ZX-GIF41A 238031 OMRON Advanced Sensors, Interface RS-232C communications. ZX-G View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ZX-GIF41A 238031 OMRON Advanced Sensors, Interface RS-232C communications. ZX-G

ZX-GIF41A

238031

OMRON

Available

Ship on today

Advanced Sensors, Interface RS-232C communications. ZX-G

More details


Monitoring Products Measurement

Measurement sensors - Laser micrometer - OMRON

Measurement sensors - Laser micrometer - ZX-GT - OMRON

* Brand new produt in its original packing covered by the warranties and certifications provided by OMRON

QuantityPrice
1+$885.63
2+$879.48
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



ZX-GT Laser micrometer
Smart laser micrometer
• High accuracy: 5 to 10 μm
• All surfaces
• Long sensing distance: < 500 mm
• Line width up to 28 mm
• Calculation unit for multiple heads
• Fast sampling time: 0.5 ms
• PC software for setup
Ordering information
Sensors
Type Optical system Measuring width Sensing distance Resolution Output type Order code
Separate type Through-beam 28 mm 0 to 500 mm 10 μm NPN ZX-GT28S11
PNP ZX-GT28S41
Integrated type 40 mm NPN ZX-GT2840S11
PNP ZX-GT2840S41
Controller
Power supply Output type Order code
DC NPN ZX-GTC11
PNP ZX-GTC41
Accessories (order separately)
Set of interface unit and setup software PCs
Output type Order code
Calculating units
Order code
NPN ZX-GIF11A PNP ZX-GIF41A
Interface unit(RS-232C/binary output)
Power supply Output type Order code
DC NPN ZX-GIF11
PNP ZX-GIF41
Setup software PCs
Name Order code
Smart monitor GT ZX-GSW11
Calculating unit ZX-CAL2
Receiver-controller extension cable
Cable length Quantity Order code
Standard cable Flexible cable
1m 1 m ZX-XGC1A ZX-XGC1R
2m ZX-XGC2A ZX-XGC2R
5m ZX-XGC5A ZX-XGC5R
8m ZX-XGC8A ZX-XGC8R
20 m ZX-XGC20A ZX-XGC20R
Up to two extension cables can be connected. However, be sure to limit the total extension cable length between the receiver and the controller to 30 meters (including the receiver cable).
397
ZX-GT Laser micrometer
Specifications
Sensor
Item ZX-GT28S11 ZX-GT2840S11 ZX-GT28S41 ZX-GT2840S41
Output type NPN PNP
Appearance Separate type Integrated type Separate type Integrated type
Light source Visible semiconductor laser diode (wavelength 650 nm, CLASS 1 of EN60825-1/IEC60825-1, CLASS of FDA(21CFR 1040.10 and 1040.11)
Measuring width 28 mm
Sensing distance 0 to 500 mm 40 mm 0 to 500 mm 40 mm
Minimum sensing object 0.5 mm dia.*1
Linearity ±0.1% F.S.*2
0.2 mm dia. 0.5 mm dia.*1 0.2 mm dia.
Resolution 10 μm (number of process values to average: 16)*3
Temperature characteristic ±0.01% F.S/C*4
Indicators (emitter) Laser ON indicator (green), laser alarm indicator (red)
Indicator (receiver) Optical axis setting indicator (green)
Laser OFF input/sync input ON: Short-circuited with 0 V or 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Laser deterioration alarm output NPN open-collector output
30 VDC 20 mA max. Residual voltage 1.2 V max.
Power consumption (emitter) 30 mA max.
Power supply voltage (emitter) 24 VDC+10%, –15% ripple (p-p) 10% max.
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Insulation resistance 20 M (at 500 VDC megger)
ON: Short-circuited with power supply voltage or power supply voltage -1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
PNP open-collector output
30 VDC 20 mA max. Residual voltage 2 V max.
Operating ambient illumination
(emitter)
Operating ambient illumination
(receiver)
3,000 lx (incandescent light)
1,000 lx (incandescent light)*5
Ambient temperature Operating: 0 to 40°C, storage: –15 to 50°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Vibration resistance (durability) 10 to 150 Hz single-amplitude: 0.75 mm for 80 min each in X, Y and Z directions
Degree of protection IEC60529 IP40
Cable length 2m
Material Case: aluminum die-cast, Lens: glass
Weight (packed state) Approx. 550 g Approx. 570 g Approx. 550 g Approx. 570 g
Accessories Laser warning labels, instruction sheet
F.S.: 28 mm measuring range of receiver
*1 Distance between emitter and receiver: 500 mm, measurement object at 250 mm from receiver. Glass ends of chamfer 0.1 mm or more can be detected in glass edge measurement mode. (at binary level 70%)
*2 Linearity is given to be a typical error with respect to an ideal straight line when the distance between the emitter and receiver is 100 mm and light is blocked at a distance of 50 mm from the
receiver. (On the ZX-GT2840_, the measurement object is measured at a distance of 20 mm from the receiver.)
*3 The amount of fluctuation (±3 ) in the analog output when the distance between the emitter and receiver is 100 mm and a ZX-GTC_ is connected
*4 Change in the light cutoff value on one side when the distance between the emitter and receiver is 100 mm and the light is half-cutoff at a distance of 50 mm from the receiver (On the
ZX-GT2840_, the measurement object is measured at a distance of 20 mm from the receiver.)
*5 Standard mode (NORM) used
Controller
Item ZX-GTC11 ZX-GTC41
Output type NPN PNP
Measurement cycle*1 1.5 ms (standard mode (NORM))
0.5 ms (high-speed mode (FAST))*2
Samples to average 1/2/4/8/16/32/64/128/256/512/1024/2048/4096
Analog output*3 For current output: 4 to 20 mA/F.S., max. load resistance 300 
For voltage output: ±4 V, (±5 V, 1 to 5 V*4), output impedance 100 
