FL SWITCH 1708 M12 POE 2701883 PHOENIX CONTACT PoE+ Ethernet switch, 8 Ethernet ports in M12 format, automat.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FL SWITCH 1708 M12 POE 2701883 PHOENIX CONTACT PoE+ Ethernet switch, 8 Ethernet ports in M12 format, automat..

FL SWITCH 1708 M12 POE

2701883

PHOENIX_CONTACT

Available

Ship on today

PoE+ Ethernet switch, 8 Ethernet ports in M12 format, automatic detection of the data transmission speed of 10/100/1000 Mbps, jumbo frames up to 9600 bytes, coupling of network segments with different transmission speeds, autocrossing function, degree of protection IP67

More details


Programmable Logic Controllers Plcs

AUTOMATION Industrial Automation - PHOENIX CONTACT

Ethernet networks. Switches, routers, and antennas - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Product description

The Gigabit Power over Ethernet switch, which is suitable for industrial applications, enables both energy and data to be transmitted via an Ethernet cable according to IEEE 802.3at/802.3af. Up to 30 W feed power per port is possible. The device is a compact switch in robust IP67 metal housing. It has eight 8-pos. M12 Ethernet connectors, which enable PoE/PoE+ devices to be supplied and operation with speeds of 10/100/1000 Mbps. As it supports jumbo frames up to 9720 bytes, the switch is ideal for networking cameras. A total power of 200 W is available for supplying up to eight PoE/PoE+ devices. The switch generates the required 54 V DC for Power over Ethernet according to IEEE 802.3at/802.3af from the 24 V module supply for the connected termination devices.

Dimensions

Width176 mm
Height112 mm
Depth100 mm

Ambient conditions

Degree of protectionIP65/IP66/IP67
Ambient temperature (operation)-40 °C ... 70 °C (non-condensing)
Ambient temperature (storage/transport)-40 °C ... 70 °C
Permissible humidity (operation)10 % ... 95 %
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)
Air pressure (operation)86 kPa ... 108 kPa (2000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (3500 m above sea level)

Interfaces

Interface 1Ethernet
No. of ports8 (M12 socket)
Connection methodM12 connector, 8-pos.
Note on connection methodX-coded
Transmission physicsTwisted pair connection
Transmission speed10/100/1000 MBit/s
Transmission length100 m (per segment)
Signal LEDsData receive, link status

Function

Basic functionsStore-and-forward switch, 10/100/1000 Mbps, auto negotiation, complies with standard IEEE 802.3, 4 priority classes according to IEEE 802.1p, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 9720 bytes
PROFINET IO conformance classConformance-Class A
Status and diagnostic indicatorsLEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and PoE Status), and PoE performance
Signal contact control voltage24 V DC (typical)
Signal contact control current100 mA (24 V DC)

Network expansion parameters

Cascading depthNetwork, linear, and star structure: any
Maximum conductor length (twisted pair)100 m

Supply voltage

Supply voltage24 V DC (M12 connector)
Residual ripple3.6 VPP
Supply voltage range18.7 V DC ... 30.5 V DC
Typical current consumption300 mA (at US = 24 V DC)
Max. current consumption12 A (Maximum, nominal load)

General

Mounting typeWall mounting
Type AXStand-alone
Net weight2300 g
Housing materialZinc die-cast, surface bronzed and nickel-plated
NoteNOTE: Meet noise immunity requirementsConnect FE using a mounting screw when mounting on a conductive surface. When mounting on a non-conductive surface, FE is connected using the mounting screw via a cable lug.

Mechanical tests

Type of testShock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result10g, 16 ms, 1000 shocks, in all space directions
Type of testShock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result30g, half-sine shock pulse

Conformity with EMC directives

Test standardEN 61000-4-2 (ESD)
Test resultCriterion A
Test standardEN 61000-4-3 (electromagnetic fields)
Test resultCriterion A
Test standardEN 61000-4-6 (line noise immunity)
Test resultCriterion A
Test standardEN 61000-4-4
Test resultCriterion A
Test standardEN 61000-4-5 (surge)
Test resultCriterion A
Test standardEN 60950-1

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2701883-FL SWITCH 1708 M12 POEEnglish104 KbytesPHOENIX CONTACT-2701883-FL SWITCH 1708 M12 POE

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or