40W Single Output Switching Power Supply
40W Single Output Switching Power Supply
40W Single Output Switching Power SupplyFeatures :
Features :
Features :
HLG-40Hseries
HLG-40Hseries
HLG-40Hseries F110
F110
F110MM SELVIP65 IP67
MM SELVIP65 IP67
MM SELVIP65 IP67
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Built-in active PFC function
Built-in active PFC function
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Coolingby freeair convection
Coolingby freeair convection
Coolingby freeair convection
OCPpoint adjustable through output cable or internal potentiometer
OCPpoint adjustable through output cable or internal potentiometer
OCPpoint adjustable through output cable or internal potentiometer
IP67/ IP65design for indooror outdoor installations
IP67/ IP65design for indooror outdoor installations
IP67/ IP65design for indooror outdoor installations
Class 2 power unit
Class 2 power unit
Class 2 power unit
Three in onedimmingfunction(1B10Vdcor PWM signal or resistance)
Three in onedimmingfunction(1B10Vdcor PWM signal or resistance)
Three in onedimmingfunction(1B10Vdcor PWM signal or resistance)
Suitable for LED lighting andmovingsignapplications
Suitable for LED lighting andmovingsignapplications
Suitable for LED lighting andmovingsignapplications
Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet location
Suitable for dry / damp / wet location
Suitable for dry / damp / wet location
7 years warranty (Note.10)
7 years warranty (Note.10)
7 years warranty (Note.10)
( for 48V,54V only)
( for 48V,54V only)
( for 48V,54V only)
( except for 48V,54V )
( except for 48V,54V )
( except for 48V,54V )HLG-40H-12 A
HLG-40H-12 A
HLG-40H-12 A
Blank: IP67rated. Cable for I/O connection.
Blank: IP67rated. Cable for I/O connection.
Blank: IP67rated. Cable for I/O connection.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
B : IP67 rated.Constant current level adjustable through output cablewith 1B10Vdc or 10V PWM signal or resistance
B : IP67 rated.Constant current level adjustable through output cablewith 1B10Vdc or 10V PWM signal or resistance
B : IP67 rated.Constant current level adjustable through output cablewith 1B10Vdc or 10V PWM signal or resistance
D (option) : IP67 rated.Timer dimming function, contactMEAN WELL for details.
D (option) : IP67 rated.Timer dimming function, contactMEAN WELL for details.
D (option) : IP67 rated.Timer dimming function, contactMEAN WELL for details.SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
HLG-40H-12HLG-40H-15HLG-40H-20HLG-40H-24HLG-40H-30HLG-40H-36HLG-40H-42HLG-40H-48HLG-40H-54
HLG-40H-12HLG-40H-15HLG-40H-20HLG-40H-24HLG-40H-30HLG-40H-36HLG-40H-42HLG-40H-48HLG-40H-54
HLG-40H-12HLG-40H-15HLG-40H-20HLG-40H-24HLG-40H-30HLG-40H-36HLG-40H-42HLG-40H-48HLG-40H-54
DC VOLTAGE
DC VOLTAGE
DC VOLTAGE
12V
12V
12V
15V
15V
15V
20V
20V
20V
24V
24V
24V
30V
30V
30V
36V
36V
36V
42V
42V
42V
48V
48V
48V
54V
54V
54V
CONSTANT CURRENT REGION Note.47.2 ~12V
CONSTANT CURRENT REGION Note.47.2 ~12V
CONSTANT CURRENT REGION Note.47.2 ~12V
9 ~ 15V
9 ~ 15V
9 ~ 15V
12 ~ 20V
12 ~ 20V
12 ~ 20V
14.4 ~ 24V
14.4 ~ 24V
14.4 ~ 24V
18 ~ 30V
18 ~ 30V
18 ~ 30V
21.6 ~ 36V
21.6 ~ 36V
21.6 ~ 36V
25.2 ~ 42V
25.2 ~ 42V
25.2 ~ 42V
28.8 ~ 48V
28.8 ~ 48V
28.8 ~ 48V
32.4 ~ 54V
32.4 ~ 54V
32.4 ~ 54V
RATED CURRENT RATED POWER
RATED CURRENT RATED POWER
RATED CURRENT RATED POWER
3.33A2.67A 2A 1.67A 1.34A 1.12A
3.33A2.67A 2A 1.67A 1.34A 1.12A
3.33A2.67A 2A 1.67A 1.34A 1.12A
39.96W40.05W40W40.08W40.2W40.32W
39.96W40.05W40W40.08W40.2W40.32W
39.96W40.05W40W40.08W40.2W40.32W
0.96A
0.96A
0.96A
40.32W
40.32W
40.32W
0.84A
0.84A
0.84A
40.32W
40.32W
40.32W
0.75A
0.75A
0.75A
40.5W
40.5W
40.5W
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
300mVp-p
300mVp-p
300mVp-p
300mVp-p
300mVp-p
300mVp-p
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V
13.5 ~ 17V
13.5 ~ 17V