Timing input, bank switching input, zero reset input, reset input
HIGH/PASS/LOW Judgment output*5
Sync output*6
ON: short-circuited with 0 V or 1.5 V max. OFF: Open (leakage current: 0.1 mA max.)
NPN open-collector output
30 VDC 50 mA max. Residual voltage 1.2 V max.
ON: short-circuited with power supply voltage or power supply voltage -1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
PNP open-collector output
30 VDC 50 mA max. Residual voltage 2 V max.
Indicator Judgment output indicator: HIGH (orange), PASS (green), LOW (orange) Main display (red) sub-display (yellow) bank 1/2 (orange), zero reset (green)
Main functions
Number of registered setups
2 banks
Measurement mode Interrupted beam width measurement, incident beam width measurement, outer diameter measurement, center position measurement, IC lead pitch,
IC lead width judgment, specified edge measurement, wire position measurement, glass edge position measurement
Display during measurement
Measured value, resolution, threshold, voltage output value, current output value (number of display digits can be changed)
Zero reset functions Offset setting of zero reset value, zero reset value memory
Hold Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold
Timer functions ON-delay, OFF-delay, one-shot
Adjustment functions Optical axis adjust mode/light intensityt writing mode, variable binary level, variable edge filter, analog output scaling
Calculation 2 possible on up to two controllers (calculation Unit ZX-CAL2 is required for connecting controllers to each other.) A-B, A+B, width
Other Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock
398
ZX-GT Laser micrometer
Item ZX-GTC11 ZX-GTC41
Temperature characteristic ±0.005% F.S./°C
Current consumption 150 mA max. (including receiver)
Power supply voltage 24 VDC+10%, –15% ripple (p-p) 10% max.
Dielectric strength 1,000 VAC, 50/60 Hz for min
Insulation resistance 20 M (at 500 VDC megger)
Ambient temperature Operating: 0 to 50°C, storage: –15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Vibration resistance(durability) 10 to 150 Hz single-amplitude: 0.35 mm for 80 min each in X, Y and Z directions
Degree of protection IEC60529 IP20
Cable length 2m
Material Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Weight (packed state) Approx. 330 g
Accessories Instruction sheet
*1 The first response time is “measurement cycle x (number of samples to average setting + 1) + 1 ms” max. For the second response time onwards, the specified measurement cycle time is output.
*2 The response time in the high-speed mode (FAST) for the IC lead pitch and IC lead width judgment modes is 1 ms.
*3 Current/voltage can be switched using the switch provided on the rear of the Controller.
*4 Can be set by the analog output scaling function.
*5 The error (ERR) state is displayed when all HIGH/PASS/LOW outputs turn OFF.
*6 Normally, wire the sync output wire directly to the emitter's sync input wire and run the controller in the standard mode. On an NPN type controller, use an NPN type emitter, and on a PNP
type controller, use a PNP type emitter. Wiring of the sync wires is not required when the controller is run in the high-speed mode. (Note, however, that the controller becomes more susceptible to the influence of ambient light in this case.)
Interface unit
Item ZX-GIF11/-GIF11A ZX-GIF41/-GIF41A Compatible controller ZX-GTC11 ZX-GTC41
Indicator Power ON (green), controller communications (orange), controller communications error (red), RS-232C communications (orange), RS-232C communications error (red), binary output (orange)
Communications port RS-232C (9-pin D-sub connector)
12-bit binary output
(D11 toD0, GATE)
NPN open-collector output
30 VDC 20 mA max. Residual voltage 1.2 V max.
PNP open-collector output
30 VDC 20 mA max. Residual voltage 2 V max.
Power supply voltage Supplied from controller (power consumption: 60 mA max.)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Insulation resistance 20 M (at 500 VDC megger)
Ambient temperature Operating: 0 to 50°C, storage: –15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Vibration resistance(durability) 10 to 150 Hz single-amplitude: 0.35 mm for 80 min each in X, Y and Z directions
Degree of protection IEC60529 IP20
Cable length RS-232C 0.5 m, binary output 2 m
Material Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Weight (packed state) ZX-GIF_1A: Approx. 550 g
ZX-GIF_1: Approx. 330 g
Accessories ZX-GIF_1A: Setup coftware (CD-ROM), 2 clamps, instruction sheet
ZX-GIF_1: 2 clamps, instruction sheet
399

Datasheet - PDF

Title:Language:Size:Type:
pdf1-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031English171 Kbytespdf1-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031
pdf1-Interface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031English5 Mbytespdf1-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031
pdf2-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031English3 Mbytespdf1-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031
pdf3-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031English499 Kbytespdf1-mostradoInterface unit with setup software, PNP 12-bit binary output - OMRON - ZX-GIF41A - 238031

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or