HLN-60H-24A HLN60H24A MEANWELL Input: 90-305 AC / 127-431 DC, Output: 1, V1: 24, A1: 2,5

HLN-60H-24A

HLN60H24A

MEANWELL

Available

Ship on today

Input: 90-305 AC / 127-431 DC, Output: 1, V1: 24, A1: 2,5

More details


Power Supplies

LED DRIVERS

HLN

* Brand new produt in its original packing covered by the warranties and certifications provided by MEANWELL

QuantityPrice
1+$42.12
7+$38.19
14+$37.25
20+$36.84
27+$36.54
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



40W Single Output Switching Power Supply 40W Single Output Switching Power Supply
40W Single Output Switching Power Supply Features : Features :
Features : HLN-40Hseries HLN-40Hseries
HLN-40Hseries F 110 F 110
F 110MMSELVIP64 MMSELVIP64
MMSELVIP64 Universal AC input/ Full range (up to 305VAC) Universal AC input/ Full range (up to 305VAC)
Universal AC input/ Full range (up to 305VAC) Built-in active PFC function Built-in active PFC function
Built-in active PFC function Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature
Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Cooling by freeair convection Cooling by freeair convection
Cooling by freeair convection OCP pointadjustable through output cable or internal potentiometer OCP pointadjustable through output cable or internal potentiometer
OCP pointadjustable through output cable or internal potentiometer Fully isolated plastic casewithIP64 level Fully isolated plastic casewithIP64 level
Fully isolated plastic casewithIP64 level Class 2 power unit Class 2 power unit
Class 2 power unit Three in one dimming function (1%10Vdcor PWM signal or resistance) Three in one dimming function (1%10Vdcor PWM signal or resistance)
Three in one dimming function (1%10Vdcor PWM signal or resistance) Suitable for LED lightingand moving signapplications Suitable for LED lightingand moving signapplications
Suitable for LED lightingand moving signapplications Compliance to worldwide safety regulations for lighting Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting Suitable for dry / damp locations or outdoor application Suitable for dry / damp locations or outdoor application
Suitable for dry / damp locations or outdoor application 3 years warranty 3 years warranty
3 years warranty ( for 48V,54V only) ( for 48V,54V only)
( for 48V,54V only) ( exceptfor 48V,54V ) ( exceptfor 48V,54V )
( exceptfor 48V,54V )HLN-40H-12 A HLN-40H-12 A
HLN-40H-12 A A : IP64rated. Output voltage and constant current levelcan beadjusted through internal potentiometer. A : IP64rated. Output voltage and constant current levelcan beadjusted through internal potentiometer.
A : IP64rated. Output voltage and constant current levelcan beadjusted through internal potentiometer. B : IP64rated. Constant current leveladjustable through output cable with 1%10Vdc or 10V PWM signal or resistance. B : IP64rated. Constant current leveladjustable through output cable with 1%10Vdc or 10V PWM signal or resistance.
B : IP64rated. Constant current leveladjustable through output cable with 1%10Vdc or 10V PWM signal or resistance.SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL HLN-40H-12 HLN-40H-15 HLN-40H-20 HLN-40H-24 HLN-40H-30 HLN-40H-36 HLN-40H-42 HLN-40H-48 HLN-40H-54 HLN-40H-12 HLN-40H-15 HLN-40H-20 HLN-40H-24 HLN-40H-30 HLN-40H-36 HLN-40H-42 HLN-40H-48 HLN-40H-54
HLN-40H-12 HLN-40H-15 HLN-40H-20 HLN-40H-24 HLN-40H-30 HLN-40H-36 HLN-40H-42 HLN-40H-48 HLN-40H-54 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 12V 12V
12V 15V 15V
15V 20V 20V
20V 24V 24V
24V 30V 30V
30V 36V 36V
36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.4 7.2 ~12V CONSTANT CURRENT REGION Note.4 7.2 ~12V
CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 9 ~ 15V
9 ~ 15V 12 ~ 20V 12 ~ 20V
12 ~ 20V 14.4 ~ 24V 14.4 ~ 24V
14.4 ~ 24V 18 ~ 30V 18 ~ 30V
18 ~ 30V 21.6 ~ 36V 21.6 ~ 36V
21.6 ~ 36V 25.2 ~ 42V 25.2 ~ 42V
25.2 ~ 42V 28.8 ~ 48V 28.8 ~ 48V
28.8 ~ 48V 32.4 ~ 54V 32.4 ~ 54V
32.4 ~ 54V RATED CURRENT RATED POWER RATED CURRENT RATED POWER
RATED CURRENT RATED POWER 3.33A2.67A2A 1.67A1.34A1.12A 3.33A2.67A2A 1.67A1.34A1.12A
3.33A2.67A2A 1.67A1.34A1.12A 40W40W40W40.1W 40.2W 40.3W 40W40W40W40.1W 40.2W 40.3W
40W40W40W40.1W 40.2W 40.3W 0.96A 0.96A
0.96A 40.3W 40.3W
40.3W 0.84A 0.84A
0.84A 40.3W 40.3W
40.3W 0.75A 0.75A
0.75A 40.5W 40.5W
40.5W RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p
150mVp-p 150mVp-p 150mVp-p
150mVp-p 200mVp-p 200mVp-p
200mVp-p 200mVp-p 200mVp-p
200mVp-p 300mVp-p 300mVp-p
300mVp-p 300mVp-p 300mVp-p
300mVp-p 300mVp-p 300mVp-p
300mVp-p VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V
VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V 13.5 ~ 17V 13.5 ~ 17V
13.5 ~ 17V 17 ~ 22V 17 ~ 22V
17 ~ 22V 22 ~ 27V 22 ~ 27V
22 ~ 27V 27 ~ 33V 27 ~ 33V
27 ~ 33V 33 ~ 40V 33 ~ 40V
33 ~ 40V 40 ~ 46V 40 ~ 46V
40 ~ 46V 44 ~ 53V 44 ~ 53V
44 ~ 53V 49 ~ 58V 49 ~ 58V
49 ~ 58V OUTPUT OUTPUT
OUTPUTCURRENT ADJ. RANGE CURRENT ADJ. RANGE
CURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type only Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only 2 ~ 3.33A1.6 ~ 2.67A 1.2 ~ 2A1 ~ 1.67A0.8 ~ 1.34A 0.67 ~ 1.12A 2 ~ 3.33A1.6 ~ 2.67A 1.2 ~ 2A1 ~ 1.67A0.8 ~ 1.34A 0.67 ~ 1.12A
