PSR-MC40-3NO-1DO-24DC-SC 2700569 PHOENIX CONTACT Safety relays View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSR-MC40-3NO-1DO-24DC-SC 2700569 PHOENIX CONTACT Safety relays

PSR-MC40-3NO-1DO-24DC-SC

2700569

PHOENIX_CONTACT

Safety relays

More details


Safety

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total price: $264.31
Unit price: $264.31

Quantity Price
1+$264.31
2+$228.82
3+$219.04
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Often bought together

More info



Key Commercial Data

Orderkey2700569
Packing unit1 pc
Catalog pagePage 255 (C-6-2017)
GTIN4046356912570
Weight per Piece (excluding packing)177.000 g
Custom tariff number85371098
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width12.5 mm
Height112.2 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Maximum altitude≤ 2000 m (Above sea level)

Power supply

Rated control circuit supply voltage US24 V DC -15 % / +10 %
20.4 V DC ... 26.4 V DC
Rated control supply current IStyp. 80 mA
Power consumption at UStyp. 1.92 W
Inrush current5 A (Δt = 200 µs at Us)
Filter time1 ms (at A1 in the event of voltage dips at Us)
Protective circuitSurge protection Suppressor diode
Protection against polarity reversal for rated control circuit supply voltage

Digital inputs

Input voltage range "0" signal0 V DC ... 5 V DC (for safe Off; at S12 and S22)
Input current range "0" signal0 mA ... 2 mA (for safe Off; at S12 and S22)
Inrush current< 20 mA (with Us/Ixto S12)
< 200 mA (with Us/Ixto S34)
< 5 mA (with Us/Ixto S22)
Current consumption< 5 mA (with Us/Ixto S12)
< 5 mA (with Us/Ixto S22)
> -5 mA (with Us/Ixto S34)
< 10 mA (with Us/Ixto S34)
Filter timemax. 1.5 ms (at S12, S22; test pulse width)
min. 7.5 ms (at S12, S22; test pulse rate)
Test pulse rate = 5 x Test pulse width
Voltage at input/start and feedback circuit24 V DC -15 % / +10 %
Max. permissible overall conductor resistance150 Ω

Relay outputs: enabling current path

Output nameEnabling current path
Output descriptionsafety-related N/O contacts
Number of outputs3 (undelayed)
Contact type3 enabling current paths
Contact materialAgSnO2
Switching voltagemin. 12 V AC/DC
max. 250 V AC/DC (Observe the load curve)
Limiting continuous current6 A (observe derating)
Inrush currentmin. 3 mA
max. 6 A
Sq. Total current48 A2(observe derating)
Switching capacitymin. 60 mW
Switching frequency0.5 Hz
Mechanical service life10x 106cycles
Output fuse6 A gL/gG (N/O contact)
4 A gL/gG (for low-demand applications)

Alarm outputs

Output descriptionnon-safety-related
Number of outputs1 (digital, PNP)
Voltage22 V DC (Us- 2 V)
Currentmax. 100 mA
Maximum inrush current500 mA (Δt = 1 ms at Us)
Short-circuit protectionno

Times

Typical pickup time at US< 250 ms (when controlled via A1)
Typical response time at US< 175 ms (automatic start)
< 175 ms (manual, monitored start)
Typical release time at US< 20 ms (when controlled via A1 or S12 and S22.)
Recovery time< 500 ms

General

Relay typeElectromechanical relay with forcibly guided contacts in accordance with IEC/EN 61810-3 (EN 50205)
Nominal operating mode100% operating factor
Net weight177 g
Mounting positionvertical or horizontal
Mounting typeDIN rail mounting
Assembly instructionsSee derating curve
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Housing materialPBT
Housing coloryellow
Operating voltage display1 x green LED
Status display3 x green LED

Connection data

Connection methodScrew connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3

Safety-related characteristic data

Stop category0
DesignationIEC 61508 - High demand
Safety Integrity Level (SIL)3
DesignationIEC 61508 - Low demand
Safety Integrity Level (SIL)3
DesignationEN ISO 13849
Performance level (PL)e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Category4
DesignationEN 62061
Safety Integrity Level Claim Limit (SIL CL)3

Standards and Regulations

DesignationAir clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178
Rated insulation voltage250 V AC
250 V AC
Rated surge voltage/insulationSafe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24) and enabling current path (33/34)
Basic insulation 4 kV between all current paths and housing
Degree of pollution2
Overvoltage categoryIII
Shock15g
Vibration (operation)10 Hz ... 150 Hz, 2g
ConformanceCE-compliant

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.