PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal blo - PHOENIX CONTACT - PLC-RSC-230UC/21-21AU - 2967141 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal blo - PHOENIX CONTACT - PLC-RSC-230UC/21-21AU - 2967141






Ship on today

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 230 V AC/220 V DC

More details


INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Cabling and interface cabling systems. Cabling - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

Price: $19.14
*This price is per unit and is the net value (not including taxes if applicable).
Up to 35% discount for registered clients.

Request a quote
How it Works

How does the quotation request work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with our price proposals
4 You can directly process the order for the quotation

There are several options for payment
- Credit card
- Wire Transfer
- PayPal

More info


Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN230 V AC (220 V DC)
220 V DC
Typical input current at UN4.5 mA (at UN = 230 V AC)
4.3 mA (at UN = 220 V DC)
Typical response time7 ms
Typical release time10 ms
Protective circuitBridge rectifier Bridge rectifier
Operating voltage displayYellow LED
Power dissipation for nominal condition1.04 W

Contact side

Contact type2 PDT
Contact materialAgNi, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage100 mV (at 10 mA)
Min. switching current1 mA (at 24 V)
Maximum inrush current50 mA
Limiting continuous current50 mA
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V AC/DC
Limiting continuous current6 A
Maximum inrush current15 A (300 ms)
Min. switching current10 mA
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)


Test voltage relay winding/relay contact4 kV AC (50 Hz, 1 min.)
Test voltage PDT/PDT2.5 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT III (Relay)
Mechanical service life3 x 107 cycles
Flammability rating according to UL 94V0
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation6 kV/Basic isolation
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14

PDF of PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal blo - PHOENIX CONTACT - PLC-RSC-230UC/21-21AU - 2967141

PHOENIX CONTACT-2967141-PLC-RSC-230UC/21-21AUEnglish104 KbytesPHOENIX CONTACT-2967141-PLC-RSC-230UC/21-21AU

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait

* Required fields