Product successfully added to your shopping cart
REL-MR-120AC/21HC AU
2961516
PHOENIX_CONTACT
10
Single relay
Industrial Relays
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2961516 |
---|---|
Packing unit | 10 pc |
Minimum order quantity | 10 pc |
Note | Made to Order (non-returnable) |
Catalog page | Page 304 (C-5-2017) |
GTIN | 4017918937911 |
Weight per Piece (excluding packing) | 14.950 g |
Custom tariff number | 85364900 |
Country of origin | AT (Austria) |
Ambient temperature (operation) | -40 °C ... 85 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Nominal input voltage UN | 120 V AC |
---|---|
Mains frequency | 50/60 Hz |
Typical input current at UN | 7 mA (at 50 Hz) |
5 mA (At 60 Hz) | |
Typical response time | 3 ms ... 12 ms (depending on phase relation) |
Typical release time range | 2 ms ... 9 ms (depending on phase relation) |
Coil resistance | 8100 Ω ±15 % (at 20 °C) |
Power dissipation for nominal condition | 0.84 W |
Contact type | 1 PDT |
---|---|
Type of switch contact | Single contact |
Contact material | AgNi, hard gold-plated |
Maximum switching voltage | 30 V AC |
36 V DC | |
Minimum switching voltage | 100 mV (at 10 mA) |
Min. switching current | 1 mA (at 24 V) |
Maximum inrush current | 50 mA |
Limiting continuous current | 50 mA |
Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
Switching capacity | 2 A (at 24 V, AC15) |
Contact material | AgNi |
---|---|
Note | the following values are applicable if a gold layer is destroyed |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 12 V (at 10 mA) |
Limiting continuous current | 16 A |
Maximum inrush current | 50 A (20 ms) |
Min. switching current | 10 mA (at 12 V) |
Interrupting rating (ohmic load) max. | 384 W (at 24 V DC) |
58 W (at 48 V DC) | |
48 W (at 60 V DC) | |
50 W (at 110 V DC) | |
80 W (at 220 V DC) | |
4000 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.2 A (at 250 V, DC13) | |
2 A (at 24 V, AC15) | |
2 A (at 120 V, AC15) | |
2 A (at 250 V, AC15) |
Test voltage relay winding/relay contact | 5 kV AC (50 Hz, 1 min.) |
---|---|
Operating mode | 100% operating factor |
Mechanical service life | 1x 107cycles |
Service life, electrical | see diagram |
Mounting position | any |
Assembly instructions | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
Net weight (SAP) | 14.95 g |
Connection in acc. with standard | CUL |
---|---|
Standards/regulations | IEC 60664 |
EN 50178 | |
EN 61810-1 | |
Degree of pollution | 3 |
Overvoltage category | III |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2961516-REL-MR-120AC/21HC AU | 174 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.