320W Single Output Switching Power Supply
320W Single Output Switching Power Supply
320W Single Output Switching Power SupplyFeatures :
Features :
Features :
HLG-320Hseries
HLG-320Hseries
HLG-320Hseries
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Built-in active PFCfunction
Built-in active PFCfunction
Built-in active PFCfunction
High efficiencyup to 95%
High efficiencyup to 95%
High efficiencyup to 95%
Protections: Short circuit / Over current / Over voltage / Over temperature
Protections: Short circuit / Over current / Over voltage / Over temperature
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by freeair convection
Cooling by freeair convection
Cooling by freeair convection
OCP point adjustable through outputcable or internal potentiometer
OCP point adjustable through outputcable or internal potentiometer
OCP point adjustable through outputcable or internal potentiometer
IP67 / IP65design for indooror outdoor installations
IP67 / IP65design for indooror outdoor installations
IP67 / IP65design for indooror outdoor installations
Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires
Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires
Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires
Three in onedimmingfunction(1*10Vdc or PWM signalor resistance)
Three in onedimmingfunction(1*10Vdc or PWM signalor resistance)
Three in onedimmingfunction(1*10Vdc or PWM signalor resistance)
Suitable for LED lighting andstreet lighting applications
Suitable for LED lighting andstreet lighting applications
Suitable for LED lighting andstreet lighting applications
Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet location
Suitable for dry / damp / wet location
Suitable for dry / damp / wet location
7 years warranty (Note.10)
7 years warranty (Note.10)
7 years warranty (Note.10)F110
F110
F110M MSELV IP65 IP67
M MSELV IP65 IP67
M MSELV IP65 IP67
Bauar t gepr u f t
Bauar t gepr u f t
Bauar t gepr u f t
Sicherheit egel ma ge
Sicherheit egel ma ge
Sicherheit egel ma ge
od os
od os
od os
be wacg
be wacg
be wacg
www. tuv. com
www. tuv. com
www. tuv. com
ID 2000000000
ID 2000000000
ID 2000000000HLG-320H-12A
HLG-320H-12A
HLG-320H-12A
Blank : IP67 rated. Cable for I/O connection.
Blank : IP67 rated. Cable for I/O connection.
Blank : IP67 rated. Cable for I/O connection.
A : IP65rated. Outputvoltage and constant current level canbe adjusted through internal potentiometer.
A : IP65rated. Outputvoltage and constant current level canbe adjusted through internal potentiometer.
A : IP65rated. Outputvoltage and constant current level canbe adjusted through internal potentiometer.
B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
potentiometer.
potentiometer.
potentiometer.
D (option) : IP67rated. Timer dimmingfunction,contact MEAN WELL for details.
D (option) : IP67rated. Timer dimmingfunction,contact MEAN WELL for details.
D (option) : IP67rated. Timer dimmingfunction,contact MEAN WELL for details.SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36
HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36
HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36
HLG-320H-42
HLG-320H-42
HLG-320H-42
HLG-320H-48
HLG-320H-48
HLG-320H-48
HLG-320H-54
HLG-320H-54
HLG-320H-54
DC VOLTAGE
DC VOLTAGE
DC VOLTAGE
12V
12V
12V
15V
15V
15V
20V
20V
20V
24V
24V
24V
30V
30V
30V
36V
36V
36V
42V
42V
42V
48V
48V
48V
54V
54V
54V
CONSTANT CURRENT REGION Note.46 ~12V
CONSTANT CURRENT REGION Note.46 ~12V
CONSTANT CURRENT REGION Note.46 ~12V
7.5 ~ 15V
7.5 ~ 15V
7.5 ~ 15V
10 ~ 20V
10 ~ 20V
10 ~ 20V
12 ~ 24V
12 ~ 24V
12 ~ 24V
15 ~ 30V
15 ~ 30V
15 ~ 30V
18 ~ 36V
18 ~ 36V
18 ~ 36V
21 ~ 42V
21 ~ 42V
21 ~ 42V
24 ~ 48V
24 ~ 48V
24 ~ 48V
27 ~ 54V
27 ~ 54V
27 ~ 54V
RATED CURRENT RATED POWER
