GS06E-4P1J MEANWELL AC-DC Wall mount adaptor, Output 15VDC / 0.4A, Input European plug

6W AC-DCIndustrialAdaptorGS06Eseries 6W AC-DCIndustrialAdaptorGS06Eseries
6W AC-DCIndustrialAdaptorGS06Eseries Features : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range 2 pole EURO plug 2 pole EURO plug
2 pole EURO plug No load powerconsumption <0.075 W No load powerconsumption <0.075 W
No load powerconsumption <0.075 W The Energy Efficiency Level Of The Energy Efficiency Level Of
The Energy Efficiency Level Of To comply with the EU ErP and meetCoC version5 To comply with the EU ErP and meetCoC version5
To comply with the EU ErP and meetCoC version5 Class II power(without earthpin) Class II power(without earthpin)
Class II power(without earthpin) Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Pass LPS Pass LPS
Pass LPS Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS06E-1P1J GS06E-11P1J GS06E-2P1J GS06E-3P1J GS06E-4P1J GS06E-5P1J GS06E-6P1J GS06E-8P1J GS06E-1P1J GS06E-11P1J GS06E-2P1J GS06E-3P1J GS06E-4P1J GS06E-5P1J GS06E-6P1J GS06E-8P1J
GS06E-1P1J GS06E-11P1J GS06E-2P1J GS06E-3P1J GS06E-4P1J GS06E-5P1J GS06E-6P1J GS06E-8P1J GS06E-1GS06E-1-1GS06E-2GS06E-3GS06E-4GS06E-5GS06E-6GS06E-8 GS06E-1GS06E-1-1GS06E-2GS06E-3GS06E-4GS06E-5GS06E-6GS06E-8
GS06E-1GS06E-1-1GS06E-2GS06E-3GS06E-4GS06E-5GS06E-6GS06E-8 DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V
DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48VOUTPUT OUTPUT
OUTPUT RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER 1.00 0.8 A 0.66 A 0.5 A 0.4 A 0.33 A 0.25 A 0.125 A 1.00 0.8 A 0.66 A 0.5 A 0.4 A 0.33 A 0.25 A 0.125 A
1.00 0.8 A 0.66 A 0.5 A 0.4 A 0.33 A 0.25 A 0.125 A 0 ~ 1.00 0 ~ 0.8 0 ~ 0.66 0 ~ 0.5 0 ~ 0.4 0 ~ 0.33 0 ~ 0.25 0 ~ 0.125 A 0 ~ 1.00 0 ~ 0.8 0 ~ 0.66 0 ~ 0.5 0 ~ 0.4 0 ~ 0.33 0 ~ 0.25 0 ~ 0.125 A
0 ~ 1.00 0 ~ 0.8 0 ~ 0.66 0 ~ 0.5 0 ~ 0.4 0 ~ 0.33 0 ~ 0.25 0 ~ 0.125 A 5W6W6W6W6W6W6W6W 5W6W6W6W6W6W6W6W
5W6W6W6W6W6W6W6W RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p180mVp-p200mVp-p RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p180mVp-p200mVp-p
RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p180mVp-p200mVp-p VOLTAGE TOLERANCE Note.45.0% VOLTAGE TOLERANCE Note.45.0%
VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0%
5.0% 5.0% 5.0%
5.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LOAD REGULATIONNote.6 5.0% LOAD REGULATIONNote.6 5.0%
LOAD REGULATIONNote.6 5.0% 5.0% 5.0%
5.0% 5.0% 5.0%
5.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITY
WORKING HUMIDITY 1000ms, 50ms, 12msat full load 1000ms, 50ms, 12msat full load
1000ms, 50ms, 12msat full load 90 ~ 264VAC 127 ~ 370VDC 90 ~ 264VAC 127 ~ 370VDC
90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 68%74%75%77%78%78%82%84% 68%74%75%77%78%78%82%84%
68%74%75%77%78%78%82%84% 0.2 A / 100VAC 0.2 A / 100VAC
0.2 A / 100VAC 50A /230VAC 50A /230VAC
50A /230VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC >105% rated output power for 5V ; >110% rated output power for 7.5 ~ 48V >105% rated output power for 5V ; >110% rated output power for 7.5 ~ 48V
>105% rated output power for 5V ; >110% rated output power for 7.5 ~ 48V Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% of the nominal output voltage >120% of the nominal output voltage
>120% of the nominal output voltage Protection type : Clamp by zener diode Protection type : Clamp by zener diode
Protection type : Clamp by zener diode 0 ~ +40(Refer to the "Reduction Curve") 0 ~ +40(Refer to the "Reduction Curve")
0 ~ +40(Refer to the "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENT STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENT STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)
0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes TUV EN60950-1 approved TUV EN60950-1 approved
TUV EN60950-1 approved SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note. 7) (Note. 7)
(Note. 7)OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION PACKING MTBF DIMENSION PACKING
MTBF DIMENSION PACKING PLUG PLUG
PLUG CABLE CABLE
CABLE I/P-O/P:4242VDC FROM I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 class B, EN61000-3-2,3 I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 class B, EN61000-3-2,3
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 class B, EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min.MIL-HDBK-217F(25) 500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25) 32*66*42.5 mm (L*W*H) 32*66*42.5 mm (L*W*H)
32*66*42.5 mm (L*W*H) 100g ; 90pcs / 10Kg / CARTON 100g ; 90pcs / 10Kg / CARTON
100g ; 90pcs / 10Kg / CARTON See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested NOTE NOTE
NOTE 1.All parameters are specified at 230vac input, rated load, 25 70% rh ambient. 1.All parameters are specified at 230vac input, rated load, 25 70% rh ambient.
1.All parameters are specified at 230vac input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 0% to 100% ratedload 6.Loadregulation is measured from 0% to 100% ratedload
6.Loadregulation is measured from 0% to 100% ratedload 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) File name:GS06E-SPEC2015-09-15 File name:GS06E-SPEC2015-09-15
File name:GS06E-SPEC2015-09-15