Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
MCR-S10-50-UI-SW-DCI-NC 2814744 PHOENIX CONTACT Current transducers
MCR-S10-50-UI-SW-DCI-NC
2814744
PHOENIX_CONTACT
Current transducers
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
More info
▲Key Commercial Data
| Orderkey | 2814744 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 243 (C-5-2017) |
| GTIN | 4017918169299 |
| Weight per Piece (excluding packing) | 135.680 g |
| Custom tariff number | 85437090 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | < 2000 m |
Input data
| Input | Current measuring input |
|---|---|
| Configurable/programmable | Yes, unconfigured |
| Input current range | 0 A ... 55 A (AC/DC) |
| Operate threshold | 0.8 % (of measuring range nominal value 50 A) |
| Setting range for min. input current | 0 A ... 9.5 A |
| Setting range for max. input current | 0 A ... 55 A |
| Impulse form | AC, DC or distorted currents |
| Overload capacity | Depending on through connected conductor |
| Surge strength | Depending on through connected conductor |
| Frequency measuring range | 15 Hz ... 400 Hz |
| Connection method | Through connection, diameter 10.5 mm |
Output data
| Output name | Voltage output / current output |
|---|---|
| Configurable/programmable | Yes, unconfigured |
| Voltage output signal | 0 V ... 10 V |
| 2 V ... 10 V | |
| -10 V ... 10 V | |
| 0 V ... 5 V | |
| 1 V ... 5 V | |
| -5 V ... 5 V | |
| 10 V ... 0 V | |
| 10 V ... 2 V | |
| 10 V ... -10 V | |
| 5 V ... 0 V | |
| 5 V ... 1 V | |
| 5 V ... -5 V | |
| Current output signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| 20 mA ... 0 mA | |
| 20 mA ... 4 mA | |
| Load/output load voltage output | > 10 kΩ |
| Load/output load current output | < 500 Ω |
Switching output
| Output name | Relay output |
|---|---|
| Contact type | 1 PDT |
| Contact material | AgSnO, hard gold-plated |
| Maximum switching voltage | 30 V AC |
| 36 V DC | |
| 250 V AC (when the gold layer is destroyed) | |
| Limiting continuous current | 50 mA |
| 2 A (when the gold layer is destroyed) | |
| Output name | Transistor output, pnp |
| Output voltage range | 19 V ... 29 V (supply voltage - 1 V) |
| Continuous load current | 80 mA (Not short-circuit proof) |
| Setting range of the threshold value | 1 % ... 110 % |
| Setting range of the response delay | 0.1 s ... 20 s |
| Status display | Yellow LED |
Connection data
| Connection method | Screw connection |
|---|---|
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 14 |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Stripping length | 8 mm |
| Screw thread | M3 |
General
| Maximum transmission error | < 0.5 % (of nominal range value under nominal conditions) |
|---|---|
| Temperature coefficient, typical | < 0.025 %/K |
| Step response (10-90%) | 330 ms (with AC) |
| 40 ms (with DC) | |
| Status display | Green LED |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Rated insulation voltage | 300 V AC (to earth) |
| Test voltage input/output | 4 kV (50 Hz, 1 min.) |
| Test voltage input/power supply | 4 kV (50 Hz, 1 min.) |
| Test voltage output/power supply | 500 V (50 Hz, 1 min.) |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Color | green |
| Housing material | Polyamide PA non-reinforced |
| Mounting position | any |
| Conformance | CE-compliant |
| UL, USA/Canada | Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X |
| Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC directive |
|---|---|
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Connection in acc. with standard | CUL |
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Conformance | CE-compliant |
| UL, USA/Canada | Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X |
| Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss 5.027210190eCl@ss 5.127200300eCl@ss 6.027210100eCl@ss 7.027210123eCl@ss 8.027210123eCl@ss 9.027210123
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes |
|
| PHOENIX CONTACT-2814744-MCR-S10-50-UI-SW-DCI-NC | 128 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.