HSP-300-2.8 MEANWELL AC-DC Single output enclosed power supply with PFC, Output 2.8VDC / 60A, 1U low profile..

300W Single Output with PFC Function 300W Single Output with PFC Function
300W Single Output with PFC Function HSP-300series HSP-300series
HSP-300seriesFeatures : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds Built-in active PFC function Built-in active PFC function
Built-in active PFC function Low leakage current#1mA Low leakage current#1mA
Low leakage current#1mA Protections: Short circuit / Overload / Over voltage/ Over temperature Protections: Short circuit / Overload / Over voltage/ Over temperature
Protections: Short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Low profile:31mm Low profile:31mm
Low profile:31mm Conformalcoated Conformalcoated
Conformalcoated LED indicator for power on LED indicator for power on
LED indicator for power on Suitable for high efficiency moving sign applications Suitable for high efficiency moving sign applications
Suitable for high efficiency moving sign applications 3 years warranty 3 years warranty
3 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION Bauar t gepr u f t Bauar t gepr u f t
Bauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma ge
Sicherheit egel ma ge od o s od o s
od o s be wacg be wacg
be wacg www. tuv. com www. tuv. com
www. tuv. com ID 2000000000 ID 2000000000
ID 2000000000 MODEL MODEL
MODEL HSP-300-2.8HSP-300-4.2 HSP-300-2.8HSP-300-4.2
HSP-300-2.8HSP-300-4.2 HSP-300-5 HSP-300-5
HSP-300-5 DC VOLTAGE RATED CURRENT DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT 2.8V 2.8V
2.8V 60A 60A
60A 4.2V 4.2V
4.2V 60A 60A
60A 5V 5V
5V 60A 60A
60A CURRENT RANGE Note.5 CURRENT RANGE Note.5
CURRENT RANGE Note.5 RATED POWER(convection) RATED POWER(convection)
RATED POWER(convection) 0 ~ 60A0 ~ 60A 0 ~ 60A0 ~ 60A
0 ~ 60A0 ~ 60A 168W 252W 168W 252W
168W 252W 0 ~ 60A 0 ~ 60A
0 ~ 60A 300W 300W
300W OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2110mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.2110mVp-p 150mVp-p
RIPPLE & NOISE (max.) Note.2110mVp-p 150mVp-p 150mVp-p 150mVp-p
150mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LINE REGULATION
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.)
LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) 2.5~3V3.6~4.4V 2.5~3V3.6~4.4V
2.5~3V3.6~4.4V 2.0%2.0% 2.0%2.0%
2.0%2.0% 0.5%0.5% 0.5%0.5%
0.5%0.5% 1.0%1.0% 1.0%1.0%
1.0%1.0% 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 8ms/230VAC8ms/115VAC at full load 8ms/230VAC8ms/115VAC at full load
8ms/230VAC8ms/115VAC at full load 4.5~5.5V 4.5~5.5V
4.5~5.5V 2.0% 2.0%
2.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% VOLTAGE RANGE Note.4 180 ~ 264VAC254 ~ 370VDC or 90~135VAC 127~190VDC VOLTAGE RANGE Note.4 180 ~ 264VAC254 ~ 370VDC or 90~135VAC 127~190VDC
VOLTAGE RANGE Note.4 180 ~ 264VAC254 ~ 370VDC or 90~135VAC 127~190VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.93/230VACPF 0.98/115VAC at full load PF0.93/230VACPF 0.98/115VAC at full load
PF0.93/230VACPF 0.98/115VAC at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT 80% 80%
80% 2.8A/115VAC 1.4A/230VAC 2.8A/115VAC 1.4A/230VAC
2.8A/115VAC 1.4A/230VAC Cold start30A/115VAC60A/230VAC Cold start30A/115VAC60A/230VAC
Cold start30A/115VAC60A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC 105~150% rated output power 105~150% rated output power
105~150% rated output power 85% 85%
85% 3.9A/115VAC 1.95A/230VAC 3.9A/115VAC 1.95A/230VAC
3.9A/115VAC 1.95A/230VAC 87% 87%
87% 4.7A/115VAC 2.35A/230VAC 4.7A/115VAC 2.35A/230VAC
4.7A/115VAC 2.35A/230VAC OVERLOAD OVERLOAD
OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.22 ~ 3.78V 4.6 ~ 5.4V 3.22 ~ 3.78V 4.6 ~ 5.4V
3.22 ~ 3.78V 4.6 ~ 5.4V5.7 ~ 7.0V 5.7 ~ 7.0V
5.7 ~ 7.0VENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 5) (Note 5)
(Note 5) OTHERS OTHERS
OTHERS OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after fault condition is removed Shut down o/p voltage, recovers automatically after fault condition is removed
Shut down o/p voltage, recovers automatically after fault condition is removed -30 ~ +70(Refer to "Derating Curve") -30 ~ +70(Refer to "Derating Curve")
-30 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1,EN60950-1,CCC GB4943 approved UL60950-1,EN60950-1,CCC GB4943 approved
UL60950-1,EN60950-1,CCC GB4943 approved I/P-O/P:3.0KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P:3.0KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC
I/P-O/P:3.0KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Compliance to EN55022 (CISPR22),GB9254,Class B, EN61000-3-2,-3,GB17625.1 Compliance to EN55022 (CISPR22),GB9254,Class B, EN61000-3-2,-3,GB17625.1
Compliance to EN55022 (CISPR22),GB9254,Class B, EN61000-3-2,-3,GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A 263.2K hrs min.MIL-HDBK-217F (25) 263.2K hrs min.MIL-HDBK-217F (25)
263.2K hrs min.MIL-HDBK-217F (25) 210*81*31mm (L*W*H) 210*81*31mm (L*W*H)
210*81*31mm (L*W*H) 0.8kg; 15pcs/ 12.1kg/ 0.7CUFT 0.8kg; 15pcs/ 12.1kg/ 0.7CUFT
0.8kg; 15pcs/ 12.1kg/ 0.7CUFT NOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and loadregulation. 3. Tolerance : includes set up tolerance, line regulation and loadregulation.
3. Tolerance : includes set up tolerance, line regulation and loadregulation. 4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Please refer to "Static Characteristics". 5. Please refer to "Static Characteristics".
5. Please refer to "Static Characteristics". 6. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 450mm*450mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com) 6. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 450mm*450mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com)
6. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 450mm*450mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com)File Name:HSP-300-SPEC2016-01-21 File Name:HSP-300-SPEC2016-01-21
File Name:HSP-300-SPEC2016-01-21