PSR-SPP-42-230UC/URM4/4X1/2X2B 2902936 PHOENIX CONTACT Single-channel or two-channel contact extension with .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSR-SPP-42-230UC/URM4/4X1/2X2B 2902936 PHOENIX CONTACT Single-channel or two-channel contact extension with ..

PSR-SPP-42-230UC/URM4/4X1/2X2B

2902936

PHOENIX_CONTACT

Available

Ship on today

Single-channel or two-channel contact extension with wide range input, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e according to EN ISO 13849 safe isolation, plug-in spring-cage terminal block, width 22.5 mm

More details


* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$147.54
2+$143.56
3+$141.59
4+$140.33
6+$138.99
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Product description

The URM4 contact extension device enables safety-related signals to be further processed as floating contacts for an input voltage range of 42 to 230 V AC/DC. The contact extension device specifically covers the operating range above a nominal voltage of 24 V.

The new device is approved in accordance with EN 50156 and can therefore be used in furnaces without any additional effort. In particular when used in conjunction with the corresponding PSR safety relay as a basic device, safety circuits up to PL e or SIL 3 can be implemented.

Dimensions

Width22.5 mm
Height112 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Shock15g
Vibration (operation)10 Hz ...150 Hz, 2g
Maximum altitude≤ 2000 m (Above sea level)

Input data

Power consumption at UStyp. 1.68 W ()
typ. 4.6 W (230 V AC)
Control supply voltage range42 V AC/DC ... 230 V AC/DC (Rated control circuit supply voltage US)
Rated control supply current IS40 mA ()
20 mA (230 V AC)
Input voltage range42 V AC/DC ... 230 V AC/DC
Typical pick-up time< 55 ms (when controlled via A1)
Typical release time< 20 ms (Control via A1 at 42 V DC)
< 20 ms (Control via A1 at 48 V DC)
< 20 ms (Control via A1 at 60 V DC)
< 20 ms (Control via A1 at 110 V AC)
< 20 ms (Control via A1 at 230 V AC)
Concurrence input 1/2
Recovery time< 1 s
Maximum switching frequency0.5 Hz

Output data

Contact type4 enabling current paths
1 confirmation current path
1 signaling current path
Contact materialAgSnO2
Minimum switching voltage15 V AC/DC
Maximum switching voltage250 V AC/DC
Limiting continuous current6 A (N/O contact)
6 A (N/C contact)
Inrush current, minimum25 mA
Maximum inrush current8 A
Sq. Total current36 A2 (see to derating)
Interrupting rating (ohmic load) max.144 W (24 V DC, τ = 0 ms)
288 W (48 V DC, τ = 0 ms)
180 W (60 V DC, τ = 0 ms)
77 W (110 V DC, τ = 0 ms)
88 W (220 V DC, τ = 0 ms)
1380 VA (250 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load)42 W (24 V DC, τ = 40 ms)
40 W (48 V DC, τ = 40 ms)
36 W (60 V DC, τ = 40 ms)
35 W (110 V DC, τ = 40 ms)
33 W (220 V DC, τ = 40 ms)
Switching capacity min.0.4 W
Output fuse10 A gL/gG (N/O contact)
6 A gL/gG (N/C contact)

General

Relay typeElectromechanical relay with forcibly guided contacts in accordance with EN 50205
Mechanical service life10 x 106 cycles
Net weight236.2 g
Mounting typeDIN rail mounting
Assembly instructionsSee derating curve
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Mounting positionvertical or horizontal
Controlone and two channel
Parameters as per EN ISO 138494 (In conjunction with suitable evaluating device)
Stop category0
Parameters for IEC 615083
Housing materialPBT

Connection data

Connection methodSpring-cage connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.16
Stripping length8 mm

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2902936-PSR-SPP-42-230UC/URM4/4X1/2X2BEnglish147 KbytesPHOENIX CONTACT-2902936-PSR-SPP-42-230UC/URM4/4X1/2X2B

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or