LPF-16-15P MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 15VDC / 1.07A, cable output, IP67

16 W Single Output switching Power supply 16 W Single Output switching Power supply
16 W Single Output switching Power supply LPF-16series LPF-16series
LPF-16seriesFeatures : Features :
Features : UniversalAC input / Full range (up to 305VAC) UniversalAC input / Full range (up to 305VAC)
UniversalAC input / Full range (up to 305VAC) Protections: short circuit / Over current/ Over voltage/ Over temperature Protections: short circuit / Over current/ Over voltage/ Over temperature
Protections: short circuit / Over current/ Over voltage/ Over temperature Built-in active PFC function Built-in active PFC function
Built-in active PFC function Cooling by free air convection Cooling by free air convection
Cooling by free air convection Fully isolated plastic case with IP30 level (Note.8) Fully isolated plastic case with IP30 level (Note.8)
Fully isolated plastic case with IP30 level (Note.8) Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Class 2 power unit Class 2 power unit
Class 2 power unit IP67(optional , model NO. : LPF-16-12 P) IP67(optional , model NO. : LPF-16-12 P)
IP67(optional , model NO. : LPF-16-12 P) Suitable for LED lighting and moving sign applications Suitable for LED lighting and moving sign applications
Suitable for LED lighting and moving sign applications The fulfillment of all the world safetyregulations for the lighting The fulfillment of all the world safetyregulations for the lighting
The fulfillment of all the world safetyregulations for the lighting Suitable for dry / damplocations(wet locationfor LPF-16-12 P) Suitable for dry / damplocations(wet locationfor LPF-16-12 P)
Suitable for dry / damplocations(wet locationfor LPF-16-12 P) 5 years warranty 5 years warranty
5 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION F110 F110
F110 MM SELVIP30 MM SELVIP30
MM SELVIP30 MODEL MODEL
MODEL LPF-16-12LPF-16-15LPF-16-20LPF-16-24LPF-16-30LPF-16-36LPF-16-42LPF-16-48LPF-16-54 LPF-16-12LPF-16-15LPF-16-20LPF-16-24LPF-16-30LPF-16-36LPF-16-42LPF-16-48LPF-16-54
LPF-16-12LPF-16-15LPF-16-20LPF-16-24LPF-16-30LPF-16-36LPF-16-42LPF-16-48LPF-16-54 THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE 12V 12V
12V 15V 15V
15V 20V 20V
20V 24V 24V
24V 30V 30V
30V 36V 36V
36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.4 6.6 ~12V CONSTANT CURRENT REGION Note.4 6.6 ~12V
CONSTANT CURRENT REGION Note.4 6.6 ~12V 8.25 ~ 15V 8.25 ~ 15V
8.25 ~ 15V 11 ~ 20V 11 ~ 20V
11 ~ 20V 13.2 ~ 24V 13.2 ~ 24V
13.2 ~ 24V 16.5 ~ 30V 16.5 ~ 30V
16.5 ~ 30V 19.8 ~ 36V 19.8 ~ 36V
19.8 ~ 36V 23.1 ~ 42V 23.1 ~ 42V
23.1 ~ 42V 26.4 ~ 48V 26.4 ~ 48V
26.4 ~ 48V 29.7 ~ 54V 29.7 ~ 54V
29.7 ~ 54V NOMINAL CURRENT NOMINAL POWER NOMINAL CURRENT NOMINAL POWER
NOMINAL CURRENT NOMINAL POWER 1.34A1.07A0.8A0.67A0.54A0.45A 1.34A1.07A0.8A0.67A0.54A0.45A
1.34A1.07A0.8A0.67A0.54A0.45A 16.08 W 16.05 W 16W16.08W 16.2 W 16.2 W 16.08 W 16.05 W 16W16.08W 16.2 W 16.2 W
16.08 W 16.05 W 16W16.08W 16.2 W 16.2 W 0.39 A 0.39 A
0.39 A 16.38 W 16.38 W
16.38 W 0.34 A 0.34 A
0.34 A 16.32 W 16.32 W
16.32 W 0.3 to 0.3 to
0.3 to 16.2 W 16.2 W
16.2 WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0% VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0%
VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0% 250mVp-p 250mVp-p
250mVp-p 4.0% 4.0%
4.0% 250mVp-p 250mVp-p
250mVp-p 4.0% 4.0%
4.0% 350mVp-p 350mVp-p
350mVp-p 4.0% 4.0%
4.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5%
2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIME Note.61500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC SETUP, RISE TIME Note.61500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC
SETUP, RISE TIME Note.61500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 16ms at full load 230VAC /115VAC 16ms at full load 230VAC /115VAC
16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY (Typ.) AC POWER EFFICIENCY (Typ.) AC POWER
EFFICIENCY (Typ.) AC POWER INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) MAX. No. of the power systems on the 16A CIRCUIT BREAKER MAX. No. of the power systems on the 16A CIRCUIT BREAKER
MAX. No. of the power systems on the 16A CIRCUIT BREAKER THE LEAKAGE CURRENT THE LEAKAGE CURRENT
THE LEAKAGE CURRENT 84% 84% 86% 86% 86% 86% 84% 84% 86% 86% 86% 86%
84% 84% 86% 86% 86% 86% 0.4 A / 115VAC0.25A / 230VAC0.2A/277VAC 0.4 A / 115VAC0.25A / 230VAC0.2A/277VAC
0.4 A / 115VAC0.25A / 230VAC0.2A/277VAC COLD start 45A(twidth=200s measured at 50% Ipeak) at 230VAC COLD start 45A(twidth=200s measured at 50% Ipeak) at 230VAC
