100W Single Output Switching Power Supply
100W Single Output Switching Power Supply
100W Single Output Switching Power SupplyFeatures :
Features :
Features :
HLG-100Hseries
HLG-100Hseries
HLG-100Hseries
F110
F110
F110
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Built-in active PFC function
Built-in active PFC function
High efficiency up to 93%
High efficiency up to 93%
High efficiency up to 93%
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Cooling by freeair convection
Cooling by freeair convection
Cooling by freeair convection
OCP point adjustable through output cable or internal potentiometer
OCP point adjustable through output cable or internal potentiometer
OCP point adjustable through output cable or internal potentiometer
IP67/ IP65design for indooror outdoor installations
IP67/ IP65design for indooror outdoor installations
IP67/ IP65design for indooror outdoor installations
Class 2 power unit
Class 2 power unit
Class 2 power unit
TypeHL LED Driver for use in Class I,
TypeHL LED Driver for use in Class I,
TypeHL LED Driver for use in Class I,
Division 2 hazardous location luminaires
Division 2 hazardous location luminaires
Division 2 hazardous location luminaires
Three in onedimming function(1810Vdc or PWM signal or resistance)
Three in onedimming function(1810Vdc or PWM signal or resistance)
Three in onedimming function(1810Vdc or PWM signal or resistance)
Suitable for LED lighting andstreet lighting applications
Suitable for LED lighting andstreet lighting applications
Suitable for LED lighting andstreet lighting applications
Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
Suitable for dry / damp / wet locations
Suitable for dry / damp / wet locations
7 years warranty (Note.10)
7 years warranty (Note.10)
7 years warranty (Note.10)M MSELV IP65 IP67
M MSELV IP65 IP67
M MSELV IP65 IP67
Type HL
Type HL
Type HLHLG-100H-20A
HLG-100H-20A
HLG-100H-20ABlank : IP67rated. Cable for I/O connection.
Blank : IP67rated. Cable for I/O connection.
Blank : IP67rated. Cable for I/O connection.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.
B : IP67 rated.Constant current level adjustable through output cablewith 1810Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated.Timer dimming function, contactMEAN WELL for details.
B : IP67 rated.Constant current level adjustable through output cablewith 1810Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated.Timer dimming function, contactMEAN WELL for details.
B : IP67 rated.Constant current level adjustable through output cablewith 1810Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated.Timer dimming function, contactMEAN WELL for details.SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
HLG-100H-20
HLG-100H-20
HLG-100H-20
HLG-100H-24
HLG-100H-24
HLG-100H-24
HLG-100H-30
HLG-100H-30
HLG-100H-30
HLG-100H-36
HLG-100H-36
HLG-100H-36
HLG-100H-42
HLG-100H-42
HLG-100H-42
HLG-100H-48
HLG-100H-48
HLG-100H-48
HLG-100H-54
HLG-100H-54
HLG-100H-54
DC VOLTAGE
DC VOLTAGE
DC VOLTAGE
20V
20V
20V
24V30V36V
24V30V36V
24V30V36V
42V
42V
42V
48V
48V
48V
54V
54V
54V
CONSTANT CURRENT REGION Note.4 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V
CONSTANT CURRENT REGION Note.4 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V
CONSTANT CURRENT REGION Note.4 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V
21 ~ 42V
21 ~ 42V
21 ~ 42V
24 ~ 48V 27 ~ 54V
24 ~ 48V 27 ~ 54V
24 ~ 48V 27 ~ 54V
RATED CURRENT RATED POWER
RATED CURRENT RATED POWER
RATED CURRENT RATED POWER
4.8A 4A3.2A2.65A
4.8A 4A3.2A2.65A
4.8A 4A3.2A2.65A
96W 96W 96W 95.4W
96W 96W 96W 95.4W
96W 96W 96W 95.4W
2.28A
2.28A
2.28A
95.76W
95.76W
95.76W
2A
2A
2A
96W
96W
96W
1.77A
1.77A
1.77A
95.58W
95.58W
95.58W
RIPPLE & NOISE (max.)Note.2 150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p
RIPPLE & NOISE (max.)Note.2 150mVp-p
VOLTAGE ADJ. RANGE Note.6 17 ~ 22V
VOLTAGE ADJ. RANGE Note.6 17 ~ 22V
VOLTAGE ADJ. RANGE Note.6 17 ~ 22V
150mVp-p
150mVp-p
150mVp-p
22 ~ 27V
22 ~ 27V
22 ~ 27V
200mVp-p
200mVp-p
200mVp-p
27 ~ 33V
27 ~ 33V
27 ~ 33V
200mVp-p
200mVp-p
200mVp-p
33 ~ 40V
33 ~ 40V
33 ~ 40V
200mVp-p
200mVp-p
200mVp-p
38 ~ 46V
38 ~ 46V
38 ~ 46V
200mVp-p
200mVp-p
200mVp-p
43 ~ 53V
43 ~ 53V
43 ~ 53V
200mVp-p
200mVp-p
200mVp-p
49 ~ 58V
49 ~ 58V
49 ~ 58VOUTPUT
OUTPUT
OUTPUTCURRENT ADJ. RANGE
CURRENT ADJ. RANGE
CURRENT ADJ. RANGE
Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only
3 ~ 4.8A2.5 ~ 4A2 ~ 3.2A1.65 ~ 2.65A
3 ~ 4.8A2.5 ~ 4A2 ~ 3.2A1.65 ~ 2.65A
3 ~ 4.8A2.5 ~ 4A2 ~ 3.2A1.65 ~ 2.65A1.4 ~ 2.28A
1.4 ~ 2.28A
1.4 ~ 2.28A1.25 ~ 2A1.1 ~ 1.77A
1.25 ~ 2A1.1 ~ 1.77A
1.25 ~ 2A1.1 ~ 1.77A
VOLTAGE TOLERANCENote.3 1.0% 1.0% 1.0% 1.0%
VOLTAGE TOLERANCENote.3 1.0% 1.0% 1.0% 1.0%
VOLTAGE TOLERANCENote.3 1.0% 1.0% 1.0% 1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIMENote.81200ms,50ms/115VAC500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
SETUP, RISE TIMENote.81200ms,50ms/115VAC500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
SETUP, RISE TIMENote.81200ms,50ms/115VAC500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.)
16ms at full load 230VAC /115VAC
16ms at full load 230VAC /115VAC
16ms at full load 230VAC /115VAC
VOLTAGE RANGENote.590 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGENote.590 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGENote.590 ~ 305VAC127 ~ 431VDCINPUT
INPUT
INPUT
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VACinput and output loading75% at 277VAC input
PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VACinput and output loading75% at 277VAC input
PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VACinput and output loading75% at 277VAC input
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A
93% 93% 93% 93%
93% 93% 93% 93%
93% 93% 93% 93%
1.2A / 115VAC0.55A / 230VAC0.5A / 277VAC
1.2A / 115VAC0.55A / 230VAC0.5A / 277VAC
1.2A / 115VAC0.55A / 230VAC0.5A / 277VAC
COLD START 60A(twidth=415smeasured at 50% Ipeak) at 230VAC
COLD START 60A(twidth=415smeasured at 50% Ipeak) at 230VAC
COLD START 60A(twidth=415smeasured at 50% Ipeak) at 230VAC
93%
93%
93%
93%
93%
93%
93%
93%
93%
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC
LEAKAGE CURRENT OVER CURRENT
LEAKAGE CURRENT OVER CURRENT
LEAKAGE CURRENT OVER CURRENT
SHORT CIRCUIT
SHORT CIRCUIT
SHORT CIRCUIT
<0.75mA / 277VAC
<0.75mA / 277VAC
<0.75mA / 277VAC
95 ~ 106%
95 ~ 106%
95 ~ 106%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
PROTECTION
PROTECTION
PROTECTION
23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V
23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V
23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V
47 ~ 53V
47 ~ 53V
47 ~ 53V
54 ~ 63V
54 ~ 63V
54 ~ 63V
59 ~ 65V
59 ~ 65V
59 ~ 65V
OVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY
ENVIRONMENTSTORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
TEMP. COEFFICIENT
TEMP. COEFFICIENT
VIBRATION
VIBRATION
VIBRATION
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70C (Refer to "Derating Curve")
-40 ~ +70C (Refer to "Derating Curve")
-40 ~ +70C (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing
-40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH
0.03%/C (0 ~ 50C)
0.03%/C (0 ~ 50C)
0.03%/C (0 ~ 50C)
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
