MINI MCR-SL-F-UI-SP-NC 2902833 PHOENIX CONTACT The configurable frequency transducer is suitable for the con.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

MINI MCR-SL-F-UI-SP-NC 2902833 PHOENIX CONTACT The configurable frequency transducer is suitable for the con..

MINI MCR-SL-F-UI-SP-NC

2902833

PHOENIX_CONTACT

Available

Ship on today

The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as for sensors with NPN and PNP outputs. Configurable via DIP switch and teach-in wheel. Spring-cage connection, standard configuration.

More details


* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$179.39
2+$174.82
3+$172.55
4+$171.10
5+$170.51
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Product description

The configurable 3-way isolated frequency transducer is suitable for the connection of NAMUR proximity sensors (IEC 60947-5-6 and EN 50227) as well as for sensors with NPN and PNP outputs that generate a frequency signal.

The measured values are converted into a linear current or voltage signal.

The device is configured via DIP switches. Alternatively, the frequency range can be configured with extended options via the teach-in wheel. The measuring transducer supports fault monitoring.

Dimensions

Width6.2 mm
Height93.1 mm
Depth102.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 65 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Degree of protectionIP20

Input data

Frequency inputFrequency input
Configurable/programmableYes
Frequency measuring range0.002 Hz ... 20 kHz (DIP switch)
Available input sourcesNPN/PNP transistor outputs
NAMUR initiators
Floating relay contact (dry contact)
Max. input amplitude30 V (incl. DC voltage)

Output data

Output nameVoltage output
Number of outputs1
Configurable/programmableYes
Voltage output signal0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
10 V ... 0 V
Current output signal0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Max. output voltageapprox. 12.3 V
Max. output current24.6 mA
Load/output load voltage output≥ 10 kΩ
Load/output load current output500 Ω (at 20 mA)

Output data

Step response (0–99%)< 35 ms (At f > 500 Hz)

Power supply

Supply voltage range9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption< 28 mA (at IOUT = 20 mA, 24 V DC, load 500 Ω)
Power consumption< 800 mW (at IOUT = 20 mA, 9.6 V DC, load 500 Ω)

Connection data

Connection methodSpring-cage connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Stripping length8 mm

General

No. of channels1
Maximum temperature coefficient0.01 %/K
Status displayLED red
Operating elementsPress/slide button
Protective circuitTransient protection
Electrical isolationBasic insulation according to EN 61010
Overvoltage categoryII
Pollution degree2
Rated insulation voltage50 V AC/DC
Test voltage, input/output/supply1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Colorgreen
Housing materialPBT
Mounting positionany
Assembly instructionsThe T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ConformanceCE-compliant
ATEXEx II 3 G Ex nA IIC T4 Gc X
UL, USA / CanadaUL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC
Certificate of classificationDNV GL 14085-15HH

EMC data

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Typical deviation from the measuring range final value0.1 %
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Typical deviation from the measuring range final value2 %
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Typical deviation from the measuring range final value0.3 %

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2902833-MINI MCR-SL-F-UI-SP-NCEnglish115 KbytesPHOENIX CONTACT-2902833-MINI MCR-SL-F-UI-SP-NC

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or