OR/AND logic linkable with up to 2 digital outputs
• RS422/485 serial output (MODBUS-RTU), iFIX SCADA
compatibility
Product Description
• Class 1 (kWh), Class 2 (kvarh)
• Accuracy ±0.5 F.S. (current/voltage)
• Power Analyzer
• Instantaneous variables read-out: 3 DGT
• Energies readout: 8+1 DGT
• System variables: VLL, VLN, An, Admd max, VA, VAdmd, VAdmd max, W, Wdmd, Wdmd max, var, PF, Hz, ASY
• Single phase variables: VLL, VLN, VLN min, VLN max, A, Amin, Amax, Admd, VA, W, Wdmd, Wmax, var, PF, PFmin
• Harmonic analysis (FFT) up to the 15th harmonic (cur-
rent and voltage)
• Four quadrant power measurement
• Energy measurements: total and partial kWh and kvarh
• Hour counter (5+2 DGT)
• TRMS meas. of distorted sine waves (voltages/currents)
• Universal power supply: 90 to 260 VAC/DC, 18 to 60 VAC/DC
• Front dimensions: 96x96mm
• Voltage asymmetry, phase sequence, phase loss control
How to order WM14-96 AV5 3 H R2 S1 AX
3-phase advanced power analyzer with integrated pro- gramming key-pad. Particu- larly recommended for the measurement of the main electrical variables.
Housing for panel mounting, with RS485 communication port or pulse and/or alarm outputs.
Model Range code System
Power supply
Output 1
Output 2
Option
Type Selection
Range codes
AV5: 380/660VL-L/1/5(6)AAC VL-N: 185 V to 460 V
VL-L: 320 V to 800 V
AV6: 120/208VL-L/1/5(6)AAC VL-N: 45 V to 145 V
VL-L: 78 V to 250 V
System
3 : 1, 2 or 3 phase, balanced/unbalanced load, with or without neutral
Power supply
Output 1
R2: 2-relay outputs
O2: 2-open collector outputs
Output 2
XX: None
S1: RS485/RS422 port
Options
Phase current: 0.03A to 6A
Neutral current: 0.09A to 6A
L: 18 to 60 VAC/VDC
H: 90 to 260 VAC/VDC
AX: advanced functions
Input specifications
Rated inputs System type: 3 - phase
Current 3 (By shunts) Voltage 4
Accuracy (display, RS485) with CT=1 and VT=1 AV5: (@25°C ±5°C, R.H. ≤60%) 1150W-VA-var, FS:230VLN,
400VLL AV6: 285W-VA-var, FS:57VLN, 100VLL
Current 0.25 to 6A: ±(0.5% FS +1DGT)
0.03Ato0.25A:±(0.5%FS+7DGT) Neutral current 0.25 to 6A: ±(1.5% FS +1DGT)
0.09Ato0.25A:±(1.5%FS+7DGT)
Phase-phase voltage ±(1.5% FS +1 DGT)
Phase-neutral voltage ±(0.5% FS + 1 DGT)
Active and Apparent power, 0.25 to 6A: ±(1% FS +1DGT)
0.03A to 0.25A: ±(1% FS
+5DGT)
Reactive power 0.25 to 6A: ±(2% FS +1DGT)
0.03A to 0.25A: ±(2% FS
+5DGT)
Active energy Class 1 (start up current: 30mA) Reactive energy Class 2 (start up current: 30mA) Frequency ±0.1Hz (48 to 62Hz) Harmonic distortion ±3% F.S. (up to 15th harmonic)
(F.S.: 100%)
Specifications are subject to change without notice WM14 96 A DS ENG 230508 1