CS1W-MD291 CS1W3005G 182917 OMRON Module 48/48 I/O NPN Outputs

CS-Series digitalI/O unitsRack PLC
Up to 96 I/O points per unit – input, output or mixed
Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence control. A full range of units, from high-speedDC inputs to relay outputs, let you adapt CS1 to your needs.
CS1 units are available with various I/O densities and connection technologies. Up to
16 I/O points can be wired to units with detachable M3 screw terminalsdirectly. High- density 32- and 64- point I/O units are equippedwith standard40-pin connectors.
Prefabricated cables and wiring terminals are available for easy interfacing to high- density I/O units.
Ordering information
PointsType Rated voltage Rated current
Remarks Connection typeOrder code*1
16AC or DC input 120VAC or VDC10 mA – M3 CS1W-IA111
16AC input 240 VAC 10 mA – M3 CS1W-IA211
16DC input24 VDC7 mA– M3 CS1W-ID211
16DC input24 VDC7 mAInputs start interrupt tasks in PLC programM3 CS1W-INT01
16DC input24 VDC7 mALatches pulses down to 50 μs pulse width M3 CS1W-IDP01
32DC input24 VDC6 mA– 1 × 40 pt Fujitsu CS1W-ID231
64DC input24 VDC6 mA– 2 × 40 pt Fujitsu CS1W-ID261
96DC input24 VDC5 mA– 2 × 56 pt Fujitsu CS1W-ID291
8Triac output250 VAC1.2 A – M3 CS1W-OA201
16Triac output250 VAC0.5 A – M3 CS1W-OA211
8Relay output 250 VAC2.0 A – M3 CS1W-OC201
16Relay output 250 VAC2.0 A – M3 CS1W-OC211
16DC output (sink)12 to 24 VDC0.5 A – M3 CS1W-OD211
16DC output (source) 24 VDC 0.5 AWith short-circuit protection,alarm M3 CS1W-OD212
32DC output (sink) 12 to 24 VDC0.5 A – 1 × 40 pt Fujitsu CS1W-OD231
32DC output (source) 24 VDC 0.5 AWith short-circuit protection,alarm 1 × 40 pt Fujitsu CS1W-OD232
64DC output (sink) 12 to 24 VDC0.3 A – 2 × 40 pt Fujitsu CS1W-OD261
64DC output (source) 24 VDC 0.3 AWith short-circuit protection,alarm 2 × 40 pt Fujitsu CS1W-OD262
96DC output (sink) 12 to 24 VDC0.1 A – 2 × 56 pt Fujitsu CS1W-OD291
96DC output (source)24 VDC 0.1 A – 2 × 56 pt Fujitsu CS1W-OD292
32+32DC output (sink) 12 to 24 VDC0.3 A – 2 × 40 pt Fujitsu CS1W-MD261
32+32DC in+out (source) 24 VDC 0.3 AWith short-circuit protection,alarm 2 × 40 pt Fujitsu CS1W-MD262
48+48DC output (sink) 12 to 24 VDC0.1 A – 2 × 56 pt Fujitsu CS1W-MD291
48+48DC in+out (source) 12 to 24 VDC0.1 A – 2 × 56 pt Fujitsu CS1W-MD292
*1C200H I/O units can also be mounted, except on CS1D systems.
Note:All Digital I/O units are designated as Basic I/O units.
Accessories
Description Connection typeOrder code
Connection cable between I/O terminal block and I/O unit with 40-pt Fujitsu connector( _ _ _ = length in cm)Fujitsu (40pt) XW2Z- B
I/O terminal block for input unit with 40-pt Fujitsu connectorPush-inXW2R-P34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connectorPush-inXW2R-P34G-C3
I/O terminal block for input unit with 40-pt Fujitsu connectorClamp XW2R-E34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connectorClamp XW2R-E34G-C3
I/O terminal block for input unit with 40-pt Fujitsu connectorM3 Screws XW2R-J34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connectorM3 Screws XW2R-J34G-C3
Note:For I/O Cables and Terminal Blocks, see page 72
39