If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. The QUICKON T-distributor is designed for permanent installation.
light grey RAL 7035
Number of positions
Wrench size, union nut
Tightening torque, union nut
Tightening torque, counter nut
Number of connections
Conductor cross section flexible min.
Conductor cross section flexible max.
Conductor cross section AWG min.
Conductor cross section AWG max.
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
Class 2 to 5 / 0.25 mm
Wire insulation material
Wire diameter including insulation
2.4 mm ... 4.3 mm
External cable diameter
9 mm ... 16 mm (branch line)
9 mm ... 16 mm (Master cable (for diameters < 13.5 mm, additional insert seals are available))
Degree of protection
Ambient temperature (operation)
-40 °C ... 80 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Temperature when conductor connected
10 °C ... 50 °C (specifications of the cable manufacturer must also be observed)
Nominal current IN
32 A (At ambient temperature 40°C)
Rated voltage (III/3)
Rated voltage (III/2)
Rated voltage (II/2)
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Contact surface material
Pre-nickel plated and tin-plated
Flammability rating according to UL 94
PDF of QUICKON T-distributor, for T-shaped power branches with round cable - PHOENIX CONTACT - Q 4,0/5IDC/KU-T - 1641963