Free home mecanismos & din

BA-M-0.4.1

2CDG510011R0011

-

Actuador pers. DIN 4 canales,230V

ACTUADOR PERS. DIN 4 CANALES,230V

BA-M-0.4.1 Blind Actuator, 4-fold, 230 V, MDRC

BI-F-2.0.1

2CDG510002R0011

-

Entrada binaria 2 canales

ENTRADA BINARIA 2 CANALES

2 channels can be connected with conventional push-buttons or auxiliary contacts. The information of contact scanning can be used to control free@home actuators or for indicate status information. The contact scanning voltage are made available by binary input device. The devices are supplied by free@home bus, there is no additional power supply neccessary. The compact design allows the installation of conventionell 60 mm installation box or device box.

BI-F-4.0.1

2CDG510003R0011

-

Entrada binaria 4 canales

ENTRADA BINARIA 4 CANALES

4 channels can be connected with conventional push-buttons or auxiliary contacts. The information of contact scanning can be used to control free@home actuators or for indicate status inforamtion. The contact scanning voltage are made available by binary input device. The devices are supplied by free@home bus, there is no additional power supply neccessary. The compact design allows the installation of conventionell 60 mm installation box or device box.

BI-M-4.0.1

2CDG510004R0011

-

Entrada binaria DIN 4 canales, 230V

ENTRADA BINARIA DIN 4 CANALES, 230V

The device detects AC/DC signals of 10 - 230 V via 4 channels. The information of the signal evaluation can be used for controlling ABB-free@home® actuators or for recording status information.The bus can be connected via enclosed terminal block.

DA-M-0.4.1

DA-M-0.4.1

-

Actuador DIN 4 canales 230V

DP7-S-611

DP7-S-611

-

Pantalla táctil 7Free@Home BL

DP7-S-625

DP7-S-625

-

Pantalla táctil 7Free@Home AN

HA-M-0.12.1

2CDG510009R0011

-

Act.accionamiento electroválvula DIN 12 can.230V

Act.accionamiento electroválvula DIN 12

For controlling thermoelectric actuating drives in heating/cooling systems. The outputs are protected against short-circuit and overload. The bus can be connected via enclosed terminal block.

HA-M-0.6.1

2CDG510008R0011

-

Act.accionamiento electroválvula DIN 6 can.230V

Act.accionamiento electroválvula DIN 6 c

For controlling thermoelectric actuating drives in heating/cooling systems. The outputs are protected against short-circuit and overload. The bus can be connected via enclosed terminal block.

MSA-F-1.1.1-83

MSA-F-1.1.1-83

-

Det.mov./Actuador 1 canal

With select lens for detection with animal access. For automatic switching of ABB-free@home® actuators dependent on movement and brightness. Switch-off delay of the actuator can be programmed via the web interface of the System Access Point. For switching 127 V~/230 V~ consumers. With integrated switch actuator. Switching function is available also without prior programming (pre-configured). Configuration can be changed later via the web interface (groups, scenes, etc.). The bus can be connected via enclosed terminal block. When installing in the flush-mounted box, a spatial division between the bus cable and 127 V/230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes.