GS12U05-P1I MEANWELL AC-DC Wall mount adaptor, Output 5VDC / 2A, Input USA plug

12W AC-DCIndustrialAdaptorGS12Useries 12W AC-DCIndustrialAdaptorGS12Useries
12W AC-DCIndustrialAdaptorGS12Useries Features : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Do not load powerconsumptione 0.3 W Do not load powerconsumptione 0.3 W
Do not load powerconsumptione 0.3 W EnergyefficiencyLevelV EnergyefficiencyLevelV
EnergyefficiencyLevelV To comply with EISA 2007 To comply with EISA 2007
To comply with EISA 2007 2 pole USA plug 2 pole USA plug
2 pole USA plug Class II power(without earthpin) Class II power(without earthpin)
Class II power(without earthpin) Protections: short circuit / Overload / Over Voltage / Over temperature Protections: short circuit / Overload / Over Voltage / Over temperature
Protections: short circuit / Overload / Over Voltage / Over temperature Pass LPS Pass LPS
Pass LPS Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. GS12U05-P1IGS12U07-P1IGS12U09-P1IGS12U12-P1IGS12U15-P1IGS12U18-P1IGS12U24-P1I GS12U05-P1IGS12U07-P1IGS12U09-P1IGS12U12-P1IGS12U15-P1IGS12U18-P1IGS12U24-P1I
GS12U05-P1IGS12U07-P1IGS12U09-P1IGS12U12-P1IGS12U15-P1IGS12U18-P1IGS12U24-P1I SECURITY MODEL NO. THE DC VOLTAGE SECURITY MODEL NO. THE DC VOLTAGE
SECURITY MODEL NO. THE DC VOLTAGE RATED CURRENT RATED CURRENT
RATED CURRENT CURRENT RANGE CURRENT RANGE
CURRENT RANGE GS12U05 GS12U05
GS12U05 5V 5V
5V 2.0 A 2.0 A
2.0 A 0 ~ 2.0 0 ~ 2.0
0 ~ 2.0 GS12U07 GS12U07
GS12U07 7.5 V 7.5 V
7.5 V 1.6 1.6
1.6 0 ~ 1.6 0 ~ 1.6
0 ~ 1.6 GS12U09 GS12U09
GS12U09 9V 9V
9V 1.33 A 1.33 A
1.33 A 0 ~ 1.33 A 0 ~ 1.33 A
0 ~ 1.33 A GS12U12 GS12U15 GS12U18 GS12U24 GS12U12 GS12U15 GS12U18 GS12U24
GS12U12 GS12U15 GS12U18 GS12U24 12V15V 18V24V 12V15V 18V24V
12V15V 18V24V 1.0 A 0.8 A 0.67 A 0.5 A 1.0 A 0.8 A 0.67 A 0.5 A
1.0 A 0.8 A 0.67 A 0.5 A 0 ~ 1.0 0 ~ 0.8 0 ~ 0.67 0 ~ 0.5 To 0 ~ 1.0 0 ~ 0.8 0 ~ 0.67 0 ~ 0.5 To
0 ~ 1.0 0 ~ 0.8 0 ~ 0.67 0 ~ 0.5 AOUTPUT OUTPUT
OUTPUT RATED POWER RATED POWER
RATED POWER 10W 10W
10W 12W 12W
12W 12W 12W
12W 12W 12W 12W 12W
12W 12W 12.06W12W 12.06W12W
12.06W12W RIPPLE & NOISE (max.) Note.2 75mVp-p RIPPLE & NOISE (max.) Note.2 75mVp-p
RIPPLE & NOISE (max.) Note.2 75mVp-p 90mVp-p 90mVp-p
90mVp-p 90mVp-p 90mVp-p
90mVp-p 120mVp-p150mVp-p180mVp-p200mVp-p 120mVp-p150mVp-p180mVp-p200mVp-p
120mVp-p150mVp-p180mVp-p200mVp-p VOLTAGE TOLERANCE Note.3 5.0% VOLTAGE TOLERANCE Note.3 5.0%
VOLTAGE TOLERANCE Note.3 5.0% 4.0% 4.0%
4.0% 4.0% 4.0%
4.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 3.0%3.0% 3.0%3.0%
3.0%3.0% LINE REGULATIONNote.41.0%1.0%1.0%1.0%1.0% LINE REGULATIONNote.41.0%1.0%1.0%1.0%1.0%
LINE REGULATIONNote.41.0%1.0%1.0%1.0%1.0% 1.0%1.0% 1.0%1.0%
1.0%1.0% LOAD REGULATIONNote.55.0% LOAD REGULATIONNote.55.0%
LOAD REGULATIONNote.55.0% 4.0% 4.0%
4.0% 4.0% 4.0%
4.0% 3.0% 3.0%
3.0% 3.0%2.0%2.0% 3.0%2.0%2.0%
3.0%2.0%2.0% SETUP, RISE, HOLD TIME VOLTAGE RANGE SETUP, RISE, HOLD TIME VOLTAGE RANGE
SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGE
FREQUENCY RANGE 500ms, 20ms, 30ms/230VAC 500ms, 20 ms, 10 ms/115VACat full load 500ms, 20ms, 30ms/230VAC 500ms, 20 ms, 10 ms/115VACat full load
500ms, 20ms, 30ms/230VAC 500ms, 20 ms, 10 ms/115VACat full load 90 ~ 264VAC135 ~ 370VDC 90 ~ 264VAC135 ~ 370VDC
90 ~ 264VAC135 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63HzINPUT INPUT
INPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)
EFFICIENCY (Typ.) 76% 76%
76% 78.5% of 78.5% of
78.5% of 78.5% of 78.5% of
78.5% of 78.5% 80%80% 80.5% 78.5% 80%80% 80.5%
78.5% 80%80% 80.5% PROTECTION PROTECTION
PROTECTION AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT (max.) Input CURRENT (max.) The LEAKAGE CURRENT (max.)
