E39-F2 E39F2033R 323183 OMRON Right Angle Fiber Optic Lens D4mm

E39/E32 Fiber accessories
Accessories
ShapeTypeComment Order code
Focal lens – Extends sensing distance by more than 500%
– For M4 Through beam fibersE32-TC200, E32-ET11R, E32-T11 (fits M2.6 thread)
– 2 pcs per set
E39-F1
Focal lens (side view) – For M4 through beam fibersE32-TC200, E32-ET11R, E32-T11, E32-T61-S, E32-T81R-S (fits M2.6 thread)
– Temperature range –40 to 200°C
– 2 pcs per set
E39-F2
Focal lens (variable) – For precision detection with E32-D32, E32-EC41E39-F3A Focal lens – For precision detection with E32-EC41E39-F3A-5
– For precision detection with E32-EC41E39-F3B
– For precision detection with M6 coaxial diffuse reflective fibers (e.g. E32-CC200)E39-F18
Focal lens (side view, variable) – For precision detection with E32-EC31E39-EF51
Focal lens (heat resistant) – Extends sensing distance by more than 500%
– For M4 through beam fibers E32-ET51, E32-T61, E32-T61-S, E32-T81R, E32-T81R-S (fits M4 thread)
– Temperature range –60 to 350°C
– 2 pcs per set
E39-EF1-37-2
E39-F16
Focal lens (vacuum resistant, heat resistant)
– Fits E32-T51V and E32-T54V (fits M2.6 thread)
– 2 units per set
– Heat resistant up to 120°C
E39-F1V
Fiber cutter– Included in applicable fiberE39-F4
Thin fiber attachment – Amplifier adapter for thin fibers
– Included in applicable fiber (2 sets)
E39-F9
Sleeve bender– For E32-TC200B(4)
– For E32-TC200F(4)
– For E32-DC200F(4)
E39-F11
Single fiber extension connector
– Fiber extension connector for 2.2 mm dia standard fibers
– One unit
E39-F10
Dual fiber extension connector – For fibers with dia 2.2 E39-F13
– For fiber with dia 1.0E39-F14
– For fibers with dia between 1.0 and 2.2E39-F15
Protective spiral tube *1
Fiber on roll *2
– For M3 diffuse type sensors
– Length 1 m
– For M3 through beam type sensors
– Length 1 m
– For M4 through beam type sensors
– Length 1 m
– For M6 diffuse type sensors
– Length 1 m
– Dia 2.2 mm
– Standard monocore, 10 mm bending radius
– –40 to 80°C
– Dia 1.1 mm
– Standard monocore, 15 mm bending radius
– –40 to 80°C
– Dia 2.2 mm
– High flex multicore, 1 mm bending radius
– –40 to 80°C
– Dia 1.1 mm
– High flex multicore, 1 mm bending radius
– –40 to 80°C
– Dia 2.2 mm
– High temperature monocore, 20 mm bending radius
– –60 to 150°C
E39-F32A E39-F32B E39-F32C E39-F32D
E32-E01 100M E32-E02 100M E32-E01R 100M E32-E02R 100M
E32-E05 100M
*1Protective spiral tubes with 0.5 m length are available. Add '5' to order code … e.g. E39-F32A5
*2Fiber length 100 m on a roll – cut to length
261