PT 5-HF-24DC-ST 2906002 PHOENIX CONTACT PT protective plug with HF protective circuit for 4 signal wires. No.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PT 5-HF-24DC-ST 2906002 PHOENIX CONTACT PT protective plug with HF protective circuit for 4 signal wires. No..

PT 5-HF-24DC-ST

2906002

PHOENIX_CONTACT

Available

Ship on today

PT protective plug with HF protective circuit for 4 signal wires. Nominal voltage: 24 V DC

More details


Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection for measurement and control technology - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$126.21
2+$122.65
4+$119.76
5+$118.95
7+$117.98
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Height45 mm
Width17.7 mm
Depth52 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 85 °C
Degree of protectionIP20

General

Housing materialPA 6.6
Flammability rating according to UL 94V0
Colorblack
TypeDIN rail module, two-section, divisible
Number of positions5
Direction of actionLine-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground

Protective circuit

IEC test classificationC1
C2
C3
D1
VDE requirement classC1
C2
C3
D1
Nominal voltage UN24 V DC
Maximum continuous voltage UC28 V DC
Nominal current IN450 mA (45°C)
Operating effective current IC at UC≤ 5 µA
Residual current IPE≤ 5 µA (with PT 2x2-BE)
≤ 1 µA (with PT 2x2+F-BE)
Nominal discharge current In (8/20) µs (Core-Core)10 kA
Nominal discharge current In (8/20) µs (Core-Earth)10 kA (with PT 2x2+F-BE)
10 kA (with PT 2x2-BE)
Total surge current (8/20) µs20 kA
Nominal pulse current Ian (10/1000) µs (Core-Core)25 A
Impulse discharge current (10/350)˽µs, peak value limp2.5 kA (with PT 2x2-BE)
2.5 kA (with PT 2x2+F-BE)
Voltage protection level Up (core-core)≤ 150 V (C1 - 1 kV/500 A)
≤ 165 V (C2 - 10 kV / 5 kA)
≤ 450 V (C2 - 10 kA)
≤ 50 V (C3 - 25 A)
Voltage protection level Up (core-ground)≤ 150 V (C1 - 1 kV/500 A)
≤ 700 V (C1 - 1 kV / 500 A; BE:+F)
≤ 165 V (C2 - 10 kV / 5 kA)
≤ 900 V (C2 - 10 kV / 5 kA; BE:+F)
≤ 450 V (C2 - 10 kA)
≤ 1000 V (C2 - 10 kA; BE:+F)
≤ 50 V (C3 - 25 A)
≤ 800 V (C3 - 25 A; BE:+F)
Voltage protection level Up (core-GND)≤ 150 V (C1 - 1 kV/500 A)
≤ 150 V (C1 - 1 kV / 500 A; BE:+F)
≤ 165 V (C2 - 10 kV / 5 kA)
≤ 165 V (C2 - 10 kV / 5 kA; BE:+F)
≤ 450 V (C2 - 10 kA)
≤ 450 V (C2 - 10 kA; BE:+F)
≤ 50 V (C3 - 25 A)
≤ 50 V (C3 - 25 A; BE:+F)
Response time tA (Core-Core)≤ 500 ns
Response time tA (Core-Earth)≤ 500 ns
Input attenuation aE, sym.typ. 0.3 dB (≤ 13 MHz / 100 Ω)
Cut-off frequency fg (3 dB), sym. in 100 Ohm systemtyp. 70 MHz
Capacity (Core-Core)typ. 23 pF
Resistance in series2.2 Ω ±10 % (1-2/5-6/7-8/11-12)
≤ 1 Ω (9-10)
Surge protection fault messageNone
Max. required back-up fuse500 mA (e.g. T in acc. with IEC 127-2/III)

Connection data

Connection methodScrew connection (in connection with the base element)
Connection type INPLUGTRAB plug-in system
Connection type OUTPLUGTRAB plug-in system
Screw threadM3
Tightening torque0.8 Nm
Stripping length8 mm
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12

Connection, equipotential bonding

Stripping length8 mm
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2906002-PT 5-HF-24DC-STEnglish117 KbytesPHOENIX CONTACT-2906002-PT 5-HF-24DC-ST

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or