13.5 ~ 17V
17 ~ 22V
17 ~ 22V
17 ~ 22V
22 ~ 27V
22 ~ 27V
22 ~ 27V
27 ~ 33V
27 ~ 33V
27 ~ 33V
33 ~ 40V
33 ~ 40V
33 ~ 40V
40 ~ 46V
40 ~ 46V
40 ~ 46V
44 ~ 53V
44 ~ 53V
44 ~ 53V
49 ~ 58V
49 ~ 58V
49 ~ 58V
OUTPUT
OUTPUT
OUTPUTCURRENT ADJ. RANGE
CURRENT ADJ. RANGE
CURRENT ADJ. RANGE
Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only
2 ~ 3.33A
2 ~ 3.33A
2 ~ 3.33A
1.6 ~ 2.67A
1.6 ~ 2.67A
1.6 ~ 2.67A
1.2 ~ 2A
1.2 ~ 2A
1.2 ~ 2A
1 ~ 1.67A
1 ~ 1.67A
1 ~ 1.67A
0.8 ~ 1.34A
0.8 ~ 1.34A
0.8 ~ 1.34A
0.67 ~ 1.12A
0.67 ~ 1.12A
0.67 ~ 1.12A
0.58 ~ 0.96A 0.5 ~ 0.84A
0.58 ~ 0.96A 0.5 ~ 0.84A
0.58 ~ 0.96A 0.5 ~ 0.84A
0.45 ~ 0.75A
0.45 ~ 0.75A
0.45 ~ 0.75A
VOLTAGE TOLERANCENote.32.5%
VOLTAGE TOLERANCENote.32.5%
VOLTAGE TOLERANCENote.32.5%
2.0%
2.0%
2.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIMENote.8500ms, 80msat full load230VAC / 115VAC
SETUP, RISE TIMENote.8500ms, 80msat full load230VAC / 115VAC
SETUP, RISE TIMENote.8500ms, 80msat full load230VAC / 115VAC
HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VACat full load
16ms/230VAC 16ms/115VACat full load
16ms/230VAC 16ms/115VACat full load
VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC
FREQUENCYRANGE POWER FACTOR (Typ.)
FREQUENCYRANGE POWER FACTOR (Typ.)
FREQUENCYRANGE POWER FACTOR (Typ.)
TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic"curve)
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic"curve)
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic"curve)
THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
INPUT
INPUT
INPUT
EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
MAX. No. of PSUs on 16A CIRCUIT BREAKER
MAX. No. of PSUs on 16A CIRCUIT BREAKER
MAX. No. of PSUs on 16A CIRCUIT BREAKER
LEAKAGE CURRENT
LEAKAGE CURRENT
LEAKAGE CURRENT
86.5% 86.5% 88%88%88.5% 88.5%
86.5% 86.5% 88%88%88.5% 88.5%
86.5% 86.5% 88%88%88.5% 88.5%
0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC
0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC
0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC
COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC
COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC
COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 230VAC
12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 230VAC
12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 230VAC<0.75mA / 277VAC
<0.75mA / 277VAC
<0.75mA / 277VAC
88.5%
88.5%
88.5%
89.5%
89.5%
89.5%
89.5%
89.5%
89.5%
OVER CURRENTNote.495 ~ 108%
OVER CURRENTNote.495 ~ 108%
OVER CURRENTNote.495 ~ 108%
Protection type : Constant current limiting, recovers automaticallyafter fault condition is removed
Protection type : Constant current limiting, recovers automaticallyafter fault condition is removed
Protection type : Constant current limiting, recovers automaticallyafter fault condition is removed
PROTECTIONSHORT CIRCUITHiccup mode, recovers automaticallyafter fault condition is removed
PROTECTIONSHORT CIRCUITHiccup mode, recovers automaticallyafter fault condition is removed
PROTECTIONSHORT CIRCUITHiccup mode, recovers automaticallyafter fault condition is removed
15 ~ 21V
15 ~ 21V
15 ~ 21V
18 ~ 24V
18 ~ 24V
18 ~ 24V
23 ~ 30V28 ~ 35V35 ~ 43V41 ~ 49V48 ~ 58V
23 ~ 30V28 ~ 35V35 ~ 43V41 ~ 49V48 ~ 58V
23 ~ 30V28 ~ 35V35 ~ 43V41 ~ 49V48 ~ 58V
54 ~ 65V
54 ~ 65V
54 ~ 65V
59 ~ 68V
59 ~ 68V
59 ~ 68V
OVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
TEMP. COEFFICIENT
TEMP. COEFFICIENT
VIBRATION
VIBRATION
VIBRATION
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
-40 ~ +70C (Refer to "Derating Curve")
-40 ~ +70C (Refer to "Derating Curve")
-40 ~ +70C (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing
-40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH
0.03%/C (0 ~ 60C)
0.03%/C (0 ~ 60C)
0.03%/C (0 ~ 60C)
