D5SN-TB1 168487 OMRON Advanced Sensors, Actuator Sensor head steel sphere Offset. Contact View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

D5SN-TB1 168487 OMRON Advanced Sensors, Actuator Sensor head steel sphere Offset. Contact

D5SN-TB1

168487

OMRON

Available

Ship on today

Advanced Sensors, Actuator Sensor head steel sphere Offset. Contact

More details


* Brand new produt in its original packing covered by the warranties and certifications provided by OMRON

*This price is per unit and is the net value (not including taxes if applicable).

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



ZX-T Contactdisplacement sensor
Smart contact measurement sensor
ZX-T is ideal for applicationswhere the targetobject may contain oil deposits or other micro-structures. In this case contact measurementis the most reliable way.
• Modular platform concept for different sensing technologies
• Air-retracting types for automatedinspection
• Multipoint measurementwith up to 8 sensors
• Pressing force alarm prevents malfunction
• Strong ball bearing structure assures long life time
Ordering information
Sensors
Sensor heads
Size TypeSensing distanceResolution (See note.)Order code
6 dia. Short type1 mm0.1 μmZX-TDS01T Standard type 4 mm ZX-TDS04T Low-load typeZX-TDS04T-L
8 dia. Standard type 10 mm0.4 μmZX-TDS10T Ultra-low-load type ZX-TDS10T-L Air lift type ZX-TDS10T-V
Air lift/air push typeZX-TDS10T-VL
Note:The resolution refers to the minimum value that can be read when a ZX-TDA_1 amplifier unit is connected.
Amplifier units
Power supplyOutput typeOrder code
DC NPNZX-TDA11
PNPZX-TDA41
Accessories (order separately)
Calculating unitZX-series communications interface unit
Order code
Calculating unitZX-CAL2
NameOrder code
ZX-series communications interface unitZX-SF11
SmartMonitor sensor setup tool for Personal Computer connection Cables with connectors on both ends (for extension)*
NameOrder code
ZX-series communications interface unitZX-SF11
Cable lengthOrder code
1 mZX-XC1A
ZX-series communications interface unit
+ setup software (CD-ROM)
ZX-SFW11EV3*1,*2
*1
4 mZX-XC4A
8 mZX-XC8A
ZX-series sensor setup and logging software (CD-ROM)ZX-SW11EV3
*1When using the ZX-TDA11/41 with the SmartMonitor, either the ZX-SFW11EV3 or the
ZX-SW11EV3 SmartMonitor must be used. Earlier versions cannot be used.
*2The ZX-SFW11EV3 SmartMonitor can be used only to set functions and monitor wave- forms.
Actuators
*Robot cable models are also available. The model numbers are ZX-XC_R.
Preamplifier mounting brackets
RemarksOrder code
Attached to each sensor head ZX-XBT1
For DIN trackmountingZX-XBT2
Type (material) Screw sectionAppearance ApplicationApplicable sensor
(see note.)
ZX-TDS_T
Order code
Ball type (steel)Female screw
M2.5x0.45
Measuring ordinary flat surfaces (standard actuator supplied with the ZX-TDS series)
D5SN-TB1
Ball type
(carbide steel)
Female screw
M2.5x0.45
Measurements where abrasion resistance is critical
Measured objects: Carbide (HR90) or lower.
D5SN-TB2
Ball type (ruby)Female screw
M2.5x0.45
Measurements where abrasion resistance is critical
Measured objects: Carbide (HR90) or higher.
D5SN-TB3
Needle type
(carbide steel)
Male screw
M2.5x0.45
Measuring the bottom of grooves and holesD5SN-TN1
391
ZX-T Contactdisplacement sensor
Type (material) Screw sectionAppearance Application Applicable sensor
(see note.)
ZX-TDS_T
Order code
Flat
(carbide steel)
Male screw
M2.5x0.45
Measuring spherical objects D5SN-TF1
Conversion adapter
(stainless steel)
Through-hole female screw
M2.5x0.45
Mounting D5SN-TN1/-TF1 or commercially available actuators on ZX-TDS-series sensors
D5SN-TA
Note:Replacement possible Conversion adapter required
Specifications
Amplifier units
ItemZX-TDA11ZX-TDA41
Measurement period1 ms
Possible average count settings*1
Linear output*2
Judgement outputs
(3 outputs: HIGH/PASS/LOW)
1, 16, 32, 64, 128, 256, 512, or 1,024
Current output: 4 to 20 mA/F.S., max. load resistance: 300 
Voltage output: ±4 V (±5 V, 1 to 5 V*3), output impedance: 100 
NPN open-collector outputs, 30 VDC, 30 mA max. Residual voltage: 1.2 V max.
PNP open-collector outputs, 30 VDC, 30 mA max. Residual voltage: 2 V max.
Zero reset input, timing input, reset input,ON: Short-circuited with 0-V terminal or 1.5 V or less
