PSI-MODEM-SHDSL/ETH 2313643 PHOENIX CONTACT Industrial Ethernet extender, for point-to-point connections, li.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSI-MODEM-SHDSL/ETH 2313643 PHOENIX CONTACT Industrial Ethernet extender, for point-to-point connections, li..

PSI-MODEM-SHDSL/ETH

2313643

PHOENIX_CONTACT

Available

Ship on today

Industrial Ethernet extender, for point-to-point connections, line and ring structures. Data rates of up to 30 Mbps, distances of up to 20 km on in-house copper cables, integrated diagnostic function, two configurable alarm outputs.

More details


Converters

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Interface converter, separators and modems. Serial - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Width35 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C (Freestanding (40 mm spacing to the right and left), no supply of other modules via the device)
-20 °C ... 55 °C (Mounted in rows with zero spacing and low power dissipation of aligned modules)
-20 °C ... 50 °C (Mounted in rows with zero spacing)
-20 °C ... 45 °C (Mounted in rows with zero spacing and supply of other modules via the device)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)
Altitude5000 m (For restrictions see manufacturer's declaration)
Degree of protectionIP20

General

Electrical isolationDIN EN 50178 (VCC // Ethernet // DSL (A) // DSL (B) // FE)
Test voltage data interface/power supply1.5 kVrms (50 Hz, 1 min.)
Standards/regulationsEN 50121-4
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC (valid until 19.04.2016) / 2014/30/EU (valid from 20.04.2016)
Net weight258.7 g
Housing materialPA 6.6-FR
Colorgreen
MTBF1017 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
205 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
MTTF711 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day))
308 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
125 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day))
ConformanceCE-compliant
ATEXEx II 3 G Ex nA IIC T4 Gc X (Please follow the special installation instructions in the documentation!)
UL, USA / CanadacULus listed UL 508

Power supply

Nominal supply voltage24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply)
5 V DC (configuration only, via mini-USB type B)
Supply voltage range18 V DC ... 30 V DC
Typical current consumption< 180 mA (24 V DC)
Connection methodCOMBICON plug-in screw terminal block

Serial interface

Interface 1Ethernet interface, 10/100BASE-T(X) in acc. with IEEE 802.3u
InterfaceEthernet
Connection methodRJ45 socket, shielded
Transmission length< 100 m (shielded twisted pair)
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.13
Protocols supportedTransparent protocol for IPv4 and IPv6
Serial transmission speed10/100 Mbps, auto negotiation
Interface 2SHDSL interface according to ITU-T G.991.2.bis
Connection method2 x 2-pos. COMBICON plug-in screw terminal blocks
Transmission length< 20 km (Depending on data rate and cable cross section)
Serial transmission speed4-wire operation: 64 kbps ... 30 Mbps
2-wire operation: 32 kbps ... 15.3 Mbps
Interface 3USB 2.0
Connection methodMini-USB type B, 5-pos.
Transmission length< 5 m (only for configuration and diagnostics)

Function

ManagementPlug and play, user-friendly software: Diagnostic functions, log book, individual configuration
Status and diagnostic indicatorsLEDs: VCC (supply voltage), ACT/LINK (Ethernet data traffic), ERR (errors)2 x LINK / 2 x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages)

Digital outputs

Output nameDigital output
Number of outputs2
Voltage output signaldepending on the operating voltage
Current output signal≤ 150 mA (Short-circuit-proof)
Behavior of the outputsDeactivated for device supply via T-BUS

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2313643-PSI-MODEM-SHDSL/ETHEnglish402 KbytesPHOENIX CONTACT-2313643-PSI-MODEM-SHDSL/ETH

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or