RATED CURRENT RATED POWER
RATED CURRENT RATED POWER
22A 19A15A13.34A 10.7A 8.9A
22A 19A15A13.34A 10.7A 8.9A
22A 19A15A13.34A 10.7A 8.9A
264W285W 300W 320.16W321W 320.4W
264W285W 300W 320.16W321W 320.4W
264W285W 300W 320.16W321W 320.4W
7.65A
7.65A
7.65A
321.3W
321.3W
321.3W
6.7A
6.7A
6.7A
321.6W
321.6W
321.6W
5.95A
5.95A
5.95A
321.3W
321.3W
321.3W
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V13.5 ~ 17V
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V13.5 ~ 17V
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V13.5 ~ 17V
150mVp-p
150mVp-p
150mVp-p
17 ~ 22V
17 ~ 22V
17 ~ 22V
150mVp-p
150mVp-p
150mVp-p
21 ~ 26V
21 ~ 26V
21 ~ 26V
200mVp-p
200mVp-p
200mVp-p
26 ~ 32V
26 ~ 32V
26 ~ 32V
250mVp-p
250mVp-p
250mVp-p
32 ~ 39V
32 ~ 39V
32 ~ 39V
250mVp-p
250mVp-p
250mVp-p
38 ~ 45V
38 ~ 45V
38 ~ 45V
250mVp-p
250mVp-p
250mVp-p
43 ~ 52V
43 ~ 52V
43 ~ 52V
350mVp-p
350mVp-p
350mVp-p
49 ~ 58V
49 ~ 58V
49 ~ 58V
OUTPUT
OUTPUT
OUTPUTCURRENT ADJ. RANGE
CURRENT ADJ. RANGE
CURRENT ADJ. RANGE
Can be adjusted by internal potentiometer A type and C type only
Can be adjusted by internal potentiometer A type and C type only
Can be adjusted by internal potentiometer A type and C type only
11 ~ 22A
11 ~ 22A
11 ~ 22A
9.5 ~ 19A
9.5 ~ 19A
9.5 ~ 19A
7.5 ~ 15A
7.5 ~ 15A
7.5 ~ 15A
6.67 ~ 13.34A5.35 ~ 10.7A 4.45 ~ 8.9A
6.67 ~ 13.34A5.35 ~ 10.7A 4.45 ~ 8.9A
6.67 ~ 13.34A5.35 ~ 10.7A 4.45 ~ 8.9A
3.8 ~ 7.65A
3.8 ~ 7.65A
3.8 ~ 7.65A
3.35 ~ 6.7A
3.35 ~ 6.7A
3.35 ~ 6.7A
2.97 ~ 5.95A
2.97 ~ 5.95A
2.97 ~ 5.95A
VOLTAGE TOLERANCENote.33.0%
VOLTAGE TOLERANCENote.33.0%
VOLTAGE TOLERANCENote.33.0%
2.0%
2.0%
2.0%
1.5%
1.5%
1.5%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5%
2.0%1.5%1.0%0.5%0.5%0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load
SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load
SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load
HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.)
15ms at full load 230VAC /115VAC
15ms at full load 230VAC /115VAC
15ms at full load 230VAC /115VAC
VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (Please refer to "Power Factor Characteristic" curve)
PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (Please refer to "Power Factor Characteristic" curve)
PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC input
TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC input
TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC inputINPUT
INPUT
INPUT
EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac)
EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac)
EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac)
91%
91%
91%
91.5%
91.5%
91.5%
92.5%
92.5%
92.5%
93%
93%
93%
93.5%
93.5%
93.5%
94%
94%
94%
94%
94%
94%
94.5%
94.5%
94.5%
94%
94%
94%
94.5%
94.5%
94.5%
94.5%
94.5%
94.5%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A
3.5A / 115VAC1.65A / 230VAC1.45A / 277VAC
3.5A / 115VAC1.65A / 230VAC1.45A / 277VAC
3.5A / 115VAC1.65A / 230VAC1.45A / 277VAC
COLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VAC
COLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VAC
COLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VAC
CIRCUIT BREAKER1 unit (circuit breaker of type B) / 2 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER1 unit (circuit breaker of type B) / 2 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER1 unit (circuit breaker of type B) / 2 units(circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
LEAKAGE CURRENT
LEAKAGE CURRENT
<0.75mA / 277VAC
<0.75mA / 277VAC
<0.75mA / 277VAC
OVER CURRENTNote.495 ~ 108%
OVER CURRENTNote.495 ~ 108%
OVER CURRENTNote.495 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
PROTECTION
PROTECTIONOVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP.