2 ~ 3.33A1.6 ~ 2.67A 1.2 ~ 2A1 ~ 1.67A0.8 ~ 1.34A 0.67 ~ 1.12A0.58 ~ 0.96A 0.58 ~ 0.96A
0.58 ~ 0.96A0.5 ~ 0.84A 0.45 ~ 0.75A 0.5 ~ 0.84A 0.45 ~ 0.75A
0.5 ~ 0.84A 0.45 ~ 0.75A VOLTAGE TOLERANCE Note.32.5% 2.0% 1.0% 1.0% 1.0% 1.0% VOLTAGE TOLERANCE Note.32.5% 2.0% 1.0% 1.0% 1.0% 1.0%
VOLTAGE TOLERANCE Note.32.5% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5%
2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIME Note.7500ms, 80ms at full load230VAC / 115VAC SETUP, RISE TIME Note.7500ms, 80ms at full load230VAC / 115VAC
SETUP, RISE TIME Note.7500ms, 80ms at full load230VAC / 115VAC HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load 16ms/230VAC 16ms/115VAC at full load
16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER MAX. No. of PSUs on 16A CIRCUIT BREAKER
MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT LEAKAGE CURRENT
LEAKAGE CURRENT 86.5% 86.5% 87.5% 88%88.5% 88.5% 86.5% 86.5% 87.5% 88%88.5% 88.5%
86.5% 86.5% 87.5% 88%88.5% 88.5% 0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC 0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC
0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC
COLD START 50A(twidth=210s measured at 50% Ipeak) at 230VAC12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC
12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC<0.75mA / 277VAC <0.75mA / 277VAC
<0.75mA / 277VAC 88.5% 88.5%
88.5% 89% 89%
89% 89% 89%
89% OVER CURRENTNote.4 95 ~ 108% OVER CURRENTNote.4 95 ~ 108%
OVER CURRENTNote.4 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION PROTECTION
PROTECTION 15 ~ 21V 15 ~ 21V
15 ~ 21V 18 ~ 24V 18 ~ 24V
18 ~ 24V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V
23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V 54 ~ 65V 54 ~ 65V
54 ~ 65V 59 ~ 68V 59 ~ 68V
59 ~ 68VENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY & EMC SAFETY & EMC
SAFETY & EMCOTHERS OTHERS
OTHERS OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATIONSAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDSWITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover -40 ~ +50C (Refer to "Derating Curve") -40 ~ +50C (Refer to "Derating Curve")
-40 ~ +50C (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 40C) 0.03%/C (0 ~ 40C)
0.03%/C (0 ~ 40C) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent, IP64, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1 UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent, IP64, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1
UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent, IP64, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1 I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:0.5KVAC
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A 336.5Khrs min. MIL-HDBK-217F (25C) 336.5Khrs min. MIL-HDBK-217F (25C)
336.5Khrs min. MIL-HDBK-217F (25C) 161*61.5*35mm (L*W*H) 161*61.5*35mm (L*W*H)
161*61.5*35mm (L*W*H) 0.35Kg;32pcs/12.2Kg/1.10CUFT 0.35Kg;32pcs/12.2Kg/1.10CUFT
0.35Kg;32pcs/12.2Kg/1.10CUFTNOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidthby using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidthby using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidthby using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includesset up tolerance, line regulationand load regulation. 3. Tolerance : includesset up tolerance, line regulationand load regulation.
3. Tolerance : includesset up tolerance, line regulationand load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 4. Please refer to "DRIVING METHODS OF LED MODULE".
4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 6. A type only. 6. A type only.
6. A type only. 7. Length of set up time is measured at cold first start.Turning ON/OFF the power supply may lead to increase of the set up time. 7. Length of set up time is measured at cold first start.Turning ON/OFF the power supply may lead to increase of the set up time.
7. Length of set up time is measured at cold first start.Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 8. The power supply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
8. The power supply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 9. To fulfill requirements of the latestErP regulationfor lighting fixtures, this LED power supply can only be used behinda switch without permanently connected to the mains. 9. To fulfill requirements of the latestErP regulationfor lighting fixtures, this LED power supply can only be used behinda switch without permanently connected to the mains.
9. To fulfill requirements of the latestErP regulationfor lighting fixtures, this LED power supply can only be used behinda switch without permanently connected to the mains. File Name:HLN-40H-SPEC 2015-05-28 File Name:HLN-40H-SPEC 2015-05-28
File Name:HLN-40H-SPEC 2015-05-28

Datasheet - PDF

Title:Language:Size:Type:
pdf1-Input: 90-305 AC / 127-431 DC, Output: 1, V1: 24, A1: 2,5 - MEANWELL - HLN-60H-24A - HLN60H24A English201 Kbytespdf1-Input: 90-305 AC / 127-431 DC, Output: 1, V1: 24, A1: 2,5 - MEANWELL - HLN-60H-24A - HLN60H24A

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or