PSI-MOS-RS485W2/FO 660 E 2708313 PHOENIX CONTACT FO converter with integrated optical diagnosis, alarm conta.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSI-MOS-RS485W2/FO 660 E 2708313 PHOENIX CONTACT FO converter with integrated optical diagnosis, alarm conta..

PSI-MOS-RS485W2/FO 660 E

2708313

PHOENIX_CONTACT

Available

Ship on today

FO converter with integrated optical diagnosis, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal equipment with an FO interface (FSMA), 660 nm, for polymer/HCS fiber cable

More details


Converters

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Interface converter, separators and modems. Serial - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$570.01
2+$564.73
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Width35 mm
Height99 mm
Depth105 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)30 % ... 95 % (non-condensing)
Altitude5000 m (For restrictions see manufacturer's declaration)
Degree of protectionIP20
Noise immunityEN 61000-6-2:2005

General

Bit delay≤ 1 Bit
Bit distortion, input± 35 % (permitted)
Bit distortion, output< 6.25 %
Electrical isolationVCC // RS-485
Test voltage data interface/power supply1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC (valid until 19.04.2016) / 2014/30/EU (valid from 20.04.2016)
Noise emissionEN 55011
Net weight186.98 g
Housing materialPA 6.6-FR
Colorgreen
MTBF358 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
73 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
ConformanceCE-compliant
ATEXEx II 3 G Ex nAC IIC T4 X (Please follow the special installation instructions in the documentation!)
Ex II (2) GD [Ex op is] IIC (PTB 06 ATEX 2042 U) (Please follow the special installation instructions in the documentation!)
UL, USA / CanadaClass I, Zone 2, AEx nc IIC T5
Class I, zone 2, Ex nC nL IIC T5 X
Class I, Div. 2, Groups A, B, C, D

Power supply

Nominal supply voltage24 V DC (With UL approval)
Supply voltage range18 V DC ... 30 V DC
Max. current consumption130 mA
Typical current consumption100 mA (24 V DC)
Connection methodCOMBICON plug-in screw terminal block

Serial interface

Interface 1RS-485 interface, 2-wire
Operating modeSemi-duplex
Connection methodPluggable screw connection
File format/codingUART (11/10 bit switchable; NRZ), slip-tolerant
Data direction switchingAutomatic control
Transmission mediumCopper
Transmission length≤ 1200 m (depending on the data rate, with shielded, twisted data cable)
Termination resistor390 Ω
220 Ω
390 Ω (Can be connected)
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.14
Serial transmission speed4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps

Optical interface FO

Transmit capacity, minimum-4.6 dBm (980/1000 µm)
-16 dBm (200/230 µm)
Minimum receiver sensitivity-30.2 dBm
Overrange receiver-3 dBm (980/1000 µm)
Wavelength660 nm
Transmission length incl. 3 dB system reserve100 m (With F-P 980/1000 230 dB/km with quick mounting connector)
800 m (With F-K 200/230 10 dB/km with quick mounting connector)
Transmission mediumPolymer fiber
PCF fiber
Transmission protocolProtocol-transparent to the RS-485 interface
Connection methodF-SMA

Digital outputs

Output nameRelay output
Output descriptionAlarm output
Number of outputs1
Maximum switching voltage60 V DC
42 V AC
Limiting continuous current0.46 A

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2708313-PSI-MOS-RS485W2/FO 660 EEnglish408 KbytesPHOENIX CONTACT-2708313-PSI-MOS-RS485W2/FO 660 E

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or