REL-IR4/LDP- 12DC/4X21AU 2903669 PHOENIX CONTACT Single relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

REL-IR4/LDP- 12DC/4X21AU 2903669 PHOENIX CONTACT Single relay

REL-IR4/LDP- 12DC/4X21AU

2903669

PHOENIX_CONTACT

10

Single relay

More details


Industrial Relays

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
10+$9.08
30+$7.91
50+$7.38
70+$7.12
100+$6.96
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Often bought together

More info



Key Commercial Data

Orderkey2903669
Packing unit10 pc
Minimum order quantity10 pc
Catalog pagePage 314 (C-5-2017)
GTIN4046356758826
Weight per Piece (excluding packing)34.300 g
Custom tariff number85364190
Country of originPL (Poland)

Dimensions

Width21.2 mm
Height27.5 mm
Depth35.6 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN12 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN78 mA
Typical response time13 ms
Typical release time14 ms
Protective circuitDamping diode
Status displayYellow LED
Power dissipation for nominal condition0.94 W

Contact side

Contact type4 PDTs
Type of switch contactSingle contact
Contact materialAgNi, hard gold-plated
NoteIf the specified maximum values for multi-layer contact relays are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage2 V (At 24 mA)
Min. switching current2 mA (24 V DC)
Maximum inrush current50 mA
Limiting continuous current50 mA
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Switching capacity min.48 mW
Motor load according to UL 5081/3 HP, 240 V AC

Contact side (with destroyed gold layer)

Contact materialAgNi
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (At 24 mA)
Limiting continuous current6 A
Maximum inrush current16 A (20 ms, N/O contact)
Min. switching current5 mA (at 24 V)
Interrupting rating (ohmic load) max.144 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.22 A (at 120 V, DC13)
0.11 A (at 250 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)

General

Test voltage relay winding/relay contact2.5 kVrms(50 Hz, 1 min.)
Test voltage PDT/PDT2 kVrms(50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT I
Mechanical service lifeapprox. 2x 107cycles
Service life, electricalsee diagram
Mounting positionany
Net weight (SAP)34.3 g

Standards and Regulations

Connection in acc. with standardCSA
Standards/regulationsIEC 60664
IEC 61810
Rated insulation voltage250 V AC
Rated surge voltage2.5 kV
InsulationBasic insulation
Degree of pollution2
Overvoltage categoryII

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.