Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
NA1PK5PN NA1-PK5-PN PANASONIC Area sensor, 0.1 to 1.2 m, 25 mm pitch, bright indic.., PNP,12-24V
NA1PK5PN
NA1-PK5-PN
PANASONIC
Area sensor, 0.1 to 1.2 m, 25 mm pitch, bright indic.., PNP,12-24V
Area photoelectric sensor - PANASONIC > NA1 "picking" cross-beam - PANASONIC
* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
More info
▲| Product Number | NA1-PK5-PN |
| Part Number | NA1-PK5-PN |
| Product | Ultra-slim Body Picking Sensor |
| Details | PNP output [Standard type] |
| Product name | Ultra-slim Body Picking Sensor NA1-PK5/NA1-5 |
| Item | Specifications |
|---|---|
| Product Number | NA1-PK5-PN |
| Part Number | NA1-PK5-PN |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Sensing height | 100 mm3.937 in |
| Sensing range | 0.1 to 1.2 m0.328 to 3.937 ft (0.05 to 0.5 m0.164 to 1.640 ftwhen set to SHORT) (Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Beam pitch | 25 mm0.984 in |
| Number of beam channels | 5 beam channels |
| Sensing object | ø35 mmø1.378 inor more opaque object (completely beam interrupted object) |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Power consumption | Emitter: 0.6 W or less Receiver: 0.9 W or less (Note) Obtain the current consumption by the following equation. Current consumption = Power consumption / Supply voltage (e.g.) When the supply voltage is 12 V, the current consumption of the emitter is 0.5 W / 12 V ≈ 0.042 A = 42 mA |
| Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Output:Utilization category | DC-12 or DC-13 |
| Output:Output operation | ON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch |
| Output:Short-circuit protection | Incorporated |
| Response time | 10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less) |
| Indicators:Emitter | Power indicator: Green LED (lights up when the power is ON) Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) |
| Indicators:Receiver | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) |
| Interference prevention function | Incorporated |
| Pollution degree | 3 (Industrial environment) |
| Protection | IP62 (IEC) |
| Ambient temperature | -10 to +55 ℃+14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (Peak emission wavelength: 950 nm0.037 mil, synchronized scanning system) |
| Material | Enclosure: Heat-resistant ABS Lens cover: Acrylic Indicator cover: Acrylic |
| Cable | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Cable extension | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Weight | Net weight: Emitter 80 g approx., Receiver 85 g approx. Gross weight: 270 g approx. |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| Datasheet 1: NA1PK5PN - NA1PK5PN | NA1-PK5-PN | 427 Kbytes |
 |
| Download general catalog |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.