For HEAVYCON ADVANCE housing of B24 type and HEAVYCON housing of B24/B48 type, crimp contacts CK 2,5-ED (crimp contacts not included in the scope of supply).
Constructional and testing regulations
DIN EN 61984
DIN EN 60664
Number of positions
Connection in acc. with standard
IEC / EN
Conductor cross section
0.5 mm² ... 4 mm²
Connection cross section AWG
20 ... 12
Stripping length of the individual wire
Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HC-B10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles.
For housing type B24. Connectors may only be inserted when there is no load/the power is switched off. Use a screwdriver to remove the crimp contacts. The opening for the screwdriver is next to the opening where the conductor is inserted.
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Degree of protection
Flammability rating according to UL 94
Contact surface material
Ag (alternatively Au)
Contact carrier material
PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2)
PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)