Product successfully added to your shopping cart
QUINT-BUFFER/24DC/20
2866213
PHOENIX_CONTACT
1
Buffer module
Power Supplies (PS)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2866213 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 586 (IF-2009) |
GTIN | 4017918959739 |
Weight per Piece (excluding packing) | 1,000.000 g |
Custom tariff number | 85049091 |
Country of origin | CN (China) |
Width | 64 mm |
---|---|
Height | 130 mm |
Depth | 125 mm |
Width with alternative assembly | 122 mm |
Height with alternative assembly | 130 mm |
Depth with alternative assembly | 67 mm |
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -25 °C ... 70 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Nominal input voltage | 24 V DC |
---|---|
Input voltage range | 22.5 V DC ... 30 V DC |
Current consumption | approx. 0.1 A |
0.6 A (charging process) | |
20.6 A (max.) | |
Current consumption (maximum) | 20.6 A (max.) |
Current consumption (idle) | approx. 0.1 A |
Current consumption (charging process) | 0.6 A (charging process) |
Buffer period | 0.2 s (20 A) |
4 s (1 A) | |
Type of protection | Transient surge protection |
Protective circuit/component | Suppressor diode, 35 V DC |
Nominal output voltage | 24 V DC (depending on the input voltage) |
---|---|
Setting range of the output voltage (USet) | 22 V DC ... 28.5 V DC |
Nominal output current (IN) | 20 A |
Connection in parallel | Yes, for increasing the buffer time and for redundancy |
Connection in series | yes |
Feedback resistance | < 35 V DC (buffer mode) |
Output overvoltage protection | < 35 V DC |
Residual ripple | < 100 mVPP(buffer mode) |
Output power | 480 W |
Peak switching voltages nominal load | < 100 mVPP(20 MHz) |
Type of protection | Transient surge protection |
Protective circuit/component | Suppressor diode, 35 V DC |
IQ technology | no |
---|---|
Net weight | 1 kg |
Memory medium | Internal, capacity |
Operating voltage display | Green LED |
Efficiency | > 95 % |
Insulation voltage input/output | 1 kV (routine test) |
1 kV (type test) | |
Protection class | III |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | > 500000 h |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |
Connection method | Screw connection |
---|---|
Conductor cross section solid min. | 0.5 mm² |
Conductor cross section solid max. | 16 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 10 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 6 |
Stripping length | 10 mm |
Screw thread | M4 |
Connection method | Screw connection |
---|---|
Conductor cross section solid min. | 0.5 mm² |
Conductor cross section solid max. | 16 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 10 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 6 |
Stripping length | 10 mm |
Screw thread | M4 |
Output name | Active (high = buffer module is loaded) |
---|---|
Output description | Power Good |
Maximum switching voltage | ≤ 24 V |
Output voltage | + 24 V |
Continuous load current | ≤ 20 mA |
Status display | LED "Power Good", green |
Note on status display | Buffer module is loaded: LED ON |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Screw thread | M3 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
---|---|
Noise emission | EN 55011 (EN 55022) |
Noise immunity | EN 61000-6-2:2005 |
Connection in acc. with standard | CUL |
Standards/regulations | EN 61000-4-2 |
Contact discharge | 8 kV |
Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 1 GHz |
Test field strength | 10 V/m |
Standards/regulations | EN 61000-4-4 |
Comments | Criterion B |
Standards/regulations | EN 61000-6-3 |
EN 61000-4-6 | |
Frequency range | 0.15 MHz ... 80 MHz |
Voltage | 10 V |
Standards/regulations | EN 61000-4-11 |
Low Voltage Directive | Conformance with LV directive 2006/95/EC |
Standard - Safety of transformers | EN 61558-2-17 |
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage | EN 60950-1 (SELV) and EN 60204 (PELV) |
Standard - Safe isolation | DIN VDE 0106-101 |
Shipbuilding approval | DNV GL (EMC A), ABS |
UL approvals | UL/C-UL listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D | |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. |
China RoHS | Environmentally Friendly Use Period = 25; |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PROTECTION EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2866213-QUINT-BUFFER/24DC/20 | 137 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.