Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
EIK1-SVN-24P 2940799 PHOENIX CONTACT Solid-state relay module
EIK1-SVN-24P
2940799
PHOENIX_CONTACT
Solid-state relay module
Industrial Relays
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
More info
▲Key Commercial Data
| Orderkey | 2940799 |
|---|---|
| Packing unit | 10 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 452 (C-5-2017) |
| GTIN | 4017918080242 |
| Weight per Piece (excluding packing) | 21.100 g |
| Custom tariff number | 85364190 |
| Country of origin | CN (China) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 50 °C |
|---|---|
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
Input data
| Designation | Supply |
|---|---|
| Input voltage range | 18.5 V DC ... 28.8 V DC (UVN, see derating curve) |
| Typical input current at UN | 70 mA |
| Max. current consumption | 70 mA (at 50 mA output current) |
| Operating voltage display | Green LED |
| Type of protection | Reverse polarity protection |
| Protective circuit/component | Polarity protection diode |
| Transmission frequency | 1 kHz |
| Designation | Control circuit |
| Nominal input voltage UN | 8.2 V DC ±10 % |
| Indication | visual short-circuit and wire break control with LED (red) |
| Type of protection | 12 V Zener diode |
| Protective circuit/component | 12 V Zener diode |
| Transmission frequency | 1 kHz |
| Switching point | ≥ 2.1 mA (In conductive state) |
| ≤ 1.2 mA (In blocking state) | |
| 6.3 mA ... 10 mA (in the event of a short-circuit) | |
| 0 mA ... 0.35 mA (In the event of a wire break) | |
| Switching hysteresis | approx. 0.2 mA |
| Internal resistance | approx. 1 kΩ |
Output data
| Designation | Signal output |
|---|---|
| Output nominal voltage | ≤ 100 mV (In conductive state) |
| UVN- UR;in blocking state | |
| Limiting continuous current | 50 mA |
| Voltage drop at max. limiting continuous current | ≤ 1.5 V (UR) |
| Type of protection | 36 V Zener diode as free-wheeling diode |
| Protective circuit/component | 36 V Zener diode as free-wheeling diode |
Connection data, input side
| Connection name | Input side |
|---|---|
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Torque | 0.5 Nm |
Connection data, output side
| Connection name | Output side |
|---|---|
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Torque | 0.5 Nm |
General
| Type of note | Note on application |
|---|---|
| Note | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
| Designation | Air clearances and creepage distances |
| Standards/regulations | IEC 60664 |
| EN 61000-6-2 | |
| EN 61000-6-4 | |
| Degree of pollution | 2 |
| Overvoltage category | III |
Standards and Regulations
| Designation | Air clearances and creepage distances |
|---|---|
| Standards/regulations | IEC 60664 |
| EN 61000-6-2 | |
| EN 61000-6-4 | |
| Degree of pollution | 2 |
| Overvoltage category | III |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes |
|
| PHOENIX CONTACT-2940799-EIK1-SVN-24P | 142 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.