Product successfully added to your shopping cart
ZX-EM02HT
162403
ZXEM02HT
OMRON
1
Available Ship on today
Head sensor M12 Enr. 2.0 mm Resist. temperature 200 °
M12 Enr sensor head. 2.0mm Resist. 200th
Sensors > Inductive proximity switch
Advanced sensors > ZX
* Brand new product in its original packaging covered by the warranties and certifications provided by OMRON
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Resolution1 | ||||
---|---|---|---|---|
ZX-ED01T2 | ||||
ZX-ED02T2 | ||||
ZX-EM02T2 | ||||
ZX-EM07MT2 | ||||
ZX-EM02HT4 |
Note: Compatible connection with the sensor head.
ZX-SFW11EV35 | |
*Robot cable models are also available. The model numbers are ZX-XC_R.
Magnetic metals | ||||||||
Resolution6 | ||||||||
Linearity7 | ±1% F.S.8 | |||||||
Temperature characteristic9 | ||||||||
Operating10 | ||||||||
Storage5 | ||||||||
1,000 VAC, 50/60 Hz for 1 min between charged parts and case | ||||||||
10 to 55 Hz with 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | ||||||||
IEC60529, IP6011 | ||||||||
Possible average count settings12 | 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096 | |
Linear output13 | Current output: 4 to 20 mA/F.S., max. load resistance: 300 Ω Voltage output:±4 V (±5 V, 1 to 5 V14), output impedance: 100 Ω | |
NPN open-collector outputs, 30 VDC, 50 mA max. | PNP open-collector outputs, 30 VDC, 50 mA max. | |
Zero reset input, timing input, reset input, judgement output hold input | ON: Supply voltage short-circuited or supply voltage within 1.5 V | |
| ||
Judgement indicators: High (orange), pass (green), low (yellow), 7-segment main digital display (red), | ||
0.5% F.S. of linear output value at ±20% of power supply voltage | ||
140 mA max. with power supply voltage of 24 VDC (with sensor connected) | ||
Operating and storage: 0 to 50°C (with no icing or condensation) | ||
10 to 150 Hz with 0.7-mm double amplitude for 80 min each in X, Y, and Z directions | ||
300 m/s2, 3 times each in 6 directions (up, down, left, right, forward, backward) | ||
Case: PBT (polybutylene terephthalate), cover: Polycarbonate | ||
2.Models with protective spiral tubes are also available. Add a suffix of “-S” to the above model numbers when ordering. (Example: ZX-ED01T-S)
6.Accuracy: The resolution is the deviation (±3σ) in the linear output when connected to the ZX-EDA amplifier unit. The above values indicate the deviations observed 30 minutes after the power is turned ON.
(The resolution is measured with Omron's standard reference object at ½ of the measurement range with the ZX-EDA set for the maximum average count of 4,096 per period.)
The resolution is given at the repeat accuracy for a stationary workpiece, and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields.
7.Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values vary with the object being measured.
9.Temperature characteristic: The temperature characteristic is measured with Omron's standard reference object at ½ of the measurement range.
12.The response speed of the linear output is calculated as the measurement period x (average count setting + 1) (with fixed sensitivity).
The response speed of the judgement outputs is calculated as the measurement period x (average count setting + 1) (with fixed sensitivity).
Title: | Size: | Type: |
---|---|---|
ZX-EM02HT ZXEM02HT 162403 EN_ZX-EDA11 2M.pdf | 807 Kbytes | |
ZX-EM02HT ZXEM02HT 162403 zx_e_series_brochure_en.pdf | 399 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.