Product successfully added to your shopping cart
PACT RCP-4000A-1A-D190
2904923
PHOENIX_CONTACT
1
Current transformer
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2904923 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 236 (C-5-2017) |
GTIN | 4046356900935 |
Weight per Piece (excluding packing) | 455.400 g |
Custom tariff number | 85437090 |
Country of origin | DE (Germany) |
Nominal supply voltage | 24 V DC -20 % ... +25 % |
---|---|
Nominal supply voltage range | 19.2 V DC ... 30 V DC |
Max. current consumption | 190 mA |
Power consumption | 4 W |
Frequency measuring range | 40 Hz ... 20000 Hz |
---|---|
Position error | < 1 % |
Linearity error | 0.1 % |
Measuring ranges (current) | 100 A 250 A 400 A 630 A 1000 A 1500 A 2000 A 4000 A |
---|---|
Configurable/programmable | Via DIP switches |
Phase angle | < 1 ° |
Rated power | 1.5 VA |
Max. distances for copper cables at PN max | 32 m (0.75 mm² (AWG 20)) |
64 m (1.5 mm² (AWG 16)) | |
107 m (2.5 mm² (AWG 14)) |
Input signal (at 50 Hz) | 100 mV (1000 A) |
---|---|
Input impedance | 27 kΩ (smallest measuring range) |
Output signal (at 50 Hz) | 100 mV (no load, at 1,000 A) |
---|---|
Output voltage (in no-load operation) | VOUT= M * dI/dt |
Output voltage (sinusoidal, in no-load operation) | 100 mV (VOUT= 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A)) |
Length of measuring coil | 600 mm |
---|---|
Diameter of measuring coil | 8.3 mm ±0.2 mm |
Length of signal cable | 3000 mm |
Conductor structure signal line | 2x 0.22 mm (Signal (tinned)) |
1x 0.22 mm (Shielding (tinned)) | |
Coil material | Elastollan |
Housing material | PC |
Insulation | double insulation |
Rated insulation voltage | 1000 V AC (rms CAT III) |
600 V AC (rms CAT IV) | |
Test voltage | 10.45 kV (DC / 1 min.) |
Basic accuracy | |
UL, USA/Canada | UL 61010 Recognized |
Linearity error | < 0.5 % (From the range end value) |
---|---|
Maximum transmission error | ≤ 0.5 % (From the range end value) |
Frequency range | 45 Hz ... 65 Hz |
Max. detectable harmonics | < 2 kHz |
Current consumption | < 190 mA (at 19.2 V) |
Housing material | Polyamide |
Test voltage | 1.5 kV AC (Supply/input and output: 50 Hz, 1 min) |
Operating voltage display | Green LED |
UL, USA/Canada | UL 508 Listed |
Standards/regulations | IEC 61010-1 |
---|---|
IEC 61010-2-032 | |
Insulation | double insulation |
Degree of pollution | 2 |
Overvoltage category | III (1,000 V, to neutral conductor) |
IV (600 V, to neutral conductor) | |
Temperature coefficients | 0.005 %/K (+10°C ... +70°C; both components have the same ambient temperature) |
0.07 %/K (-20°C ... +10°C; both components have the same ambient temperature) | |
Typical measuring error | < 1 % |
Connection name | Measuring transducer side |
---|---|
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Screw thread | M3 |
Connection method | Screw connection |
Stripping length | 7 mm |
Torque | 0.5 Nm ... 0.6 Nm |
Ambient temperature (operation) | -30 °C ... 80 °C (Measuring coil) |
---|---|
-20 °C ... 70 °C (Measuring transducer) | |
Ambient temperature (storage/transport) | -40 °C ... 80 °C (Measuring coil) |
-25 °C ... 85 °C (Measuring transducer) | |
Maximum altitude | < 2000 m |
Measuring coil degree of protection | IP67 (not assessed by UL) |
Measuring transducer degree of protection | IP20 |
Standards/regulations | IEC 61010-1 |
---|---|
IEC 61010-2-032 | |
Insulation | double insulation |
Degree of pollution | 2 |
Overvoltage category | III (1,000 V, to neutral conductor) |
IV (600 V, to neutral conductor) |
REACh SVHC | Lead 7439-92-1 |
---|---|
China RoHS | Environmentally Friendly Use Period = 50 |
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2904923-PACT RCP-4000A-1A-D190 | 101 Kbytes |
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.