EMD-FL-PF-400 2885809 PHOENIX CONTACT Monitoring relay for load monitoring (cos ϕ 0,1 ... 1) in 1- and 3-p.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EMD-FL-PF-400 2885809 PHOENIX CONTACT Monitoring relay for load monitoring (cos ϕ 0,1 ... 1) in 1- and 3-p..

EMD-FL-PF-400

2885809

PHOENIX_CONTACT

Available

Ship on today

Monitoring relay for load monitoring (cos ϕ = 0,1 ... 1) in 1- and 3-phase networks, underload, overload, window, error memory, wide-range power supply unit, 2 PDTs

More details


Programmable Logic Controllers Plcs

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$238.22
2+$232.58
3+$229.79
4+$228.99
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Product description

Increasingly higher demands are being placed on safety and system availability – across all sectors. Processes are becoming more and more complex, not only in mechanical engineering and the chemical industry, but also in plant and automation technology. Demands on power engineering are also increasing constantly.

Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. Electronic monitoring relays in the EMD series are available for a wide range of monitoring tasks to avoid the consequences of errors or to keep them within limits.

The operating states are indicated using colored LEDs, errors that may occur can be sent to a control system via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range.

Dimensions

Width22.5 mm
Height90 mm
Depth113 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport)-25 °C ... 70 °C

Input data

Nominal input voltage UN3 N ~ 415/240 V
Input voltage range40 V AC ... 415 V AC (1(N) ~, single-phase load)
40 V AC ... 415 V AC (3(N) ~, 3-phase load)
Input current range0.5 A ... 10 A (Connection terminal blocks: L1i and L1k)
Overload capacity12 A permanent
Maximum temperature coefficient≤ 0.1 %/K
FunctionUnderload, overload, Window
Setting range for response delay0.1 s ... 40 s
Setting range for starting delay1 s ... 100 s
Basic accuracy± 5 % (At cos φ = 0.8)
Setting accuracy≤ 5 % (At cos φ = 0.8)
Repeat accuracy± 1.8 %
Recovery time500 ms

Contact side

Contact type2 floating PDT contacts
Maximum switching voltage250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse5 A (fast-blow)

Power supply

Supply voltage range24 V AC ... 240 V AC -15 % ... +10 %
24 V DC ... 240 V DC (-20 %...+25 %)

General

Mechanical service lifeApprox. 2 x 107 cycles
Operating mode100% operating factor
Mounting positionany
Assembly instructionson standard DIN rail NS 35 in accordance with EN 60715
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Overvoltage categoryIII, basic insulation (as per EN 50178)
Housing insulation materialPolyamide PA, self-extinguishing
Colorgreen
Rated insulation voltage300 V (According to EN 50178)
ConformanceCE-compliant
UL, USA / CanadaUL/C-UL listed UL 508

Connection data

Conductor cross section flexible min.0.25 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section solid min.0.5 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.20
Conductor cross section AWG max.14
Stripping length8 mm
Connection methodScrew connection

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2885809-EMD-FL-PF-400English117 KbytesPHOENIX CONTACT-2885809-EMD-FL-PF-400

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or