Product successfully added to your shopping cart
MACX MCR-EX-SL-NAM-NAM
2866006
PHOENIX_CONTACT
1
Signal isolator
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2866006 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 157 (C-5-2017) |
GTIN | 4046356667876 |
Weight per Piece (excluding packing) | 100.000 g |
Custom tariff number | 85437090 |
Country of origin | DE (Germany) |
Ambient temperature (operation) | -20 °C ... 60 °C (Any mounting position) |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Maximum altitude | ≤ 2000 m |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Noise immunity | EN 61000-6-2 |
Non-load voltage | 8 V DC ±10 % |
---|---|
Switching points (attenuated) | < 1.2 mA (blocking) |
Switching points (unattenuated) | > 2.1 mA (conductive) |
Signal input | Intrinsically safe |
Available input sources | NAMUR proximity sensors (EN 60947-5-6) |
Switching hysteresis | < 0.2 mA |
Line fault detection | Break 0.05 mA < IIN < 0.35 mA |
Short circuit 100 Ω < RSensor < 360 Ω |
Nominal supply voltage | 24 V DC |
---|---|
Supply voltage range | 9.6 V DC ... 30 V DC (12 V DC ... 24 V DC (-20 % ... +25 %)) |
Power dissipation | < 0.6 W |
Power consumption | < 600 mW |
Conductor cross section solid min. | 0.2 mm² |
---|---|
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 7 mm |
Screw thread | M3 |
Connection method | Screw connection |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
No. of channels | 1 |
---|---|
Status display | Green LED (supply voltage) |
LED yellow (switching state) | |
Red LED (line errors) | |
Flammability rating according to UL 94 | V0 |
Degree of pollution | 2 |
Overvoltage category | II |
Electromagnetic compatibility | Conformance with EMC directive |
Interference emission | EN 61000-6-4 |
Housing material | PA 6.6-FR |
Color | gray |
Designation | Input/output |
Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Designation | Input/output/supply, DIN rail connector |
Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
2.5 kV (50 Hz, 1 min., test voltage) | |
Designation | Input/supply, DIN rail connector |
Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Conformance | CE-compliant, additionally EN 61326 |
ATEX | II (1) G [Ex ia Ga] IIC |
II (1) D [Ex ia Da] IIIC | |
II 3G Ex nA IIC T4 Gc X | |
IECEx | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA IIC T4 Gc | |
UL, USA/Canada | UL 61010 Listed |
SIL | 2 |
Max. internal inductance Li | negligible |
---|---|
Max. internal capacitance Ci | negligible |
Max. output voltage Uo | 9.6 V |
Max. output current Io | 10 mA |
Max. output power Po | 25 mW |
Group | IIC |
Max. external inductivity Lo | 100 mH |
Max. external capacity Co | 3.6 µF |
Group | IIB/IIIC |
Max. external inductivity Lo | 100 mH |
Max. external capacity Co | 26 µF |
Group | IIA |
Max. external inductivity Lo | 1000 mH |
Max. external capacity Co | 210 µF |
Safety-related maximum voltage Um | 253 V AC/DC |
Electromagnetic compatibility | Conformance with EMC directive |
---|---|
Noise emission | EN 61000-6-4 |
Flammability rating according to UL 94 | V0 |
Conformance | CE-compliant, additionally EN 61326 |
ATEX | II (1) G [Ex ia Ga] IIC |
II (1) D [Ex ia Da] IIIC | |
II 3G Ex nA IIC T4 Gc X | |
IECEx | [Ex ia Ga] IIC |
[Ex ia Da] IIIC | |
Ex nA IIC T4 Gc | |
UL, USA/Canada | UL 61010 Listed |
DNV GL-Temperature | B |
DNV GL-Humidity | B |
DNV GL-Vibration | A |
DNV GL-EMC | A |
DNV GL-Enclosure | Required protection according to the Rules shall be provided upon installation on board |
Group | IIC |
IIB/IIIC | |
IIA |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2866006-MACX MCR-EX-SL-NAM-NAM | 131 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.