VAL-MS 385/65/1+1 2921255 PHOENIX CONTACT Type 2 surge arrester for 3-wire power supply systems (L1, N, PE),.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

VAL-MS 385/65/1+1 2921255 PHOENIX CONTACT Type 2 surge arrester for 3-wire power supply systems (L1, N, PE),..

VAL-MS 385/65/1+1

2921255

PHOENIX_CONTACT

Available

Ship on today

Type 2 surge arrester for 3-wire power supply systems (L1, N, PE), with connector latching.

More details


Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$125.73
2+$122.18
4+$119.30
5+$118.49
7+$117.51
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Height90 mm
Width35.6 mm
Depth77.5 mm
Horizontal pitch2 Div.

Ambient conditions

Degree of protectionIP20
IP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g
Vibration (operation)7.5g

General

Standards/specificationsIEC 61643-11 2011
EN 61643-11 2012
IEC test classificationII
T2
EN typeT2
IEC power supply systemTT
TN-C
TN-S
Number of portsOne
SPD designCombination type
Mode of protectionL-N
N-PE
Mounting typeDIN rail: 35 mm
Colorblack
Housing materialPA 6.6
PBT
Degree of pollution2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Surge protection fault messageoptical

Protective circuit

Nominal voltage UN240 V AC (TN-S)
240 V AC (TT)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous operating voltage UC (L-N)385 V AC
Maximum continuous voltage UC (N-PE)264 V AC
Rated load current IL80 A
Residual current IPE≤ 5 µA
Standby power consumption PC≤ 231 mVA
Nominal discharge current In (8/20) µs (L-N)30 kA
Nominal discharge current In (8/20) µs (N-PE)40 kA
Maximum discharge current Imax (8/20) µs (L-N)65 kA
Maximum discharge current Imax (8/20) µs (N-PE)80 kA
Impulse discharge current (10/350) µs (L-N), charge1.25 As
Impulse discharge current (10/350) µs (L-N), specific energy1.56 kJ/Ω
Impulse discharge current (10/350) µs (L-N), peak current value Iimp2.5 kA
Impulse discharge current (10/350) µs (N-PE), charge5 As
Impulse discharge current (10/350) µs (N-PE), specific energy25 kJ/Ω
Impulse discharge current (10/350) µs (N-PE), peak current value Iimp10 kA
Total discharge current ITotal (8/20) µs80 kA
Total discharge current ITotal (10/350) µs5 kA
Follow current interrupt rating Ifi (N-PE)100 A (264 V AC)
Short-circuit current rating ISCCR25 kA
Voltage protection level Up (L-N)≤ 1.8 kV
Voltage protection level Up (N-PE)≤ 1.7 kV
Residual voltage Ures (L-N)≤ 1.8 kV (at In)
≤ 1.3 kV (at 10 kA)
≤ 1.2 kV (at 5 kA)
≤ 1.15 kV (at 3 kA)
Residual voltage Ures (L-PE)≤ 2 kV (at In)
≤ 1.5 kV (at 10 kA)
≤ 1.4 kV (at 5 kA)
≤ 1.3 kV (at 3 kA)
Residual voltage Ures (N-PE)≤ 0.6 kV (at In)
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.4 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs (N-PE)≤ 1.7 kV
TOV behavior at UT (L-N)480 V AC (5 s / withstand mode)
TOV behavior at UT (N-PE)1200 V AC (200 ms / withstand mode)
Response time tA (L-N)≤ 25 ns
Response time tA (L-PE)≤ 100 ns
Response time tA (N-PE)≤ 100 ns
Max. backup fuse with branch wiring250 A AC (gG)
Max. backup fuse with V-type through wiring80 A AC (gG - 16 mm²)

Connection data

Connection methodScrew connection
Conductor cross section flexible1.5 mm² ... 25 mm²
Conductor cross section solid1.5 mm² ... 35 mm²
Conductor cross section AWG15 ... 2
Screw threadM5
Tightening torque4.5 Nm
Stripping length16 mm

[email protected]

[email protected] 4.027140201
[email protected] 4.127130801
[email protected] 5.027130801
[email protected] 5.127130801
[email protected] 6.027130805
[email protected] 7.027130805
[email protected] 8.027130806
[email protected] 9.027130806

ETIM

ETIM 2.0EC000941
ETIM 3.0EC000941
ETIM 4.0EC000941
ETIM 5.0EC000941

UNSPSC

UNSPSC 6.0130212010
UNSPSC 7.090139121610
UNSPSC 1139121610
UNSPSC 12.0139121610
UNSPSC 13.239121620

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2921255-VAL-MS 385/65/1+1English119 KbytesPHOENIX CONTACT-2921255-VAL-MS 385/65/1+1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or