SAFETY STANDARDS Note.7 UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
SAFETY STANDARDS Note.7 UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
SAFETY STANDARDS Note.7 UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
design refer to UL60950-1, TUV EN60950-1
design refer to UL60950-1, TUV EN60950-1
design refer to UL60950-1, TUV EN60950-1SAFETY & EMC
SAFETY & EMC
SAFETY & EMCOTHERS
OTHERS
OTHERS
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKING
PACKING
PACKING
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (60% load) ; EN61000-3-3
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (60% load) ; EN61000-3-3
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (60% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A
192.2Khrs min.MIL-HDBK-217F(25C)
192.2Khrs min.MIL-HDBK-217F(25C)
192.2Khrs min.MIL-HDBK-217F(25C)
220*68*38.8mm(L*W*H)
220*68*38.8mm(L*W*H)
220*68*38.8mm(L*W*H)
1.12Kg; 12pcs/14.4Kg/0.74CUFT
1.12Kg; 12pcs/14.4Kg/0.74CUFT
1.12Kg; 12pcs/14.4Kg/0.74CUFTNOTE
NOTE
NOTE
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand 25C of ambient temperature.
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand 25C of ambient temperature.
1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand 25C of ambient temperature.
2. Ripple & noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
2. Ripple & noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
2. Ripple & noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and loadregulation.
3. Tolerance : includes set up tolerance, line regulation and loadregulation.
3. Tolerance : includes set up tolerance, line regulation and loadregulation.
4. Please referto "DRIVING METHODS OF LED MODULE".
4. Please referto "DRIVING METHODS OF LED MODULE".
4. Please referto "DRIVING METHODS OF LED MODULE".
5. Derating maybeneeded under low inputvoltages. Please check thestatic characteristics for more details.
5. Derating maybeneeded under low inputvoltages. Please check thestatic characteristics for more details.
5. Derating maybeneeded under low inputvoltages. Please check thestatic characteristics for more details.
6. A typeonly.
6. A typeonly.
6. A typeonly.
7. Safety and EMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
7. Safety and EMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
7. Safety and EMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.
8. Length of set up timeis measured at cold first start. Turning ON/OFF thepower supply maylead to increase of theset up time.
8. Length of set up timeis measured at cold first start. Turning ON/OFF thepower supply maylead to increase of theset up time.
8. Length of set up timeis measured at cold first start. Turning ON/OFF thepower supply maylead to increase of theset up time.
9. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
9. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
9. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.
10.Refer to warranty statement.
10.Refer to warranty statement.
10.Refer to warranty statement.
11.To fulfill requirements of thelatest ErPregulation for lightingfixtures, this LED power supply can only beused behind a switch withoutpermanently connected to themains.
11.To fulfill requirements of thelatest ErPregulation for lightingfixtures, this LED power supply can only beused behind a switch withoutpermanently connected to themains.
11.To fulfill requirements of thelatest ErPregulation for lightingfixtures, this LED power supply can only beused behind a switch withoutpermanently connected to themains.
File Name:HLG-100H-SPEC 2015-07-23
File Name:HLG-100H-SPEC 2015-07-23
File Name:HLG-100H-SPEC 2015-07-23