12W AC-DCIndustrialAdaptorGS12Useries
12W AC-DCIndustrialAdaptorGS12Useries
12W AC-DCIndustrialAdaptorGS12Useries
Features :
Features :
Features :
UniversalAC input / Full range
UniversalAC input / Full range
UniversalAC input / Full range
Do not load powerconsumptione 0.3 W
Do not load powerconsumptione 0.3 W
Do not load powerconsumptione 0.3 W
EnergyefficiencyLevelV
EnergyefficiencyLevelV
EnergyefficiencyLevelV
To comply with EISA 2007
To comply with EISA 2007
To comply with EISA 2007
2 pole USA plug
2 pole USA plug
2 pole USA plug
Class II power(without earthpin)
Class II power(without earthpin)
Class II power(without earthpin)
Protections: short circuit / Overload / Over Voltage / Over temperature
Protections: short circuit / Overload / Over Voltage / Over temperature
Protections: short circuit / Overload / Over Voltage / Over temperature
Pass LPS
Pass LPS
Pass LPS
Fully enclosed plastic case
Fully enclosed plastic case
Fully enclosed plastic case
2 years warranty
2 years warranty
2 years warranty
SPECIFICATION
SPECIFICATION
SPECIFICATION
ORDER NO.
ORDER NO.
ORDER NO.
GS12U05-P1IGS12U07-P1IGS12U09-P1IGS12U12-P1IGS12U15-P1IGS12U18-P1IGS12U24-P1I
GS12U05-P1IGS12U07-P1IGS12U09-P1IGS12U12-P1IGS12U15-P1IGS12U18-P1IGS12U24-P1I
GS12U05-P1IGS12U07-P1IGS12U09-P1IGS12U12-P1IGS12U15-P1IGS12U18-P1IGS12U24-P1I
SECURITY MODEL NO. THE DC VOLTAGE
SECURITY MODEL NO. THE DC VOLTAGE
SECURITY MODEL NO. THE DC VOLTAGE
RATED CURRENT
RATED CURRENT
RATED CURRENT
CURRENT RANGE
CURRENT RANGE
CURRENT RANGE
GS12U05
GS12U05
GS12U05
5V
5V
5V
2.0 A
2.0 A
2.0 A
0 ~ 2.0
0 ~ 2.0
0 ~ 2.0
GS12U07
GS12U07
GS12U07
7.5 V
7.5 V
7.5 V
1.6
1.6
1.6
0 ~ 1.6
0 ~ 1.6
0 ~ 1.6
GS12U09
GS12U09
GS12U09
9V
9V
9V
1.33 A
1.33 A
1.33 A
0 ~ 1.33 A
0 ~ 1.33 A
0 ~ 1.33 A
GS12U12 GS12U15 GS12U18 GS12U24
GS12U12 GS12U15 GS12U18 GS12U24
GS12U12 GS12U15 GS12U18 GS12U24
12V15V 18V24V
12V15V 18V24V
12V15V 18V24V
1.0 A 0.8 A 0.67 A 0.5 A
1.0 A 0.8 A 0.67 A 0.5 A
1.0 A 0.8 A 0.67 A 0.5 A
0 ~ 1.0 0 ~ 0.8 0 ~ 0.67 0 ~ 0.5 To
0 ~ 1.0 0 ~ 0.8 0 ~ 0.67 0 ~ 0.5 To
0 ~ 1.0 0 ~ 0.8 0 ~ 0.67 0 ~ 0.5 AOUTPUT
OUTPUT
OUTPUT
RATED POWER
RATED POWER
RATED POWER
10W
10W
10W
12W
12W
12W
12W
12W
12W
12W 12W
12W 12W
12W 12W
12.06W12W
12.06W12W
12.06W12W
RIPPLE & NOISE (max.) Note.2 75mVp-p
RIPPLE & NOISE (max.) Note.2 75mVp-p
RIPPLE & NOISE (max.) Note.2 75mVp-p
90mVp-p
90mVp-p
90mVp-p
90mVp-p
90mVp-p
90mVp-p
120mVp-p150mVp-p180mVp-p200mVp-p
120mVp-p150mVp-p180mVp-p200mVp-p
120mVp-p150mVp-p180mVp-p200mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
VOLTAGE TOLERANCE Note.3 5.0%
VOLTAGE TOLERANCE Note.3 5.0%
4.0%
4.0%
4.0%
4.0%
4.0%
4.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%3.0%
3.0%3.0%
3.0%3.0%
LINE REGULATIONNote.41.0%1.0%1.0%1.0%1.0%
LINE REGULATIONNote.41.0%1.0%1.0%1.0%1.0%
LINE REGULATIONNote.41.0%1.0%1.0%1.0%1.0%
1.0%1.0%
1.0%1.0%
1.0%1.0%
LOAD REGULATIONNote.55.0%
LOAD REGULATIONNote.55.0%
LOAD REGULATIONNote.55.0%
4.0%
4.0%
4.0%
4.0%
4.0%
4.0%
3.0%
3.0%
3.0%
3.0%2.0%2.0%
3.0%2.0%2.0%
3.0%2.0%2.0%
SETUP, RISE, HOLD TIME VOLTAGE RANGE
SETUP, RISE, HOLD TIME VOLTAGE RANGE
SETUP, RISE, HOLD TIME VOLTAGE RANGE
FREQUENCY RANGE
FREQUENCY RANGE
FREQUENCY RANGE
500ms, 20ms, 30ms/230VAC 500ms, 20 ms, 10 ms/115VACat full load
500ms, 20ms, 30ms/230VAC 500ms, 20 ms, 10 ms/115VACat full load
500ms, 20ms, 30ms/230VAC 500ms, 20 ms, 10 ms/115VACat full load
90 ~ 264VAC135 ~ 370VDC
90 ~ 264VAC135 ~ 370VDC
90 ~ 264VAC135 ~ 370VDC
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63HzINPUT
INPUT
INPUT
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
76%
76%
76%
78.5% of
78.5% of
78.5% of
78.5% of
78.5% of
78.5% of
78.5% 80%80% 80.5%
78.5% 80%80% 80.5%
78.5% 80%80% 80.5%
PROTECTION
PROTECTION
PROTECTION
AC POWER
AC POWER
AC POWER
Input CURRENT (max.) The LEAKAGE CURRENT (max.)
