EX-Z12A-R PANASONIC Thru beam, 200mm, Side sensing, Light-ON, NPN, high flexible cable 2m View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EX-Z12A-R PANASONIC Thru beam, 200mm, Side sensing, Light-ON, NPN, high flexible cable 2m

EX-Z12A-R

PANASONIC

Thru beam, 200mm, Side sensing, Light-ON, NPN, high flexible cable 2m

More details


Miniature Photoelectric Sensors - PANASONIC > EX10 Ultra-slim type photoelectric sensor - PANASONIC

* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

* This article is restricted. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Product Number EX-Z12A-R
Part Number EX-Z12A-R
Product Ultra-minute Photoelectric Sensor
Details Thru-beam [Side sensing]
Product name Ultra-minute Photoelectric Sensor EX-Z

Item Specifications
Product Number EX-Z12A-R
Part Number EX-Z12A-R
CE marking directive compliance EMC Directive, RoHS Directive
Output operation Light-ON
Sensing range 200 mm7.874 in
Min. sensing object ø0.5 mmø0.02 inopaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 200 mm7.874 in)
Repeatability(perpendicular to sensing axis) 0.03 mm0.001 inor less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 10 mA or less
Receiver: 10 mA or less
Output NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Output:Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (Lights up when the sensing output is ON)
Stability indicator Green LED (Lights up under the stable light received condition or the stable dark condition)
Protection IP67 (IEC)
Ambient temperature -10 to +55 ℃14 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +70 ℃-22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 5,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (Peak emission wavelength: 650 nm0.026 mil, modulated)
Grounding Floating
Material Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
Cable 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlong
Note:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong.
Cable extension Extension up to total 50 m164 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Weight Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
Accessory M2 mounting screws: 1 set (front sensing type: 6 mm0.236 inin length; side sensing type: 10 mm0.394 inin length)
Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉.

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.