Input CURRENT (max.) The LEAKAGE CURRENT (max.) OVERLOAD, OVER VOLTAGE OVERLOAD, OVER VOLTAGE
OVERLOAD, OVER VOLTAGE MOST of TEMPERATURENote.6 MOST of TEMPERATURENote.6
MOST of TEMPERATURENote.6WORKING TEMP. WORKING HUMIDITY WORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY 0.31 A / 115VAC 0.16 A / 230VAC 0.31 A / 115VAC 0.16 A / 230VAC
0.31 A / 115VAC 0.16 A / 230VAC COLD START 25A / 115VAC45A / 230VAC COLD START 25A / 115VAC45A / 230VAC
COLD START 25A / 115VAC45A / 230VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC >105%rated output power >105%rated output power
>105%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% 115% ~ 135%
115% ~ 135% Protection type : Clamp by zener diode Protection type : Clamp by zener diode
Protection type : Clamp by zener diode U1 Tj 140 typically (U1) Detect on main control IC U1 Tj 140 typically (U1) Detect on main control IC
U1 Tj 140 typically (U1) Detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +50 (Refer to "Reduction Curve") 0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03% /(0 ~ 40) 0.03% /(0 ~ 40)
0.03% /(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, CSA22.2, BSMI CNS14336 approved UL60950-1, CSA22.2, BSMI CNS14336 approved
UL60950-1, CSA22.2, BSMI CNS14336 approved SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC OTHER OTHER
OTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION MTBF MTBF
MTBF DIMENSION DIMENSION
DIMENSION I/P-O/P:3KVAC I/P-O/P:3KVAC
I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B 1414.6 Khrs min.MIL-HDBK-217F (25) 1414.6 Khrs min.MIL-HDBK-217F (25)
1414.6 Khrs min.MIL-HDBK-217F (25) 65*47*26.5 mm (L*W*H) 65*47*26.5 mm (L*W*H)
65*47*26.5 mm (L*W*H) PACKING0.15Kg ; 100pcs / 16Kg / CARTON PACKING0.15Kg ; 100pcs / 16Kg / CARTON
PACKING0.15Kg ; 100pcs / 16Kg / CARTONCONNECTOR CONNECTOR
CONNECTOR PLUG THE CABLE PLUG THE CABLE
PLUG THE CABLE See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE NOTE
NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 2.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 2.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
2.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 3.Tolerance: includes set up tolerance, line regulation, load regulation.
3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 4.Line regulation is measured from low line to high line at rated load.
4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 10% to 100% of the rated load. 5.Load regulation is measured from 10% to 100% of the rated load.
5.Load regulation is measured from 10% to 100% of the rated load. 6.The over temperature protection (OTP) is the integrated function of the control IC (U1). The activating level described above is based on the specification 6.The over temperature protection (OTP) is the integrated function of the control IC (U1). The activating level described above is based on the specification
6.The over temperature protection (OTP) is the integrated function of the control IC (U1). The activating level described above is based on the specification providedby the ic manufacturer. providedby the ic manufacturer.
providedby the ic manufacturer. File name:GS12U-SPEC2015-05-20 File name:GS12U-SPEC2015-05-20
File name:GS12U-SPEC2015-05-20