10 ~ 500Hz, 5G 12min./1cycle,period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle,period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle,period for72min. each along X, Y, Z axes
SAFETY STANDARDS Note.7UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13independent,IP65 or IP67, J61347-1, J61347-2-13approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1
SAFETY STANDARDS Note.7UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13independent,IP65 or IP67, J61347-1, J61347-2-13approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1
SAFETY STANDARDS Note.7UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13independent,IP65 or IP67, J61347-1, J61347-2-13approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1
SAFETY & EMC
SAFETY & EMC
SAFETY & EMCOTHERS
OTHERS
OTHERS
WITHSTANDVOLTAGE ISOLATIONRESISTANCE EMC EMISSION
WITHSTANDVOLTAGE ISOLATIONRESISTANCE EMC EMISSION
WITHSTANDVOLTAGE ISOLATIONRESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKING
PACKING
PACKING
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV),criteria A
336.5Khrs min.MIL-HDBK-217F (25C)
336.5Khrs min.MIL-HDBK-217F (25C)
336.5Khrs min.MIL-HDBK-217F (25C)
171*61.5*36.8mm (L*W*H)
171*61.5*36.8mm (L*W*H)
171*61.5*36.8mm (L*W*H)
0.73Kg; 20pcs/15.6Kg/0.8CUFT
0.73Kg; 20pcs/15.6Kg/0.8CUFT
0.73Kg; 20pcs/15.6Kg/0.8CUFTNOTE
NOTE
NOTE
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25C of ambient temperature.
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25C of ambient temperature.
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25C of ambient temperature.
2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
3. Tolerance : includes setup tolerance, line regulation andloadregulation.
3. Tolerance : includes setup tolerance, line regulation andloadregulation.
3. Tolerance : includes setup tolerance, line regulation andloadregulation.
4. Please refer to "DRIVING METHODSOF LED MODULE".
4. Please refer to "DRIVING METHODSOF LED MODULE".
4. Please refer to "DRIVING METHODSOF LED MODULE".
5. Derating maybe needed under low input voltages. Please check thestatic characteristics for more details.
5. Derating maybe needed under low input voltages. Please check thestatic characteristics for more details.
5. Derating maybe needed under low input voltages. Please check thestatic characteristics for more details.
6. A typeonly.
6. A typeonly.
6. A typeonly.
7. Safety andEMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
7. Safety andEMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
7. Safety andEMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
8. Length of setup time is measured at cold first start. TurningON/OFF thepower supply mayleadto increase of thesetup time.
8. Length of setup time is measured at cold first start. TurningON/OFF thepower supply mayleadto increase of thesetup time.
8. Length of setup time is measured at cold first start. TurningON/OFF thepower supply mayleadto increase of thesetup time.
9. Thepower supply is considered as a component thatwill be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
9. Thepower supply is considered as a component thatwill be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
9. Thepower supply is considered as a component thatwill be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
10. Refer to warranty statement.
10. Refer to warranty statement.
10. Refer to warranty statement.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupplycanonly be used behind a switch without permanently connected to the mains.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupplycanonly be used behind a switch without permanently connected to the mains.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupplycanonly be used behind a switch without permanently connected to the mains.
File Name:HLG-40H-SPEC 2015-07-23
File Name:HLG-40H-SPEC 2015-07-23
File Name:HLG-40H-SPEC 2015-07-23