Carrito:
0
producto
Productos
vacío
Ningún producto
$0.00
Total
Producto añadido correctamente a su carrito de la compra
Cantidad
Total
Hay 0 artículos en su carrito.
Hay 1 artículo en su cesta.
Total productos:
Total
Ver más grande
XW2R-P34G-C4 373002 XW2R0027M OMRON Bloque de Terminales Omron MIL-MIL Push-In 32 OUT
XW2R-P34G-C4
373002
XW2RP34GC4
OMRON
Bloque de Terminales Omron MIL-MIL Push-In 32 OUT
Controladores industriales (PLC) > Módulo de transferencia
Sistemas de Control > XW2
* Producto nuevo en su embalaje original con todas las garantías y certificaciones de OMRON
Más Información
▲- Hay modelos disponibles con tornillos Phillips, tornillos ranurados, conexiones de encaje a presión o E-CON.
- La disposición de terminales ayuda a conseguir un trabajo de cableado más sencillo.
- Los terminales de encaje a presión simplifican el cableado y hace que los bloques de terminales sean aún más fáciles de usar (en comparación con el XW2F de OMRON).
- Se puede montar en carril DIN.
Especificaciones y modelos disponibles
Ordering Information
Withpower supply terminals
e-CON Type
| Appearance | I/O Points | I/O | Mounted Connector model | Cable Connector model | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. |
|---|---|---|---|---|---|
| 8 Points | Input | XG4A-1431 (MIL Connector) XN2D-4471 (e-CON Connector) | XG4M-1430-T (MIL Connector) XN2A-1470 (e-CON Connector) | XW2R-N08GD-COM |
Input DeviceConnectors
XN2 e-CON Connectors
| Appearance | Number of poles | Description | Order code |
|---|---|---|---|
 | 4 | For Sensor | XN2A-1470 |
 | 4 | Relay Connector | XN2B-1470 |
Without powersupply terminals
Phillips screw
| Appearance 2 The mounted Connector shown inthe appearance illustration is a MIL Connector. | Mounted Connector model | Number of poles | Dimension A (mm) | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. | |
|---|---|---|---|---|---|
| MIL Connector | XG4A-2031 | 20 | 81.7 | XW2R-J20GD-T | |
| XG4A-3431 | 34 | 130.7 | XW2R-J34GD-T | ||
| XG4A-4031 | 40 | 151.7 | XW2R-J40GD-T | ||
| XG4A-5031 | 50 | 186.7 | XW2R-J50GD-T | ||
| XG4A-6031 | 60 | 221.7 | XW2R-J60GD-T | ||
| FCN Connector | FCN-364P040-AU | 40 | 151.7 | XW2R-J40FD-T | |
Slotted screw (rise up)
| Appearance 2 The mounted Connector shown inthe appearance illustration is a MIL Connector. | Mounted Connector model | Number of poles | Dimension A (mm) | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. | |
|---|---|---|---|---|---|
| MIL Connector | XG4A-2031 | 20 | 64.4 | XW2R-E20GD-T | |
| XG4A-3431 | 34 | 98.5 | XW2R-E34GD-T | ||
| XG4A-4031 | 40 | 113.5 | XW2R-E40GD-T | ||
| XG4A-5031 | 50 | 138.5 | XW2R-E50GD-T | ||
| XG4A-6031 | 60 | 163.5 | XW2R-E60GD-T | ||
| FCN Connector | FCN-364P040-AU | 40 | 113.5 | XW2R-E40FD-T | |
Push-in spring
| Appearance 2 The mounted Connector shown inthe appearance illustration is a MIL Connector. | Mounted Connector model | Number of poles | Dimension A (mm) | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. | |
|---|---|---|---|---|---|
| MIL Connector | XG4A-2031 | 20 | 64.4 | XW2R-P20GD-T | |
| XG4A-3431 | 34 | 98.5 | XW2R-P34GD-T | ||
| XG4A-4031 | 40 | 113.5 | XW2R-P40GD-T | ||
| XG4A-5031 | 50 | 138.5 | XW2R-P50GD-T | ||
| XG4A-6031 | 60 | 163.5 | XW2R-P60GD-T | ||
| FCN Connector | FCN-364P040-AU | 40 | 113.5 | XW2R-P40FD-T | |
Specifications
| Item | XW2R-N⬜ | XN2⬜ | XW2R-J⬜ | XW2R-E⬜ | XW2R-P⬜ | |
|---|---|---|---|---|---|---|
| Rated current | Power supply terminal block: 2 A, Connectors/e-CON Connectors: 1 A (However, rated current of e-CON Connector depends on the wires that are used.) | 3 A/pin (with AWG20 wires), 2 A/pin (with AWG22 wires), 1 A/pin (with AWG24 wires), 0.5 A/pin (with AWG26 or AWG28 wires) | 1 A | |||
| Rated voltage | 24 VDC | 32 VDC | 125 VAC, 24 VDC | |||
| Contact resistance | – | 30 mΩ max. (at 20 mV, 100 mA max.) | – | |||
| Insurationresistance | 100 MΩ min. (at 500VDC) | 103MΩ min. (at 500 VDC) | 100 MΩ min. (at 500 VDC) | |||
| Dielectricstrength | 500 VAC for 1 min (leakage current: 1 mA max.) | 1,000 VAC for 60 sec (leakage current: 1 mA max.) | 500 VAC for 1 min (leakage current: 1 mA max.) | |||
| Insertiondurability | – | 50 times | – | |||
| Ambient operating temperature | 0 to 55°C | –30 to 75°C 2 The operating temperature rangeis restricted by the maximum operating temperature of the cable. | 0 to 55°C | |||
| Applicable wires | Applicable wire sizes 2 This is the applicable range for the Power supply terminals. | AWG 24 to 14 (ferrules), AWG 28 to 14 (stranded wires), AWG 28 to 16 (solid wires) (Outer diameter of insulation must be 4 mm max) | Stranded wire 0.08 mm 2 (AWG28) to 0.5 mm 2 (AWG20) (Outer diameter of insulation must be 1.5 mm max) | AWG 22 to 16 (round or forked crimp terminals) AWG 26 to 16 (stranded or solid wires) | AWG 22 to 16 (ferrules) AWG 26 to 16 (stranded or solid wires) | AWG 24 to 14 (ferrules) AWG 28 to 14 (stranded or solid) (Outer diameter of insulation must be 4 mm max) |
| Stripped length | AWG28-16: 8 to 10 mm AWG14: 9 to 10 mm | – | 9 mm | 7 mm | AWG28-16: 8 to 10 mm AWG14: 9 to 10 mm | |
| Tightening | – | 0.5 N·m | 0.5 to 0.6 N·m | – | ||
Opiniones: (0) ▲
Ningún comentario por el momento.
Añadir comentario
ocultar
| Valoración: |
|
| Nombre: | |
| Email: | |
| Título: | |
| Opinión: | |
| ¿Recomienda la compra de este producto? | |
|
|
|
| Añadir comentario | |
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.