VAL-MS 385/80/3+1 2920971 PHOENIX CONTACT Type 2 surge arrester for 5-wire power supply systems (L1, L2, L3,.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

VAL-MS 385/80/3+1 2920971 PHOENIX CONTACT Type 2 surge arrester for 5-wire power supply systems (L1, L2, L3,..

VAL-MS 385/80/3+1

2920971

PHOENIX_CONTACT

Available

Ship on today

Type 2 surge arrester for 5-wire power supply systems (L1, L2, L3, N, PE), with connector latching.

More details


Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$246.32
2+$240.54
3+$237.67
4+$237.08
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Height90 mm
Width71.2 mm
Depth77.5 mm
Horizontal pitch4 Div.

Ambient conditions

Degree of protectionIP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (half sinus / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

General

Standards/specificationsIEC 61643-11 2011
EN 61643-11 2012
IEC test classificationII
T2
EN typeT2
IEC power supply systemTT
TN-C
TN-S
Number of portsOne
SPD designCombination type
Mode of protectionL-N
L-PE
N-PE
Mounting typeDIN rail: 35 mm
Colorjet black RAL 9005
Housing materialPA 6.6
PBT
Degree of pollution2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Surge protection fault messageoptical

Protective circuit

Nominal voltage UN240/415 V AC (TN-S)
240/415 V AC (TT)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous operating voltage UC (L-N)385 V AC
Maximum continuous operating voltage UC (L-PE)358 V AC
Maximum continuous voltage UC (N-PE)264 V AC
Rated load current IL80 A
Residual current IPE≤ 5 µA
Standby power consumption PC≤ 690 mVA
Nominal discharge current In (8/20) µs40 kA
Maximum discharge current Imax (8/20) µs80 kA
Impulse discharge current (10/350) µs (L-N), charge1.25 As
Impulse discharge current (10/350) µs (L-N), specific energy1.56 kJ/Ω
Impulse discharge current (10/350) µs (L-N), peak current value Iimp2.5 kA
Impulse discharge current (10/350) µs (L-PE), charge1.25 As
Impulse discharge current (10/350) µs (L-PE), specific energy1.56 kJ/Ω
Impulse discharge current (10/350) µs (L-PE), peak current value Iimp2.5 kA
Impulse discharge current (10/350) µs (N-PE), charge5 As
Impulse discharge current (10/350) µs (N-PE), specific energy25 kJ/Ω
Impulse discharge current (10/350) µs (N-PE), peak current value Iimp10 kA
Total discharge current ITotal (8/20) µs80 kA
Total discharge current ITotal (10/350) µs10 kA
Follow current interrupt rating Ifi (N-PE)100 A (264 V AC)
Short-circuit current rating ISCCR25 kA
Voltage protection level Up (L-N)≤ 2 kV
Voltage protection level Up (L-PE)≤ 2 kV
Voltage protection level Up (N-PE)≤ 1.7 kV
Residual voltage Ures (L-N)≤ 2 kV (at In)
≤ 1.4 kV (at 10 kA)
≤ 1.25 kV (at 5 kA)
≤ 1.2 kV (at 3 kA)
Residual voltage Ures (L-PE)≤ 2 kV (at In)
≤ 1.5 kV (at 10 kA)
≤ 1.4 kV (at 5 kA)
≤ 1.3 kV (at 3 kA)
Residual voltage Ures (N-PE)≤ 0.6 kV (at In)
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.4 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs (N-PE)≤ 1.7 kV
TOV behavior at UT (L-N)480 V AC (5 s / withstand mode)
457 V AC (120 min / withstand mode)
TOV behavior at UT (N-PE)1200 V AC (200 ms / withstand mode)
Response time tA (L-N)≤ 25 ns
Response time tA (L-PE)≤ 100 ns
Response time tA (N-PE)≤ 100 ns
Max. backup fuse with branch wiring250 A (gG)
Max. backup fuse with V-type through wiring80 A (gG - 16 mm²)

Connection data

Connection methodScrew connection
Conductor cross section flexible1.5 mm² ... 25 mm²
Conductor cross section solid1.5 mm² ... 35 mm²
Conductor cross section AWG15 ... 2
Screw threadM5
Tightening torque4.5 Nm
Stripping length16 mm

UL specifications

SPD Type4CA
Maximum continuous operating voltage MCOV (L-L)770 V AC
Maximum continuous operating voltage MCOV (L-N)385 V AC
Maximum continuous operating voltage MCOV (L-G)385 V AC
Maximum continuous operating voltage MCOV (N-G)264 V AC
Nom. voltage415/240 V AC
Mode of protectionL-L
L-N
L-G
N-G
Power distribution system3Y
Nominal frequency50/60 Hz
Measured limiting voltage MLV (L-L)3860 V
Measured limiting voltage MLV (L-N)2710 V
Measured limiting voltage MLV (L-G)3730 V
Measured limiting voltage MLV (N-G)2590 V
Nominal discharge current In (L-L)20 kA
Nominal discharge current In (L-N)20 kA
Nominal discharge current In (L-G)20 kA
Nominal discharge current In (N-G)20 kA

UL connection data

Conductor cross section AWG10 ... 2
Tightening torque30 lbf-in.

[email protected]

[email protected] 4.027140201
[email protected] 4.127130801
[email protected] 5.027130801
[email protected] 5.127130801
[email protected] 6.027130805
[email protected] 7.027130805
[email protected] 8.027130806
[email protected] 9.027130806

ETIM

ETIM 2.0EC000941
ETIM 3.0EC000941
ETIM 4.0EC000941
ETIM 5.0EC000941

UNSPSC

UNSPSC 6.0130212010
UNSPSC 7.090139121610
UNSPSC 1139121610
UNSPSC 12.0139121610
UNSPSC 13.239121620

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2920971-VAL-MS 385/80/3+1English130 KbytesPHOENIX CONTACT-2920971-VAL-MS 385/80/3+1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or