COLD start 45A(twidth=200s measured at 50% Ipeak) at 230VAC14 units (circuit breaker type (B) / 24 units (circuit breaker type C) 230VAC 14 units (circuit breaker type (B) / 24 units (circuit breaker type C) 230VAC
14 units (circuit breaker type (B) / 24 units (circuit breaker type C) at 230vac<0.75 mA / 240VAC <0.75 mA / 240VAC
<0.75 mA / 240VAC 86% 86%
86% 86% 86%
86% 86% 86%
The 86% PROTECTION PROTECTION
PROTECTION MOST of CURRENTNote.4 95 ~ 108% MOST of CURRENTNote.4 95 ~ 108%
MOST of CURRENTNote.4 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed.
SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed.OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 15 ~ 18V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V 15 ~ 18V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V
15 ~ 18V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V Protection type : Shut down and latch off o/p voltage, re-power on to recover Protection type : Shut down and latch off o/p voltage, re-power on to recover
Protection type : Shut down and latch off o/p voltage, re-power on to recover 46 ~ 54V 46 ~ 54V
46 ~ 54V 54 ~ 63V 54 ~ 63V
54 ~ 63V 59 ~ 66V 59 ~ 66V
59 ~ 66V Over TEMPERATURE shut down o/p voltage, recovers automatically after temperature goes down Over TEMPERATURE shut down o/p voltage, recovers automatically after temperature goes down
Over TEMPERATURE shut down o/p voltage, recovers automatically after temperature goes downENVIRONMENT ENVIRONMENT
ENVIRONMENT WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT OF VIBRATIONSAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -35 ~ +70 (Refer to "Reduction Curve") -35 ~ +70 (Refer to "Reduction Curve")
-35 ~ +70 (Refer to "Reduction Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 50 ° C) 0.03%/C (0 ~ 50 ° C)
0.03%/C (0 ~ 50 ° C) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, y, Z axes 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, y, Z axes
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, y, Z axes UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1 UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1
UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1 SECURITY and SECURITY and
SECURITY and WITHSTAND VOLTAGEI/P-O/P:3.75 KVAC WITHSTAND VOLTAGEI/P-O/P:3.75 KVAC
WITHSTAND VOLTAGEI/P-O/P:3.75 KVAC EMC EMC
EMC OTHER OTHER
OTHER ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015; EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN55015; EN61000-3-2 Class C (50% load) ; EN61000-3-3
Compliance to EN55015; EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV),criteria A 473.3 Khrs min.MIL-HDBK-217F (25C) 473.3 Khrs min.MIL-HDBK-217F (25C)
473.3 Khrs min.MIL-HDBK-217F (25C) 148*40*32 mm (L*W*H) 148*40*32 mm (L*W*H)
148*40*32 mm (L*W*H) 0.21 Kg; 40pcs/9.4 Kg/1.02 CUFT 0.21 Kg; 40pcs/9.4 Kg/1.02 CUFT
0.21 Kg; 40pcs/9.4 Kg/1.02 CUFT NOTE NOTE
NOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Constant currentoperation region is within 50% .100% ratedoutput voltage.This is the suitable operation region for LED related applications, but please reconfirm special electricalrequirements for some specific system design. 4. Constant currentoperation region is within 50% .100% ratedoutput voltage.This is the suitable operation region for LED related applications, but please reconfirm special electricalrequirements for some specific system design.
4. Constant currentoperation region is within 50% .100% ratedoutput voltage.This is the suitable operation region for LED related applications, but please reconfirm special electricalrequirements for some specific system design. 5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 6. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time. 6. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time.
6. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time. 7. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 7. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
7. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 8. Suitable for indoor use. 8. Suitable for indoor use.
8. Suitable for indoor use. 9.To comply with the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently 9.To comply with the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
9.To comply with the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the electrical grid. connected to the electrical grid.
connected to the electrical grid.File name:LPF-16-SPEC2015-05-28 File name:LPF-16-SPEC2015-05-28
File name:LPF-16-SPEC2015-05-28