ON: Supply voltage short-circuited or supply voltage of 1.5 V or less
judgement output hold input
OFF: Open (leakage current: 0.1 mA max.)
OFF: Open (leakage current: 0.1 mA max.)
Function – Measurement value display– present value/set value/output value display
– Display reverse – ECO mode – number of display digit changes
– Sample hold – peak hold– bottom hold, peak-to-peak hold
– Self-peak hold– self-bottom hold – zero reset
– Initial reset– direct threshold value setting– position teaching
– Hysteresis width setting– timing inputs – reset input
– Judgement output hold input– monitor focus – (A-B) calculations*4
– (A+B) calculations (see note 4.) – sensor disconnection detection
– Zero reset memory – function lock – non-measurement setting
– Clamp value setting– scale inversion– zero reset indicator
– Span adjustment– warming-up display– pressing force alarm
IndicatorsJudgement indicators: High (orange), pass (green), low (yellow), 7-segment main digital display (red), 7-segment sub-digital display (yellow), power ON (green),zero reset (green), enable (green)
Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption140 mA max. (with sensor connected), for 24-VDC power supply voltage: 140 mA max. (with sensor connected)
Ambient temperatureOperating and storage: 0to 50C (with no icing or condensation)
Temperature characteristic0.03% F.S./C
Connection methodPrewired (standard cable length: 2 m)
Weight (packed state) Approx. 350 g
MaterialsCase: PBT (polybutylene terephthalate), cover: Polycarbonate
*1The response speed of the linear output is calculated as the measurement period x (average count setting + 1).
The response speed of the judgement outputs is calculated as the measurement period x (average count setting + 1).
*2The output can be switched between a current output and voltage output using a switch on the bottom of the amplifier unit.
*3Setting is possible via the monitor focus function.
*4A calculating unit (ZX-CAL2) is required.
Sensor heads
ItemZX-TDS01T ZX-TDS04T ZX-TDS04T-L Measurement range1 mm 4 mm
Maximum actuator travel distance Approx. 1.5 mm Approx. 5 mm
Resolution*1
Linearity*2
Operating force *3
0.1 μm
±0.3% F.S.
Approx. 0.7 N Approx. 0.25 N
Degree of protection (sensor head)IEC60529, IP67 IEC60529, IP54
Mechanical durability 10,000,000 operations min.
Ambient temperatureOperating: 0 to 50°C, storage: –15 to 60°C (with no icing or condensation)
Ambient humidityOperating and storage: 35% to 85% (with no icing or condensation)
Temperature characteristic*4
Sensor head0.03% F.S./C
Preamplifier 0.01% F.S./C
Weight (packed state) Approx. 100 g Materials Sensor headStainless steel Preamplifier Polycarbonate
AccessoriesInstruction manual, preamplifier mounting brackets(ZX-XBT1)
*1The resolution is given as the minimum value that can be read when a ZX-TDA_1 amplifier unit is connected. This value is taken 15 minutes after turning ON the power with the average number of operations set to 256.
*2The linearity is given as the error in an ideal straight line displacement output.
*3These figures are representative values that apply for the measurement mid-point, and are for when the provided actuator is used, with the actuator moving downwards. If the actuator moves horizontally or upwards, the operating force will be reduced. Also, if an actuator other than the standard one is used, the operating force will vary with the weight of the actuator itself.
*4These figures are representative values that apply for the mid-point of the measurement range.
392

Datasheet - PDF

Title:Language:Size:Type:
pdf1-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1 English174 Kbytespdf1-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1
pdf2-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1 English870 Kbytespdf1-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1
pdf3-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1 English846 Kbytespdf1-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1
pdf4-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1 English3 Mbytespdf1-mostradoSteel ball fitted as standard to sensor heads, general purpose, flat surfaces - OMRON - D5SN-TB1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review