STEP-PS/ 1AC/24DC/3.8/C2LPS 2868677 PHOENIX CONTACT Primary-switched STEP POWER power supply for DIN rail mo.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

STEP-PS/ 1AC/24DC/3.8/C2LPS 2868677 PHOENIX CONTACT Primary-switched STEP POWER power supply for DIN rail mo..

STEP-PS/ 1AC/24DC/3.8/C2LPS

2868677

PHOENIX_CONTACT

Available

Ship on today

Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/3.8 A

More details


Power Supplies

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Power. Power Supply - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$110.42
2+$107.20
4+$104.59
6+$103.30
8+$102.62
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Product description

STEP POWER power supplies for installation distributors

The STEP POWER power supply range was developed especially for building automation. The low idling losses and high degree of efficiency ensure maximum energy efficiency. They allow flexible use and can be snapped onto the DIN rail or screwed onto an even surface.

Dimensions

Width90 mm
Height90 mm
Depth61 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Noise immunityEN 61000-6-2:2005

Input data

Nominal input voltage range100 V AC ... 240 V AC
Input voltage range85 V AC ... 264 V AC
95 V DC ... 250 V DC
AC frequency range45 Hz ... 65 Hz
Inrush surge current< 15 A (typical)
Power failure bypass> 25 ms (120 V AC)
> 120 ms (230 V AC)
Input fuse4 A (slow-blow, internal)
Choice of suitable circuit breakers6 A ... 16 A (Characteristics B, C, D, K)
Type of protectionTransient surge protection
Protective circuit/componentVaristor

Output data

Nominal output voltage24 V DC ±1 %
Setting range of the output voltage22.5 V DC ... 25 V DC (> 24 V DC, constant capacity restricted)
Nominal output current3.8 A (-25°C ... 55°C)
Output current Imax6.5 A
Derating55 °C ... 70 °C (2.5%/K)
Connection in seriesNo
Control deviation< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple< 80 mVPP (20 MHz)
Output power91.2 W
Typical response time< 0.5 s
Peak switching voltages nominal load< 10 mVPP (20 MHz)
Maximum power dissipation in no-load condition< 0.7 W
Power loss nominal load max.11.8 W

General

Net weight0.33 kg
Efficiency> 88 % (for 230 V AC and nominal values)
Insulation voltage input/output4 kV AC (type test)
3.75 kV AC (routine test)
Protection classII (in closed control cabinet)
MTBF (IEC 61709, SN 29500)> 897000 h (40°C)
Mounting positionhorizontal DIN rail NS 35, EN 60715
Assembly instructionsAlignable: 0 mm horizontally, 30 mm vertically

Connection data, input

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length6.5 mm
Screw threadM3

Connection data, output

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length6.5 mm
Screw threadM3

Signaling

Output nameLED status indicator
Status display"DC OK" LED green
Note on status displayUOUT > 21.5 V: LED lights up

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2868677-STEP-PS/ 1AC/24DC/3.8/C2LPSEnglish127 KbytesPHOENIX CONTACT-2868677-STEP-PS/ 1AC/24DC/3.8/C2LPS

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or