MACX MCR-EX-SL-2NAM-R-UP-SP 2924249 PHOENIX CONTACT 2-channel Ex-i NAMUR isolation amplifier with wide-range.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

MACX MCR-EX-SL-2NAM-R-UP-SP 2924249 PHOENIX CONTACT 2-channel Ex-i NAMUR isolation amplifier with wide-range..

MACX MCR-EX-SL-2NAM-R-UP-SP

2924249

PHOENIX_CONTACT

Available

Ship on today

2-channel Ex-i NAMUR isolation amplifier with wide-range power supply for proximity sensors and switches. Every channel has a relay with PDT contact as a signal output. Line fault detection (LFD), 3-way isolation, SIL 2.

More details


Programmable Logic Controllers Plcs

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$161.81
2+$157.57
3+$155.46
4+$154.12
6+$153.11
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Width17.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Maximum altitude≤ 2000 m
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Noise immunityEN 61000-6-2
Degree of protectionIP20

Input data

Non-load voltage~ 8 V DC
Switching points (attenuated)< 1.2 mA (blocking)
Switching points (unattenuated)> 2.1 mA (conductive)

Output data

Switching outputRelay output
Contact type1 PDT per channel
Contact materialAgSnO2, hard gold-plated
Maximum switching voltage250 V AC (2 A, 60 Hz)
120 V DC (0.2 A)
30 V DC (2 A)
Maximum switching capacity500 VA
Mechanical service life107 cycles

Power supply

Supply voltage range24 V ... 230 V AC/DC (-20 % ... +10 %, 50 Hz ... 60 Hz)
Max. current consumption< 80 mA
Power consumption≤ 1.3 W
< 1.9 W

Connection data

Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.16
Stripping length8 mm
Connection methodPush-in connection

General

No. of channels2
Step response (10-90%)typ. 6 ms (N/O contact: OFF/ON)
typ. 6 ms (N/O contact: ON/OFF)
typ. 4 ms (N/C contact: ON/OFF)
typ. 10 ms (N/C contact: OFF/ON)
Status displayGreen LED (supply voltage, PWR)
LED yellow (switching state)
Red LED (line errors)
Flammability rating according to UL 94V0
Pollution degree2
Overvoltage categoryIII
Housing materialPA 66-FR
Colorgreen
DesignationInput/output
Electrical isolation375 V (Peak value in accordance with EN 60079-11)
DesignationInput/power supply
Electrical isolation375 V (Peak value in accordance with EN 60079-11)
300 Vrms (Rated insulation voltage (overvoltage category II; pollution degree 2, safe isolation as per EN 61010-1))
2.5 kV AC (50 Hz, 1 min., test voltage)
DesignationOutput 1/output 2/input, power supply
Electrical isolation300 Vrms (Rated insulation voltage (overvoltage category III; pollution degree 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
ConformanceCE-compliant, additionally EN 61326
ATEXEx II (1) G [Ex ia Ga] IIC
Ex II (1) D [Ex ia Da] IIIC
Ex II 3(1) G Ex nA nC [ia Ga] IIC T4 Gc X
IECEx[Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex nA nC [ia Ga] IIC T4 Gc
UL, USA / CanadaClass I Div 2; IS for Class I, II, III Div 1
Functional Safety (SIL)SIL 2

Safety data

Max. output voltage Uo9.56 V
Max. output current Io10.3 mA
Max. output power Po25 mW
GroupIIC
Max. external inductivity Lo300 mH
Max. external capacity Co3.6 µF
GroupIIB/IIIC
Max. external inductivity Lo1000 mH
Max. external capacity Co26 µF
Safety-related maximum voltage Um253 V AC/DC (Supply terminals)

EMC data

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Evaluation criterionA
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Evaluation criterionA
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Evaluation criterionA

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2924249-MACX MCR-EX-SL-2NAM-R-UP-SPEnglish185 KbytesPHOENIX CONTACT-2924249-MACX MCR-EX-SL-2NAM-R-UP-SP

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or