OVER TEMPERATURE WORKING TEMP.
OVER TEMPERATURE WORKING TEMP.
WORKING HUMIDITY
WORKING HUMIDITY
WORKING HUMIDITY
14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover
14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover
14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover
Shut down and latch off o/p voltage, re-power on to recover
Shut down and latch off o/p voltage, re-power on to recover
Shut down and latch off o/p voltage, re-power on to recover
-40 ~ +70c (Refer to "Derating Curve")
-40 ~ +70c (Refer to "Derating Curve")
-40 ~ +70c (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing
46.5 ~ 53V
46.5 ~ 53V
46.5 ~ 53V
53.5 ~ 60V
53.5 ~ 60V
53.5 ~ 60V
59 ~ 65V
59 ~ 65V
59 ~ 65V
ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS Note.7
SAFETY STANDARDS Note.7
SAFETY STANDARDS Note.7WITHSTAND VOLTAGE
WITHSTAND VOLTAGE
WITHSTAND VOLTAGE
-40 ~ +80c, 10 ~ 95% RH
-40 ~ +80c, 10 ~ 95% RH
-40 ~ +80c, 10 ~ 95% RH
0.03%/c (0 ~ 50c)
0.03%/c (0 ~ 50c)
0.03%/c (0 ~ 50c)
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved
UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved
UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC
SAFETY &
SAFETY &
SAFETY &
EMC
EMC
EMCOTHERS
OTHERS
OTHERS
ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKING
PACKING
PACKING
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B
157.1K hrs min.MIL-HDBK-217F(25c)
157.1K hrs min.MIL-HDBK-217F(25c)
157.1K hrs min.MIL-HDBK-217F(25c)
252*90*43.8mm(L*W*H)
252*90*43.8mm(L*W*H)
252*90*43.8mm(L*W*H)
1.88Kg; 8pcs/16Kg/0.92CUFT
1.88Kg; 8pcs/16Kg/0.92CUFT
1.88Kg; 8pcs/16Kg/0.92CUFTNOTE
NOTE
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25c of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25c of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25c of ambient temperature.
2. Ripple& noise are measured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple& noise are measured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple& noise are measured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and loadregulation.
3. Tolerance : includes set up tolerance, line regulation and loadregulation.
3. Tolerance : includes set up tolerance, line regulation and loadregulation.
4. Please referto "DRIVING METHODS OF LED MODULE".
4. Please referto "DRIVING METHODS OF LED MODULE".
4. Please referto "DRIVING METHODS OF LED MODULE".
5. Derating maybe needed under low inputvoltages. Please check thestatic characteristics for more details.
5. Derating maybe needed under low inputvoltages. Please check thestatic characteristics for more details.
5. Derating maybe needed under low inputvoltages. Please check thestatic characteristics for more details.
6. A type and C typeonly.
6. A type and C typeonly.
6. A type and C typeonly.
7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18.
7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18.
7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18.
8. Length of set up timeis measured at coldfirst start. Turning ON/OFF thepower supply maylead to increase of theset up time.
8. Length of set up timeis measured at coldfirst start. Turning ON/OFF thepower supply maylead to increase of theset up time.
8. Length of set up timeis measured at coldfirst start. Turning ON/OFF thepower supply maylead to increase of theset up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
10.Refer to warranty statement.
10.Refer to warranty statement.
10.Refer to warranty statement.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to themains.
connected to themains.
connected to themains.
File Name:HLG-320H-SPEC2015-08-19
File Name:HLG-320H-SPEC2015-08-19
File Name:HLG-320H-SPEC2015-08-19