Input CURRENT (max.) The LEAKAGE CURRENT (max.)
Input CURRENT (max.) The LEAKAGE CURRENT (max.)
OVERLOAD, OVER VOLTAGE
OVERLOAD, OVER VOLTAGE
OVERLOAD, OVER VOLTAGE
MOST of TEMPERATURENote.6
MOST of TEMPERATURENote.6
MOST of TEMPERATURENote.6WORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY
0.31 A / 115VAC 0.16 A / 230VAC
0.31 A / 115VAC 0.16 A / 230VAC
0.31 A / 115VAC 0.16 A / 230VAC
COLD START 25A / 115VAC45A / 230VAC
COLD START 25A / 115VAC45A / 230VAC
COLD START 25A / 115VAC45A / 230VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
>105%rated output power
>105%rated output power
>105%rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
115% ~ 135%
115% ~ 135%
115% ~ 135%
Protection type : Clamp by zener diode
Protection type : Clamp by zener diode
Protection type : Clamp by zener diode
U1 Tj 140 typically (U1) Detect on main control IC
U1 Tj 140 typically (U1) Detect on main control IC
U1 Tj 140 typically (U1) Detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve")
20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY STANDARDS
SAFETY STANDARDS
-20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH
0.03% /(0 ~ 40)
0.03% /(0 ~ 40)
0.03% /(0 ~ 40)
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
UL60950-1, CSA22.2, BSMI CNS14336 approved
UL60950-1, CSA22.2, BSMI CNS14336 approved
UL60950-1, CSA22.2, BSMI CNS14336 approved
SAFETY AND EMC
SAFETY AND EMC
SAFETY AND EMC
OTHER
OTHER
OTHER
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
MTBF
MTBF
MTBF
DIMENSION
DIMENSION
DIMENSION
I/P-O/P:3KVAC
I/P-O/P:3KVAC
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
1414.6 Khrs min.MIL-HDBK-217F (25)
1414.6 Khrs min.MIL-HDBK-217F (25)
1414.6 Khrs min.MIL-HDBK-217F (25)
65*47*26.5 mm (L*W*H)
65*47*26.5 mm (L*W*H)
65*47*26.5 mm (L*W*H)
PACKING0.15Kg ; 100pcs / 16Kg / CARTON
PACKING0.15Kg ; 100pcs / 16Kg / CARTON
PACKING0.15Kg ; 100pcs / 16Kg / CARTONCONNECTOR
CONNECTOR
CONNECTOR
PLUG THE CABLE
PLUG THE CABLE
PLUG THE CABLE
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE
NOTE
NOTE
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
2.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
2.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
2.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Tolerance: includes set up tolerance, line regulation, load regulation.
3.Tolerance: includes set up tolerance, line regulation, load regulation.
3.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Line regulation is measured from low line to high line at rated load.
4.Line regulation is measured from low line to high line at rated load.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation is measured from 10% to 100% of the rated load.
5.Load regulation is measured from 10% to 100% of the rated load.
5.Load regulation is measured from 10% to 100% of the rated load.
6.The over temperature protection (OTP) is the integrated function of the control IC (U1). The activating level described above is based on the specification
6.The over temperature protection (OTP) is the integrated function of the control IC (U1). The activating level described above is based on the specification
6.The over temperature protection (OTP) is the integrated function of the control IC (U1). The activating level described above is based on the specification
providedby the ic manufacturer.
providedby the ic manufacturer.
providedby the ic manufacturer.
File name:GS12U-SPEC2015-05-20
File name:GS12U-SPEC2015-05-20
File name:GS12U-SPEC2015-05-20