With the QUICKON connection method, the wires are connected with a simple levering action of the screwdriver. The wire does not need to be stripped before connection! This saves at least 60% connection time!
For HEAVYCON ADVANCE and HEAVYCON housing of B6 type. Coding using the CP-HC (1686478) coding profile. HC-B6.../ HC-B10... for two coding profiles. HC-B16.../ HC-B24... for 4 coding profiles. Connectors may be operated only when there is no load/voltage.
Number of positions
Conductor cross section
0.34 mm² ... 2.5 mm²
Connection cross section AWG
22 ... 14
Wire diameter including insulation
1 mm ... 3.5 mm
Frequency of connections between conductors of the same cross section
If the conductor is to be reconnected, it must be cut off above the last contact point.
For HEAVYCON-ADVANCE and HEAVYCON housing of type B6. Encoding using coding profile CP-HC (1686478). HC-B6... / HC-B10... for two coding profiles. HC-B16... / HC-B24...for four coding profiles. Connectors may only be actuated when there is no load/voltage.
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Ambient temperature (assembly)
-25 °C ... 50 °C
Flammability rating according to UL 94
Contact surface material
Contact carrier material
Material wire insulation
PVC / PE
PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2)
PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Rated voltage (III/3)
Rated surge voltage
PDF of HEAVYCON female housing, B6 series, 6-pos., QUICKON connection - PHOENIX CONTACT - HC-B 6-EBUQ-2,5 - 1605556