15W AC-DCIndustrialAdaptorGS15Useries
15W AC-DCIndustrialAdaptorGS15Useries
15W AC-DCIndustrialAdaptorGS15UseriesFeatures :
Features :
Features :
UniversalAC input / Full range
UniversalAC input / Full range
UniversalAC input / Full range
2 pole USA plug
2 pole USA plug
2 pole USA plug
No load powerconsumption <0.075 W
No load powerconsumption <0.075 W
No load powerconsumption <0.075 W
The Energy Efficiency Level Of
The Energy Efficiency Level Of
The Energy Efficiency Level Of
To comply with EISA 2007/us DoE
To comply with EISA 2007/us DoE
To comply with EISA 2007/us DoE
Class II power(without earthpin)
Class II power(without earthpin)
Class II power(without earthpin)
Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage
Pass LPS
Pass LPS
Pass LPS
Fully enclosed plastic case
Fully enclosed plastic case
Fully enclosed plastic case
2 years warranty
2 years warranty
2 years warranty
SPECIFICATION
SPECIFICATION
SPECIFICATION
ORDER NO.
ORDER NO.
ORDER NO.
SECURITY MODEL NO.
SECURITY MODEL NO.
SECURITY MODEL NO.
GS15U-1P1J GS15U-11P1J GS15U-2P1J GS15U-3P1J GS15U-4P1J GS15U-5P1J GS15U-6P1J GS15U-8P1J
GS15U-1P1J GS15U-11P1J GS15U-2P1J GS15U-3P1J GS15U-4P1J GS15U-5P1J GS15U-6P1J GS15U-8P1J
GS15U-1P1J GS15U-11P1J GS15U-2P1J GS15U-3P1J GS15U-4P1J GS15U-5P1J GS15U-6P1J GS15U-8P1J
GS15U-1 GS15U-1-1GS15U-2 GS15U-3 GS15U-4 GS15U-5 GS15U-6 GS15U-8
GS15U-1 GS15U-1-1GS15U-2 GS15U-3 GS15U-4 GS15U-5 GS15U-6 GS15U-8
GS15U-1 GS15U-1-1GS15U-2 GS15U-3 GS15U-4 GS15U-5 GS15U-6 GS15U-8
DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V
DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V
DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48VOUTPUT
OUTPUT
OUTPUT
RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER
2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A
2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A
2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A
0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A
0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A
0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A
12W 12W 15W 15W 15W 15W 15W 15W
12W 12W 15W 15W 15W 15W 15W 15W
12W 12W 15W 15W 15W 15W 15W 15W
RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p
RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p
RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p
VOLTAGE TOLERANCE Note.45.0%
VOLTAGE TOLERANCE Note.45.0%
VOLTAGE TOLERANCE Note.45.0%
5.0%
5.0%
5.0%
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
2.0%2.0%
2.0%2.0%
2.0%2.0%
LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
LOAD REGULATIONNote.6 5.0%
LOAD REGULATIONNote.6 5.0%
LOAD REGULATIONNote.6 5.0%
5.0%
5.0%
5.0%
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
2.0%
2.0%
2.0%
INPUT
INPUT
INPUTPROTECTION
PROTECTION
PROTECTION
ENVIRONMENT
ENVIRONMENT
ENVIRONMENTSAFETY & EMC
SAFETY AND EMC
SAFETY AND EMC
(Note. 7)
(Note. 7)
(Note. 7)
OTHER CONNECTOR
OTHER CONNECTOR
OTHER CONNECTOR
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
AC POWER
AC POWER
AC POWER
Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of
The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP.
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG
CABLE
CABLE
CABLE
3000ms, 50ms, 16msat full load
3000ms, 50ms, 16msat full load
3000ms, 50ms, 16msat full load
90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
80%82.5%85%85%85%85%85.5%87%
80%82.5%85%85%85%85%85.5%87%
80%82.5%85%85%85%85%85.5%87%
0.5 A / 100VAC
0.5 A / 100VAC
0.5 A / 100VAC
50A /230VAC
50A /230VAC
50A /230VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
105 ~ 250%rated output power
105 ~ 250%rated output power
105 ~ 250%rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
>120% of the nominal output voltage
>120% of the nominal output voltage
>120% of the nominal output voltage
Protection type : Clamp by zener diode
Protection type : Clamp by zener diode
Protection type : Clamp by zener diode
0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve")
20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing
-20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH
0.03%/(0 ~ 40)
0.03%/(0 ~ 40)
0.03%/(0 ~ 40)
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
UL60950-1, CSA C22.2 approved
UL60950-1, CSA C22.2 approved
UL60950-1, CSA C22.2 approved
I/P-O/P:3KVAC
I/P-O/P:3KVAC
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B
500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25)
34*71*50mm (L*W*H)
34*71*50mm (L*W*H)
34*71*50mm (L*W*H)
150g ; 84pcs / 14Kg / CARTON
150g ; 84pcs / 14Kg / CARTON
150g ; 84pcs / 14Kg / CARTON
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
NOTE
NOTE
NOTE
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load.
6.Loadregulation is measured from 0% to 100% ratedload.
6.Loadregulation is measured from 0% to 100% ratedload.
6.Loadregulation is measured from 0% to 100% ratedload.
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
(asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)File Name:GS15U-SPEC2015-10-02
File name:GS15U-SPEC2015-10-02
File name:GS15U-SPEC2015-10-02